Skip to contentSkip to conversation

usb mouse in 2.2.10

DISCUSSION Robert Brose 3 participants 4 messages Jul 27, 1999 – Jul 28, 1999

lore
Share & tools
lore
#0 lore raw

Thanks for those that helped with the usb keyboard and 2.2.10. Now that the keyboard is working
on the iMac, I've got one observation and a question.

1) The keyboard response is somewhat odd. If I type "cd /anything" at the prompt, it fairly
regularly does cdcd /anything on the echo. It's hard to pin down because it isn't
completely consistent. I'm guessing an odd debounce problem.. It seems to only happen on
a few characters. The same machine works fine with 2.2.5.

2) The mouse is inoperative in X. The links are... [bob@imac /dev]$ ls -l *mouse*

crw-r--r--   1 root     root      10,  10 Apr 30 10:54 adbmouse
lrwxrwxrwx   1 root     root            8 Jun 16 12:08 mouse -> usbmouse
crw-rw-r--   1 root     root      10,   6 May  5  1998 sunmouse
lrwxrwxrwx   1 root     root           11 Jun 16 11:45 usbmouse -> hidbp-mse-0

The X pointer section..
Section "Pointer"
Protocol "BusMouse"
Device "/dev/mouse"

If I cat /dev/mouse and move it I get moving lines of junk as I would expect. The bus mouse
protocol looks suspicious but it works in 2.2.5 and I haven't found anything to replace it with
yet.

Bob

Signature · 8 lines
Robert E. Brose II    N0QBJ
http://www.jriver.com/~bob/
[email protected]

[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]
#2 lore raw
In reply to Robert Brose
Quoted 3 lines · Robert Brose

1) The keyboard response is somewhat odd. If I type "cd /anything" at the prompt, it fairly
regularly does cdcd /anything on the echo. It's hard to pin down because it

This is a problem in the USB keyboard driver, where it doesn't handle the `key rollover error' keycode correctly. The iMac keyboard gives this keycode if you press more than 2 keys (other than modifiers) at once.

Quoted 5 lines

If I cat /dev/mouse and move it I get moving lines of junk as I would expect. The bus mouse
protocol looks suspicious but it works in 2.2.5 and I haven't found anything to replace it with
yet.

Use "IMPS/2" (or "imps2" for gpm).

Paul.

[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]

#3 lore raw

User Paul Mackerras says:

Quoted 10 lines
Quoted 3 lines · Robert Brose

1) The keyboard response is somewhat odd. If I type "cd /anything" at the prompt, it fairly
regularly does cdcd /anything on the echo. It's hard to pin down because it

This is a problem in the USB keyboard driver, where it doesn't handle the `key rollover error' keycode correctly. The iMac keyboard gives this keycode if you press more than 2 keys (other than modifiers) at once.

Aha, I am definitely a N-Key rollover person!

Quoted 7 lines
Quoted 5 lines

If I cat /dev/mouse and move it I get moving lines of junk as I would expect. The bus mouse
protocol looks suspicious but it works in 2.2.5 and I haven't found anything to replace it with
yet.

Use "IMPS/2" (or "imps2" for gpm).

Works well but if I pick up a window and move it around quickly a lot I can make the mouse cursor go bye-bye.

Bob

Signature · 10 lines
|   Robert E. Brose II         (N0QBJ)          | J. River, Inc.         |
|      WWW:   http://www.jriver.com/~bob/       | 125 North First Street |
|      EMAIL: mailto:[email protected]             | Minneapolis, MN 55401  |
|                                               | 612-339-2521 x212      |


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]