SATA: Marvell 88SE6141 kernel support?
I talked to Gord Peters who asked about this sata chip in June. He said there is a experimental patch for it, but the one he had was an old version. I've been looking all over but could not find it. Also I've checked the newest linux kernel builds and there is no mention of mv_61x support. Does anyone know the status of kernel support for this chip? I'm running 2.6.17 kernel currently but will be upgrading to .18 on Thursday (FC5)
I'm using the Asus P5WD2-E motherboard. I've already used the 4 sata ports on the ICH7 chip and I'm looking to expand my software raid 5 array with a couple more drives (and more later). For reference, this was the earlier thread from archives:
http://lkml.org/lkml/2006/6/14/259
Thank you for your time,
Gene
Quoted 5 lines · [email protected] wrote:
I talked to Gord Peters who asked about this sata chip in June. He said there is a experimental patch for it, but the one he had was an old version. I've been looking all over but could not find it. Also I've checked the newest linux kernel builds and there is no mention of
mv_61xsupport. Does anyone know the status of kernel support for this chip? I'm running 2.6.17 kernel currently but will be upgrading to .18 on Thursday (FC5)I'm using the Asus P5WD2-E motherboard. I've already used the 4 sata ports on the ICH7 chip and I'm looking to expand my software raid 5 array with a couple more drives (and more later). For reference, this was the earlier thread from archives:
http://lkml.org/lkml/2006/6/14/259
This chip is vastly different from sata_mv.
For the SATA portion (not PATA), you might have some luck adding your PCI ID to ahci.c. Give that a try, and let us know if it works or explodes :)
Other than that, no progress at all to report. Marvell just provided the documentation to me, but I've made no progress yet.
Jeff
We just got docs for it. I've got an "it compiles" legacy mode driver for the chip if you want to try it out.
Alan