Skip to contentSkip to conversation

PReP kernel making

DISCUSSION Gianluca Costa 2 participants 2 messages Jul 3, 2000 – Jul 4, 2000

lore
Share & tools
lore
#0 lore raw

Hi,

I am trying to compile the 2.2.15 kernel sources (Debian potato for the ppc) for MCPN750 borad but
I am not able to understand why my zImage don't run. The output from PPCBUG is:
...
PPC1-Bug>nbo

Network Booting from: DEC21143, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,19@e,0:0,0
Loading: zImage

Client IP Address      = 192.168.30.189
Server IP Address      = 192.168.30.181
Gateway IP Address     = 0.0.0.0

Subnet IP Address Mask = 255.255.255.0
Boot File Name = zImage
Argument File Name =

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&1021571, Bytes Loaded =&1021571
Bytes/Second =&340523, Elapsed Time=3 Second(s)

Residual-Data Located at: $03F88000

(end)

I am using the default config that came with the kernel, but nothing changes.

What should I do to make a bootable kernel image? What kind of difference there can be between the
bootable image I found on the debian distribution and the one I'm trying to build?
Is there any patch or something other I should add to the plain sources?

Thanks in advance

Best regards,

Gianluca Costa
[email protected]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 26 lines · Gianluca Costa

Hi,

I am trying to compile the 2.2.15 kernel sources (Debian potato for the ppc) for MCPN750 borad but
I am not able to understand why my zImage don't run. The output from PPCBUG is:
...
PPC1-Bug>nbo

Network Booting from: DEC21143, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,19@e,0:0,0
Loading: zImage

Client IP Address      = 192.168.30.189
Server IP Address      = 192.168.30.181
Gateway IP Address     = 0.0.0.0

Subnet IP Address Mask = 255.255.255.0
Boot File Name = zImage
Argument File Name =

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&1021571, Bytes Loaded =&1021571
Bytes/Second =&340523, Elapsed Time=3 Second(s)

Quoted 6 lines

Residual-Data Located at: $03F88000

(end)

I am using the default config that came with the kernel, but nothing changes.

Well, I don't know exactly how the MPCN750 work (I've only MVME boards), but the images and the patches at ftp://vlab1.iram.es/pub/linux-2.[23] help to boot kernels on Motorola machines with Raven/Falcon or HHawk host bridges. This is as much help as I can offer right now.

Do you use a hard disk (IDE or SCSI) or attempt to mount root via NFS ?

Do you need to other boards plugged into the CompactPCI backplane ?

Regards,
Gabriel.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/