Cleanup thought.
Quoted 6 lines · In message <[email protected]> Dan Malek wrote:
Quoted 3 lines
Yes, I have. It's pretty short, and pretty much useless on anything else but an MBX board.
Excuse me? That is used for every board in my office and certainly all of them selectable from the configuration script.
Sorry. Re-reading what I posted this sounds a lot more negative than I intended. I definitely don't want to blindy criticize one of those who contributed so much to what I'm using now.
Quoted 4 lines
I particularly like to take advantage of all of the work done by others in the "workstation" group. To do this you have to fit with what they do, not go in a different direction that makes it difficult to track.
Me too.
And needless to say, I'm taking a lot of advantage of what you did and are doing.
I posted the fadrom code for this purpose, but everyone still
Oops! I must have missed this (I even can't find it here in my archives). Can you please re-post a pointer? TIA!
Quoted 4 lines
wants to invent their own.....That does everything from processor and SDRAM initialization to loading ext2 file systems from an ATA Flash card. Strip out what you don't want and tack it on the front of zImage.
Where is it?!?
Quoted 1 line
Just keep talking, we'll come up with something.
Maybe I/we can do a bit more than just talking?
Quoted 3 lines
You are doing it. I'll just keep tossing stuff out there, at least as file updates on the server. When we see something better, I'll check it into CVS.
:-)
Thnx,
Wolfgang Denk
Signature · 6 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] In the beginning, there was nothing, which exploded. - Terry Pratchett, _Lords and Ladies_ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 2 lines · In message <[email protected]> I wrote:
I posted the fadrom code for this purpose, but everyone still
??? This was from Dan; don't know where the quote mark went...
Quoted 2 lines
Oops! I must have missed this (I even can't find it here in my archives). Can you please re-post a pointer? TIA!
Sorry, got it (the missing 's' killed my grep).
Don't know why I never looked into this (Maybe because I never did anything with a FADS board..)
Wolfgang Denk
Signature · 7 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] One of the advantages of being a captain is being able to ask for ad- vice without necessarily having to take it. -- Kirk, "Dagger of the Mind", stardate 2715.2 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 1 line · Wolfgang Denk
Sorry. Re-reading what I posted this sounds a lot more negative
That startup code is intended to work for every 8xx processor. All you need to do is set up the memory controller and get these bits into memory (if the controller isn't set up, you can't get them there anyway).
Then decide how you want to build the board information structure, which can be hard coded if you wish. It's all downhill from there.
Quoted 3 lines
Oops! I must have missed this (I even can't find it here in my archives). Can you please re-post a pointer? TIA!
ftp://ftp.ppc.kernel.org/pub/linuxppc/embedded/fadsrom.tgz
Quoted 1 line
Maybe I/we can do a bit more than just talking?
I have your SMC console stuff underway, what else do you want to add? Write it, test it, send it.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/