Skip to contentSkip to conversation

Building only the app and not the Linux core

DISCUSSION [email protected] 3 participants 7 messages Nov 12, 2019 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi all,

I would like to build my yocto project, but only my applications. I mean, I would like to separate my Linux build and the application build. I want to just have my meta-layer which contains my application being build by calling the bitbake command.
Can anyone give me a pointer? Using the multiconfig is the way to do it?

Best
Em

P.S. If I want to be more specific, I just want to use Yocto as a cross-compilation tool for baremetal applications.

#2 lore raw
Quoted 8 lines · On Tue, 12 Nov 2019, at 15:33, [email protected] wrote:

Hi all,

I would like to build my yocto project, but only my applications. I mean, I would like to separate my Linux build and the application build. I want to just have my meta-layer which contains my application being build by calling the bitbake command.
Can anyone give me a pointer? Using the multiconfig is the way to do it?

Quoted 5 lines

Best
Em

P.S. If I want to be more specific, I just want to use Yocto as a cross-compilation tool for baremetal applications.

You could start by looking at how meta-freertos (https://github.com/aehs29/meta-freertos) achieves this. It has support for running the resulting bare-metal app under qemu which you might not need, but the rest of freertos-image.bbclass is probably a good reference.

Signature · 1 line
Paul Barker
#3 lore raw

Hi Paul,
thanks for your help. I did it based on the FreeRTOS. Here is how the result looks like:
Under "yocto/build-mb/tmp/work" I have the follwoings:
core2-64-poky-linux
x86_64-linux

and in "core2-64-poky-linux" which I don't where it gets its name, I have my binary:core2-64-poky-linux/microblaze-demo/1.0-r0/test.elf

My question now is, how can I avoid hassle of building the x86_64-linux? I just need my test.elf file. BestEm

    On Tuesday, November 12, 2019, 4:46:51 PM GMT+1, Paul Barker <[email protected]> wrote:  
Quoted 8 lines · On Tue, 12 Nov 2019, at 15:33, [email protected] wrote:

Hi all,

I would like to build my yocto project, but only my applications. I mean, I would like to separate my Linux build and the application build. I want to just have my meta-layer which contains my application being build by calling the bitbake command.
Can anyone give me a pointer? Using the multiconfig is the way to do it?

Quoted 5 lines

Best
Em

P.S. If I want to be more specific, I just want to use Yocto as a cross-compilation tool for baremetal applications.

You could start by looking at how meta-freertos (https://github.com/aehs29/meta-freertos) achieves this. It has support for running the resulting bare-metal app under qemu which you might not need, but the rest of freertos-image.bbclass is probably a good reference.

Signature · 1 line
Paul Barker
#4 lore raw
Quoted 1 line · On 12/11/2019 16:17, [email protected] wrote:

My question now is, how can I avoid hassle of building the x86_64-linux? I just need my test.elf file.

Have a look in that folder to see what it is building. That directory is for native tools, like GCC.

Ross

#5 lore raw

Hi Ross,
so you mean there is no way not to build them? I don't need any native tool.I define my cross-compilation toolchain in my layer. I asked you in twitter, you said "Use multiconfig to split the Linux and  rtos entirely". I could not figure it, so I decided not to bother you in twitter and ask it here :) Em

    On Tuesday, November 12, 2019, 5:24:10 PM GMT+1, Ross Burton <[email protected]> wrote:  
Quoted 2 lines · On 12/11/2019 16:17, [email protected] wrote:

My question now is, how can I avoid hassle of building the x86_64-linux? I just need my test.elf file.

Have a look in that folder to see what it is building.  That directory is for native tools, like GCC.

Ross

#6 lore raw
Quoted 3 lines · On 12/11/2019 16:52, [email protected] wrote:

so you mean there is no way not to build them? I don't need any native tool.
I define my cross-compilation toolchain in my layer.
I asked you in twitter, you said "Use multiconfig to split the Linux and  rtos entirely". I could not figure it, so I decided not to bother you in twitter and ask it here :)

Have a look and you'll see what it is building. If you can remove those dependencies from your build then it won't build them...

I suspect you can't. Your cross compiler will be built in the x86-64_linux folder for a start.

Ross

#7 lore raw
In reply to [email protected]
Quoted 10 lines · On 12/11/2019 15:33, [email protected] wrote:

Hi all,

I would like to build my yocto project, but only my applications. I mean, I would like to separate my Linux build and the application build. I want to just have my meta-layer which contains my application being build by calling the bitbake command.
Can anyone give me a pointer? Using the multiconfig is the way to do it?

Best
Em

P.S. If I want to be more specific, I just want to use Yocto as a cross-compilation tool for baremetal applications.

Baremetal != "just my app and not Linux".

If you want to build a bare metal application then setup the distribution as such: meta-freertos is one example using FreeRTOS, and we have newlib or baremetal options for the toolchain. Using Linux and glibc is just the default and not hardcoded.

Ross