layer.conf on openembedded-core ?

DISCUSSION Riko 4 participants 11 messages Aug 14, 2017 – Aug 16, 2017

lore

Share & tools

lore

Riko

author

2017-08-14 07:11 UTC #0 lore raw

Dear Yocto Members,

How can I find this file ?

ERROR: Unable to parse /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file /home/bianchi/poky/openembedded-core/conf/layer.conf not found

Thanks,

Riko

Leonardo Sandoval

2017-08-14 15:40 UTC #1 lore raw

Quoted 3 lines · Riko

Dear Yocto Members,
How can I find this file ?

this is a pretty general question. are you running bitbake from the build directory? double check your conf/bblayers.conf and make sure paths there are pointing correctly.

Quoted 12 lines

==
ERROR: Unable to parse /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file /home/bianchi/poky/openembedded-core/conf/layer.conf not found
Thanks,
Riko

Christopher Larson

2017-08-14 15:57 UTC #2 lore raw

The openembedded-core root isn’t a layer, openembedded-core/meta is.

Quoted 31 lines · Leonardo Sandoval

Quoted 3 lines · Riko
Dear Yocto Members,
How can I find this file ?
this is a pretty general question. are you running bitbake from the build directory? double check your conf/bblayers.conf and make sure paths there are pointing correctly.
Quoted 12 lines
==
ERROR: Unable to parse /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file /home/bianchi/poky/openembedded-core/conf/layer.conf not found
Thanks,
Riko
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 4 lines

Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics

Riko

author

2017-08-15 00:55 UTC #3 lore raw

Thanks for the clue, now it's compiling,

Quoted 44 lines · Christopher Larson

The openembedded-core root isn’t a layer, openembedded-core/meta is.

On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected] <mailto:[email protected]>> wrote:

    On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
    > Dear Yocto Members,
    >
    > How can I find this file ?


    this is a pretty general question. are you running bitbake from the
    build directory? double check your conf/bblayers.conf and make sure
    paths there are pointing correctly.


    >
    > ==
    >
    > ERROR: Unable to parse
    > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file
    > /home/bianchi/poky/openembedded-core/conf/layer.conf not found
    >
    >
    > Thanks,
    >
    > Riko
    >


    --
    _______________________________________________
    yocto mailing list
    [email protected] <mailto:[email protected]>
    https://lists.yoctoproject.org/listinfo/yocto
    <https://lists.yoctoproject.org/listinfo/yocto>

Signature · 4 lines

Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics

Riko

author

2017-08-15 01:09 UTC #4 lore raw

In reply to Christopher Larson

Dear Team Yocto Members,

I continue compiling, and got :

ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
ERROR: Failed to parse recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb

How can I fix it ?

regards,

Riko

Quoted 44 lines · Christopher Larson

The openembedded-core root isn’t a layer, openembedded-core/meta is.

On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected] <mailto:[email protected]>> wrote:

    On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
    > Dear Yocto Members,
    >
    > How can I find this file ?


    this is a pretty general question. are you running bitbake from the
    build directory? double check your conf/bblayers.conf and make sure
    paths there are pointing correctly.


    >
    > ==
    >
    > ERROR: Unable to parse
    > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file
    > /home/bianchi/poky/openembedded-core/conf/layer.conf not found
    >
    >
    > Thanks,
    >
    > Riko
    >


    --
    _______________________________________________
    yocto mailing list
    [email protected] <mailto:[email protected]>
    https://lists.yoctoproject.org/listinfo/yocto
    <https://lists.yoctoproject.org/listinfo/yocto>

Signature · 4 lines

Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics

Leonardo Sandoval

2017-08-15 14:04 UTC #5 lore raw

Quoted 8 lines · Riko

Dear Team Yocto Members,
I continue compiling, and got :
ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
ERROR: Failed to parse
recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb

would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?)

Quoted 59 lines

How can I fix it ?

regards,

Riko

Quoted 48 lines · Christopher Larson

The openembedded-core root isn’t a layer, openembedded-core/meta is.

On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected]> wrote:

        On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
        > Dear Yocto Members,
        >
        > How can I find this file ?
        
        
        this is a pretty general question. are you running bitbake
        from the
        build directory? double check your conf/bblayers.conf and
        make sure
        paths there are pointing correctly.
        
        
        >
        > ==
        >
        > ERROR: Unable to parse
        > /home/bianchi/poky/openembedded-core/conf/layer.conf:
        [Errno 2] file
        > /home/bianchi/poky/openembedded-core/conf/layer.conf not
        found
        >
        >
        > Thanks,
        >
        > Riko
        >
        
        
        --
        _______________________________________________
        yocto mailing list
        [email protected]
        https://lists.yoctoproject.org/listinfo/yocto

Signature · 4 lines

Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics

Martin Jansa

2017-08-15 14:11 UTC #6 lore raw

But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch.

That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers).

Quoted 87 lines · Leonardo Sandoval

Quoted 5 lines · Riko
Dear Team Yocto Members,
I continue compiling, and got :
ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
Quoted 2 lines
ERROR: Failed to parse
recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb
Quoted 1 line
would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?)
Quoted 59 lines
How can I fix it ?
regards,
Riko
Quoted 48 lines · Christopher Larson
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected]> wrote:
        On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
        > Dear Yocto Members,
        >
        > How can I find this file ?


        this is a pretty general question. are you running bitbake
        from the
        build directory? double check your conf/bblayers.conf and
        make sure
        paths there are pointing correctly.


        >
        > ==
        >
        > ERROR: Unable to parse
        > /home/bianchi/poky/openembedded-core/conf/layer.conf:
        [Errno 2] file
        > /home/bianchi/poky/openembedded-core/conf/layer.conf not
        found
        >
        >
        > Thanks,
        >
        > Riko
        >


        --
        _______________________________________________
        yocto mailing list
        [email protected]
        https://lists.yoctoproject.org/listinfo/yocto
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Riko Ho

author

2017-08-15 23:40 UTC #7 lore raw

I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers.

Regards,

Quoted 100 lines · Martin Jansa

But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch.
That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers).
Quoted 87 lines · Leonardo Sandoval
Quoted 5 lines · Riko
Dear Team Yocto Members,
I continue compiling, and got :
ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
Quoted 2 lines
ERROR: Failed to parse
recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb
Quoted 1 line
would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?)
Quoted 59 lines
How can I fix it ?
regards,
Riko
Quoted 48 lines · Christopher Larson
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected]> wrote:
        On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
        > Dear Yocto Members,
        >
        > How can I find this file ?


        this is a pretty general question. are you running bitbake
        from the
        build directory? double check your conf/bblayers.conf and
        make sure
        paths there are pointing correctly.


        >
        > ==
        >
        > ERROR: Unable to parse
        > /home/bianchi/poky/openembedded-core/conf/layer.conf:
        [Errno 2] file
        > /home/bianchi/poky/openembedded-core/conf/layer.conf not
        found
        >
        >
        > Thanks,
        >
        > Riko
        >


        --
        _______________________________________________
        yocto mailing list
        [email protected]
        https://lists.yoctoproject.org/listinfo/yocto
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Martin Jansa

2017-08-15 23:48 UTC #8 lore raw

Quoted 3 lines · Riko Ho

I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers.

This might help you:
https://git-scm.com/documentation

Quoted 102 lines · Martin Jansa

Quoted 101 lines
But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch.
That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers).
Quoted 87 lines · Leonardo Sandoval
Quoted 5 lines · Riko
Dear Team Yocto Members,
I continue compiling, and got :
ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
Quoted 2 lines
ERROR: Failed to parse
recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb
Quoted 1 line
would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?)
Quoted 59 lines
How can I fix it ?
regards,
Riko
Quoted 48 lines · Christopher Larson
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected]> wrote:
        On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
        > Dear Yocto Members,
        >
        > How can I find this file ?


        this is a pretty general question. are you running bitbake
        from the
        build directory? double check your conf/bblayers.conf and
        make sure
        paths there are pointing correctly.


        >
        > ==
        >
        > ERROR: Unable to parse
        > /home/bianchi/poky/openembedded-core/conf/layer.conf:
        [Errno 2] file
        > /home/bianchi/poky/openembedded-core/conf/layer.conf not
        found
        >
        >
        > Thanks,
        >
        > Riko
        >


        --
        _______________________________________________
        yocto mailing list
        [email protected]
        https://lists.yoctoproject.org/listinfo/yocto
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 1 line

Martin 'JaMa' Jansa     jabber: [email protected]

Riko

author

2017-08-16 01:06 UTC #9 lore raw

This one :

|git clone -b morty git://any layers ===> if I use morty as my branch ? correct me ? thanks |

Quoted 104 lines · Martin Jansa

Quoted 3 lines · Riko Ho
I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers.
This might help you:
https://git-scm.com/documentation
Quoted 97 lines · Martin Jansa
Quoted 96 lines
But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch.
That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers).
Quoted 83 lines · Leonardo Sandoval
Quoted 5 lines · Riko
Dear Team Yocto Members,
I continue compiling, and got :
ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
Quoted 2 lines
ERROR: Failed to parse
recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb
would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?)
Quoted 58 lines
How can I fix it ?
regards,
Riko
Quoted 48 lines · Christopher Larson
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected]> wrote:
         On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
         > Dear Yocto Members,
         >
         > How can I find this file ?


         this is a pretty general question. are you running bitbake
         from the
         build directory? double check your conf/bblayers.conf and
         make sure
         paths there are pointing correctly.


         >
         > ==
         >
         > ERROR: Unable to parse
         > /home/bianchi/poky/openembedded-core/conf/layer.conf:
         [Errno 2] file
         > /home/bianchi/poky/openembedded-core/conf/layer.conf not
         found
         >
         >
         > Thanks,
         >
         > Riko
         >


         --
         _______________________________________________
         yocto mailing list
         [email protected]
         https://lists.yoctoproject.org/listinfo/yocto
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Riko

author

2017-08-16 01:38 UTC #10 lore raw

In reply to Martin Jansa

so from this page

https://layers.openembedded.org/layerindex/branch/pyro/layers/

for example I want to use 'pyro' branch :

I will do

#> git clone -b pyro git://git.openembedded.org/openembedded-core

Quoted 104 lines · Martin Jansa

Quoted 3 lines · Riko Ho
I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers.
This might help you:
https://git-scm.com/documentation
Quoted 97 lines · Martin Jansa
Quoted 96 lines
But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch.
That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers).
Quoted 83 lines · Leonardo Sandoval
Quoted 5 lines · Riko
Dear Team Yocto Members,
I continue compiling, and got :
ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class
Quoted 2 lines
ERROR: Failed to parse
recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/
build-appliance-image_15.0.0.bb
would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?)
Quoted 58 lines
How can I fix it ?
regards,
Riko
Quoted 48 lines · Christopher Larson
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <[email protected]> wrote:
         On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
         > Dear Yocto Members,
         >
         > How can I find this file ?


         this is a pretty general question. are you running bitbake
         from the
         build directory? double check your conf/bblayers.conf and
         make sure
         paths there are pointing correctly.


         >
         > ==
         >
         > ERROR: Unable to parse
         > /home/bianchi/poky/openembedded-core/conf/layer.conf:
         [Errno 2] file
         > /home/bianchi/poky/openembedded-core/conf/layer.conf not
         found
         >
         >
         > Thanks,
         >
         > Riko
         >


         --
         _______________________________________________
         yocto mailing list
         [email protected]
         https://lists.yoctoproject.org/listinfo/yocto
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto