715/80 problems]
Sorry I sent this reply to Philipp while I meant to send it to the list.
Inthe mean time I saw Alex mail, so its sounds more like a regression than a new desgin orientation.
Correct me if I'm wrong.
Phi
--
mailto:[email protected]
Technical Consulting Lab
Quoted 8 lines · Philipp Rumpf
Quoted 4 lines
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinuxyou might want to try to boot via tftp / bootp as this is what most of us do and it seems to work for us.
I'm single node oriented for now, I use to setup my disc so I could have all in 1, i.e a LIF area, an HFS with the development system on it, an EXT2 area (for the future), a swap area for linux, I don't plan to boo HP-UX on this one.
With the regression that occured after 14 september 1999, or so (20 septembre is wrong, 14 setp is good), I can't use it anymore.
I'm think about a newfs to regain the full HFS capacity unless one of you can tell me this will be put back as it was before. For now I assume the vmlinux is not supposed to boot from isl> hpux right?
Phi
--
mailto:[email protected]
Technical Consulting Lab
Quoted 7 lines · [email protected] wrote:
With the regression that occured after 14 september 1999, or so (20 septembre is wrong, 14 setp is good), I can't use it anymore.
I'm think about a newfs to regain the full HFS capacity unless one of you can tell me this will be put back as it was before. For now I assume the vmlinux is not supposed to boot from isl> hpux right?
It's *supposed to* work, but it doesn't.
Ah, okay. This means that we should just be able to see what changed on Sept. 14 and figure out what to fix.
Is anyone interested in fixing this?
- Alex
Signature · 3 lines
Alex deVries Vice President of Engineering The Puffin Group
Re: [parisc-linux] 715/80 problems
Am Wed, 22 Sep 1999 schrieb Alex deVries:
Quoted 9 lines
Quoted 7 lines · [email protected] wrote:
With the regression that occured after 14 september 1999, or so (20 septembre is wrong, 14 setp is good), I can't use it anymore.
I'm think about a newfs to regain the full HFS capacity unless one of you can tell me this will be put back as it was before. For now I assume the vmlinux is not supposed to boot from isl> hpux right?
Quoted 6 lines
It's *supposed to* work, but it doesn't.
Ah, okay. This means that we should just be able to see what changed on Sept. 14 and figure out what to fix.
Is anyone interested in fixing this?
Hi Philippe,
Hi Alex.
I�m not really sure, but maybe I know why it doesn�t boot any longer. Phi, could you look in the file arch/parisc/Makefile in the section LDFLAGS=-R<yyy> if your working version has <yyy> as 0x10000 and your non-working version has 0xC0010000. If yes, then it shows that the hpux-bootloader isn�t able to load our kernel into the virtual space at 0xC0000000 and directly stops [segfaults?] without any message. One possible solution could be, to patch the contents of the vmlinux-file at offsets 0x18, (0x28??), 0x8A and 0x98 with &= 0xFFFFFFF (without C0). Please take a look in the som.h-file, which contents have to be patched ! This way the hpux-loader could load the kernel to the correct adress-room and the kernel (already) automatically sets up the virtual adress-mapping.
In our own bootloader we read the contents of this header too and use the "ADJ_LOW"-Function to get the correct adresses before loading the kernel.
Sure, maybe I�m totally wrong !
Helge Deller.
Quoted 2 lines
- Alex