Macally 2-button mouse support
PATCH 1/1 Macally 2-button mouse support
This patch adds support for that mouse. The code is tested only by me. I didn't get any infos from Macally (GRRR!) so I don't know if the values I use to identify the mouse are the same for all M2BM mouses on the market.
Bye.
macintosh/mac_keyb.c renamed from macintosh/mac_keyb.old +26 -0
@@ -272,6 +272,7 @@#define ADBMOUSE_MICROSPEED 6/* Microspeed mouse (&trackball ?), MacPoint */ #define ADBMOUSE_TRACKBALLPRO 7/* Trackball Pro (special buttons) */ #define ADBMOUSE_MS_A3 8/* Mouse systems A3 trackball (handler 3) */ +#define ADBMOUSE_MACALLY2 9/* MacAlly 2-button mouse */ static int adb_mouse_kinds[16 ];
@@ -490,6 +491,18 @@data[3] = byyy bxxx Third button and fourth button. Y is additional high bits of y-axis motion. XY is additional high bits of x-axis motion. + +MacAlly 2-button mouse protocol. + +For MacAlly 2-button mouse protocol the data array will contain the +following values: + +BITS COMMENTS +data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. +data[1] = bxxx xxxx Left button and x-axis motion. +data[2] = byyy yyyy Right button and y-axis motion. +data[3] = ???? ???? unknown +data[4] = ???? ???? unknown */ struct kbd_struct *kbd;
@@ -521,6 +534,11 @@ data[2 ] = (data[2 ] &0x7f ) | ((data[3 ] &0x02 ) <<6 ); data[3 ] = ((data[3 ] &0x04 ) <<5 );break ; +case ADBMOUSE_MACALLY2 : + data[3 ] = (data[2 ] &0x80 ) ?0x80 :0x00 ; + data[2 ] |=0x80 ;/* 2nd button is mapped as button 3 */ + nb=4 ; +break ; }if (adb_mouse_interrupt_hook)
@@ -825,6 +843,14 @@ (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) && (req.reply[3] == 0x4c) && (req.reply[4] == 0x31))init_turbomouse (id); + else if ((req.reply_len == 9) && + (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) && + (req.reply[3] == 0x49) && (req.reply[4] == 0x54)){ +if (adb_try_handler_change (id,0x42 )) { +printk ("\nADB MacAlly 2-button mouse at %d, handler set to 0x42" , id); + adb_mouse_kinds[id] =ADBMOUSE_MACALLY2 ; + } + } }printk ("\n" ); }