PCI DMA burst delay
Quoted 8 lines
What kind of PCI transaction is the core using to do the reads? I think that Memory Read can cause bursts to be interrupted quickly on some chipsets. If you can use Memory Read Line or Memory Read Multiple this may increase performance.
You may also need more buffering in the FPGA, otherwise you may be vulnerable to underruns if there is contention on the PCI bus. The device should be able to handle normal arbitration delays.
Yeah, that was it! I asked the programmer of the FPGA and he told me that he was using the normal Memory Read transaction. After changing that to MRM we get a much higher burst length. Now the buffer underruns really seem to be disappeared, that is great! He also told me that the fifo buffer on the FPGA could not be larger, because the size is somehow limited in the core (it's some special block ram I think...), so we are lucky that the burst length seems to fix our problem.
By the way, there is another question coming up to my mind. The pci card is to be designed for a large size copying machine (i.e. it is something like a framegrabber device which has to write out data to a printer simultaneously) which leads to really high bandwidth. For now I allocate the dma buffer in ram (a ringbuffer) using pci_alloc_consistent(), which unfortunately delimits the size to about 4 MB. However, it would be convenient to be able to allocate a larger dma buffer, because then we would be able to perform some image processing algorithms directly inside this buffer via mmapping it to user space. Is there any way to achieve this quite simple without being forced to use scatter/gather dma (our hardware is not able to do this - at least until now)?
Thank you very much for your help!
Kind regards,
Burkhard Schölpen
__________________________________________________________________________
Erweitern Sie FreeMail zu einem noch leistungsstarkeren E-Mail-Postfach! Mehr Infos unter http://freemail.web.de/home/landingpad/?mc=021131
Quoted 1 line · Burkhard Schölpen
By the way, there is another question coming up to my mind. The pci card is to be designed for a large size copying machine (i.e. it is something like a framegrabber device which has to write out data to a printer simultaneously) which leads to really high bandwidth. For now I allocate the dma buffer in ram (a ringbuffer) using
pci_alloc_consistent(), which unfortunately delimits the size to about 4 MB. However, it would be convenient to be able to allocate a larger dma buffer, because then we would be able to perform some image processing algorithms directly inside this buffer via mmapping it to user space. Is there any way to achieve this quite simple without being forced to use scatter/gather dma (our hardware is not able to do this - at least until now)?
Unfortunately if you need a memory buffer that is physically contiguous to do DMA on, your choices are basically either pci_alloc_consistent, or possibly boot-time allocation of memory by telling the kernel to use less memory than is in the machine. Trying to allocate a big chunk of contiguous memory after the system has come up will not be very reliable since memory tends to become fragmented.
When dealing with this amount of data it really would be best to use some form of scatter-gather DMA. Even if the hardware is not capable of taking multiple addresses and doing the DMA on its own, you could sort of fake it and tell it to do multiple transfers, one for each block of memory - that might have some overhead though.