Skip to contentSkip to conversation

controlfb working at 1024x768@60 Hz

DISCUSSION David Riley 3 participants 3 messages Oct 6, 1999

lore
Share & tools
lore
#0 lore raw

After several inquiries without answer, I decided to find out for myself why controlfb always reverted to vmode 17 when I set it to 14 (even with fbset). Apparently, whenever the geometry is set to 1024x768, the refresh rate is automatically set to 75 Hz. I set the default value to 60 Hz instead, and now it works fine with my monitor (which doesn't do 75 Hz). If anyone has a similar problem, there's your fix. However, controlfb still doesn't do kernel args (for what reason I can't fathom), and having a default value for every resolution is not the right way to go. I, however, have no idea how to implement a more permanent solution (i.e., it actually goes to vmode 14 when you set it there, and vmode 17 when you set it there).

Anyway, I'd include a patch for this if I knew how to use diff, but I suppose you'll just have to find the spot yourself if you need to fix it.

Hope this helped,
David

Signature · 4 lines
--"Your mouse has been moved.  Windows 95 must be restarted for change
to take effect."

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
#1 lore raw
Quoted 2 lines · David Riley

Anyway, I'd include a patch for this if I knew how to use diff, but I suppose you'll just have to find the spot yourself if you need to fix it.

diff -u oldfile newfile

--
Geert Uytterhoeven ----------------- Sony Suprastructure Center Europe (SUPC-E) [email protected] ------------------- Sint Stevens Woluwestraat 55 Phone +32-2-7248632 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#2 lore raw

OpenFirm ware

I hope this is the right list to post to about this, please correct me if I'm wrong.
I recently got a 3Dfx Voodoo3 card, which works fine for linux, but I'd like to be able to boot from OF instead of bootx. I know that I have to point the display to /bandit/3Dfx,Voodoo3 but this only gives me a res of 640x480 and vmode doesn't allow me to change it (if I boot from bootx I can get my typical 1280x1024). I'm wondering if there are options to pass or set in OF that will allow me to change the resolution.
the machine is an PM8600
thanks in advance

L
--
gpg key/info http://usw-dsl125.pond.net/~louisk/gpgsig.html
gpg fingerprint 6D82 323C D0B2 B568 FD37 9F50 91B0 3547 EBBC B27E

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/