no success
Hi all!
I've put the MTD drivers into the kernel, and I'm booting linux from the ZIP drive. Once it boots, I try to access the nftl* devices with fdisk, but I've got always the same error about:
could not open /dev/nftl*
What am I doing wrong?
I'm using the 1.23 version of nftl.c, as David said this was the last one which worked, but with the current CVS version of this file the results are the same.
Cheers
To unsubscribe, send "unsubscribe mtd" to [email protected]
Quoted 7 lines · Dvir Oren
Rodrigo Moya writes ("no success"):
Quoted 1 line
could not open
/dev/nftl*Does
/dev/nftl? have the correct major number (93)?
yes, all the nftla* devices have 93 as major number. Another thing, is that the kernel displays no messages about the MTD drivers. Should it show something?
To unsubscribe, send "unsubscribe mtd" to [email protected]
Quoted 3 lines · Rodrigo Moya
yes, all the nftla* devices have 93 as major number. Another thing, is that the kernel displays no messages about the MTD drivers. Should it show something?
It should. Are you sure you patched the init routines in properly? The patch in the CVS patches (?) directory ought to work. Anyway, I'm supposed to be on holiday. Trevor?
--
dwmw2
To unsubscribe, send "unsubscribe mtd" to [email protected]
Quoted 7 lines · David Woodhouse
Quoted 3 lines · Rodrigo Moya
yes, all the nftla* devices have 93 as major number. Another thing, is that the kernel displays no messages about the MTD drivers. Should it show something?
Quoted 6 lines
It should. Are you sure you patched the init routines in properly? The patch in the CVS patches (?) directory ought to work. Anyway, I'm supposed to be on holiday. Trevor?
--
dwmw2
Hi,
Apologies but I've been away for 10 days or so.
It sounds to me as if the init routines have not been set-up correctly as Dave suggested.
linux/init/main.c - do_basic_setup() calls init_mtd() mtd.c - init_mtd() calls the rest of the configured init routines.
I can't remember if there's much screen output to see, there should be something. If in doubt, try enabling the DBG output, (recompile with -DZDBG).
Hope this helps, if not get back to me with some more details
Cheers
Trev.
Signature · 9 lines
Zentropix Inc - a Lineo company Tel: +44 (0)1273 234 647 Fax: +44 (0)1273 704 482 Visit http://www.zentropix.com/ for Real Time Linux Tools Visit http://www.realtimelinux.org/ for Real Time Linux Information To unsubscribe, send "unsubscribe mtd" to [email protected]
Quoted 7 lines
Hi,
Apologies but I've been away for 10 days or so.
It sounds to me as if the init routines have not been set-up correctly as Dave suggested.
Quoted 9 lines
linux/init/main.c-do_basic_setup()callsinit_mtd()mtd.c-init_mtd()calls the rest of the configured init routines.I can't remember if there's much screen output to see, there should be something. If in doubt, try enabling the DBG output, (recompile with -DZDBG).
Hope this helps, if not get back to me with some more details
It was my fault, I had applied the patch, but in a different directory, and my makefile wasn't copying the patched init/main.c file. Sorry.
But now, I'm compiling with this fixed, and I get undefined references to register_mtd_notifier and unregister_mtd_notifier, which are not in the source tree I've got here. I've even dropped today the directory and checked out from CVS a fresh copy.
And these two functions are neither in the linux source tree.
Thanks for your help!
To unsubscribe, send "unsubscribe mtd" to [email protected]