using ISA interrupts on MBX821
Hi,
I want to get a driver for a PC ISA card running on the MBX board under linux.
I am using Motorola's adapter board to interface the ISA card on the MBX board. The driver is working fine
on x86 platforms. I can also communicate to the io registers on the ISA card.
But ... I cannot get interrupts working. The ISA card uses irq 13 (others are possible), since this is free on the MBX.
What do I have to pass to the request_irq call as interrupt number ? Is 13 ok ?
Do I have to think about any other differences concerning the PPC platform ?
Some infos: Linux kernel 2.2.13 from Monta-Vista, no PCI support present in kernel because of the known bug in the QSPAN.
Can anybody give me some advice ? Do I have to think about something special on my platform ?
Matthias
--
-------------------------------------------------
\ Matthias Fuchs \
\ esd electronic system design Gmbh \
\ Vahrenwalder Straße 205 \
\ D-30165 Hannover \
\ email: [email protected] \
\ phone: +49-511-37298-0 \
\ fax: +49-511-37298-68 \
--------------------------------------------------** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/