Skip to contentSkip to conversation

Question concerning memory initialization (4M->64M)

DISCUSSION Jeff Harrell 2 participants 2 messages Feb 9, 2000 – Feb 10, 2000 MIPS

lore
Share & tools
lore
#0 lore raw

I have run into an interesting problem and would like to run it past this newsgroup
to see if anyone has any experience in these areas. I am running kernel 2.3.22 and
have upgraded my memory space from ~4M (0x400000) to ~64M (0x4000000). I run the 4M
version of the kernel and have no problems but when I run the 64M version, I run
into problems during the mem_init() portion of the code. Specifically during the
free_page(tmp) call during the determination of totalram, codepages and datapages.
It looks like it is failing during the call to remove_mem_queue() within free_pages_ok().
I am seeing the next->prev and prev->next set to 0 causing a page
fault. Is there
anything that anyone is aware of that I would need to change (beyond mips_memory_upper)
that would enable me to increase available memory to 64M. Any insights would be greatly appreciated.

Thanks
Jeff

Additional information:
------------------

high memory: 0x83fff000 start memory: 0x80433000

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Harrell Work: (801) 619-6104
Broadband Access group/TI
[email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

#1 lore raw
Quoted 10 lines · Jeff Harrell

I have run into an interesting problem and would like to run it past this newsgroup to see if anyone has any experience in these areas. I am running kernel 2.3.22 and have upgraded my memory space from ~4M (0x400000) to ~64M (0x4000000). I run the 4M version of the kernel and have no problems but when I run the 64M version, I run into problems during the mem_init() portion of the code. Specifically during the free_page(tmp) call during the determination of totalram, codepages and datapages. It looks like it is failing during the call to remove_mem_queue() within free_pages_ok(). I am seeing the next->prev and prev->next set to 0 causing a page fault.

The free pages are being stored in a circular list, so struct page of a free page should never have prev or next set to zero. Smells like memory corruption.

Quoted 3 lines

Is there anything that anyone is aware of that I would need to change (beyond mips_memory_upper) that would enable me to increase available memory to 64M. Any insights would be greatly appreciated.

That alone should be sufficient.

Quoted 4 lines

Additional information:
------------------

high memory: 0x83fff000 start memory: 0x80433000

I assume these are the values of start_mem and mem_end as passed to mem_init()? In that case these values look sane.

Ralf