MPC8xx updates to 2.2.13
I just put a tar image of 2.2.13 with the 8xx updates on ppc.kernel.org. I needed it for a couple of real applications....
It has a few things in it that I have yet to check into the 2.3.xx baseline. In particular there are a couple of 10/100 Ethernet PHYs I want to ensure work properly. There are also CPM port configurations I want to complete.
I tested it on the MBX, BrightStar Engineering BSE-IP, and the Embedded Planet RPX-CLLF. If you are using the CLLF, there is some additional information about booting over the 10/100 Ethernet on the FEC that may be helpful. Ask and I will post that in a separate message so it doesn't get lost here.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hey Dan,
We just got done getting the 2.2.13 running on the RPX-lite. We had to add CONFIG_ENET_SCC2 to its config to make it work. Thanks for the update!
BTW: have you compiled any of these with CONFIG_MODULES turned on? We've tried with a couple of different kernels and generally get syntax errors from ppc_ksyms.c and, after fixing those, we get a bunch of unresolved symbols from kernel.o . We didn't dig very deep on this, we were just curious if it would work...apparently not. ;-)
I'm wondering if anyone else has played with this?
Oh well, we'll just go back to a static kernel and work from there, no big deal.
Thanks Again,
-Mark
Quoted 17 lines · Dan Malek
I just put a tar image of 2.2.13 with the 8xx updates on ppc.kernel.org. I needed it for a couple of real applications....
It has a few things in it that I have yet to check into the 2.3.xx baseline. In particular there are a couple of 10/100 Ethernet PHYs I want to ensure work properly. There are also CPM port configurations I want to complete.
I tested it on the MBX, BrightStar Engineering BSE-IP, and the Embedded Planet RPX-CLLF. If you are using the CLLF, there is some additional information about booting over the 10/100 Ethernet on the FEC that may be helpful. Ask and I will post that in a separate message so it doesn't get lost here.
Quoted 2 lines
-- Dan
Mark S. Mathews
AbsoluteValue Software Web: http://www.absoval.com P.O. Box 941149 e-mail: [email protected] Maitland, FL 32794-1149 Phone: 407.644.8582 USA Fax: 407.539.1294
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 6 lines · Mark S. Mathews
Hey Dan,
We just got done getting the 2.2.13 running on the RPX-lite. We had to add
CONFIG_ENET_SCC2to its config to make it work. Thanks for the update!
You are welcome....but didn't 'make config' ask you which SCC to use for the Ethernet? You really shouldn't edit .config by hand, as there are other files updated during the 'make config' procedure.
Quoted 1 line
BTW: have you compiled any of these with
CONFIG_MODULESturned on?
Yes, and......
We've
Quoted 1 line
tried with a couple of different kernels and generally get syntax errors
...I know. I just haven't kept this up to date as I don't use it all of the time. I guess I will from now on.....
Quoted 2 lines
Oh well, we'll just go back to a static kernel and work from there, no big deal.
Which is usually what I use in an embedded environment as it requires less file system space and structure. That is why I don't get around to keeping the modules up to date as often as I should.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 4 lines · Dan Malek
Quoted 3 lines · Mark S. Mathews
Hey Dan,
Quoted 8 lines
Quoted 3 lines
We just got done getting the 2.2.13 running on the RPX-lite. We had to add
CONFIG_ENET_SCC2to its config to make it work. Thanks for the update!You are welcome....but didn't 'make config' ask you which SCC to use for the Ethernet? You really shouldn't edit .config by hand, as there are other files updated during the 'make config' procedure.
You are so right. When we config'd it originally, we used the defaults from your existing config. If you select SCC1, then it (rightly) doesn't ask you about SCC2. Our bad.
Thanks for the note.
-Mark
Mark S. Mathews
AbsoluteValue Software Web: http://www.absoval.com P.O. Box 941149 e-mail: [email protected] Maitland, FL 32794-1149 Phone: 407.644.8582 USA Fax: 407.539.1294
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/