SndConfig for Linux/PPC
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · Joerg Rambau
I have a Rev 2 PB G3 266 MHz (bought in Dec 98)
with Rage LT Pro, Chip ID0x4c50.MCLK 78, PLL 135 crashes (and some others I cannot remember), MCLK 60, 63, 71, PLL 135, MCLK 100, PLL DEFAULT do not crash.
I have to say that, in contrast to earlier versions of
atyfb.c, MCLK 100, PLL DEFAULT
Why try PLL 135?
AFAIK the RAGE PRO LT PLL upper limit is 230 Mhz. This means that the PLL locks best in the range 115-230 MHz. Outside this range, the PLL may not lock to the specified frequency. If you use PLL 135, atyfb will assume the PLL locks best in the range 62.5-135 MHz, which may cause screen unstabilities.
Greetings,
Geert
--
Geert Uytterhoeven ----------------- Sony Suprastructure Center Europe (SUPC-E) [email protected] ------------------- Sint Stevens Woluwestraat 55 Phone +32-2-7248648 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/