Skip to contentSkip to conversation

loadb problem

U-Boot-Users Hurricane555 2 participants 3 messages Apr 11, 2006

lore
Share & tools
lore
#0 lore raw

Yesterday I wanted to load a binary over serial port but I can?t. The console is running and I can make input over serial and output is running too.

What could be wrong?

I tried to load binary with TeraTerm and Hyperterminal!? I chose Kermitprotocol!
--
View this message in context: http://www.nabble.com/loadb-problem-t1429882.html#a3856501
Sent from the Uboot - Users forum at Nabble.com.

#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

Yesterday I wanted to load a binary over serial port but I can=C2=B4t. The = console
is running and I can make input over serial and output is running too.

And what exactly is the problem? Are there any error messages or what? What was the exact commands you entered, and what output did you get?

Quoted 2 lines

I tried to load binary with TeraTerm and Hyperterminal!? I chose Kermitprotocol!

Try using kermit instead...

Best regards,

Wolfgang Denk

Signature · 7 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The manager will be continually amazed that policies he took for com-
mon knowledge are totally unknown by some member of his  team.  Since
his fundamental job is to keep everybody going in the same direction,
his chief daily task will be communication, not decision-making.
                              - Fred Brooks, "The Mythical Man Month"