Skip to contentSkip to conversation

[Install trouble]

Install trouble Famille Chauvat 3 participants 5 messages Jul 30, 2000 – Aug 8, 2000 MIPS

lore
Share & tools
lore
#0 lore raw

Hello,

I'm working with an Indy station and the corresponding kernel. On the bootp() step, i got a message:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

creating 100k of ramdisk space... done
mounting /tmp from ramdisk... failed

I can't recover from this.
<<<<<<<

Thanks a lot for your help.
Philippe

#1 lore raw
Quoted 1 line · Famille Chauvat

I'm working with an Indy station and the corresponding kernel.

There are a lot of Indy kernels out there. Could you be more specific?

Signature · 3 lines
Keith M Wesolowski			[email protected]
University of Nevada			http://www.chem.unr.edu
Chemistry Department Systems and Network Administrator
#3 lore raw
In reply to Florian Lohoff

Hi Florian,

Thanks for your response. Humm, I don't know how to boot with rw support... And, Keith M Wesolowski, see messages in this thread, modify the kernel to have a ramdisk support.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Keith M Wesolowski
I've uploaded a new kernel, dated 0731, which should have the necessary support.

That what I don't understand, except a lot of another things :-), is how it runs. You know, I took a lot of things on internet, I read a lot of papers, perhaps not those I had to, and I've never ask to support or not the ramdisk. So my question is, how the kernel I took doesn't support something I never asked for. I'm not sure to be very clear :-)

With the new kernel I have, I've a new trouble. After the partition step, a message "mount failed, bad address" appears and I 've to reboot. Of course, the next time I'ld the same things. Any suggestion, any help, would be very appreciate.
Btw, if you know someone of your team or friends who speak french, it could be better, for me, to explain what going wrong.

Philippe

#2 lore raw
In reply to Famille Chauvat
Quoted 11 lines · Famille Chauvat

Hello,

I'm working with an Indy station and the corresponding kernel. On the bootp() step, i got a message:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

creating 100k of ramdisk space... done
mounting /tmp from ramdisk... failed

I can't recover from this.
<<<<<<<

Probably this is a kernel with no ramdisk support ? Ah wait - No - You have booted the kernel with a read-only root - Which means - When mounting /tmp i tries to write /etc/mtab which is read-only - Try to append "rw" to your prom console boot line

Flo

Signature · 2 lines
Florian Lohoff		[email protected]		      	+49-5201-669912
     "If you're not having fun right now, you're wasting your time."
#4 lore raw
In reply to Famille Chauvat
Quoted 5 lines · Famille Chauvat

Hi Florian,

Thanks for your response. Humm, I don't know how to boot with rw support... And, Keith M Wesolowski, see messages in this thread, modify the kernel to have a ramdisk support.

Look into /usr/src/linux/Documentation

Booting with an "rw" root you just have to append "rw" to the command line you boot with ...

Quoted 5 lines

That what I don't understand, except a lot of another things :-), is how it runs. You know, I took a lot of things on internet, I read a lot of papers, perhaps not those I had to, and I've never ask to support or not the ramdisk. So my question is, how the kernel I took doesn't support something I never asked for. I'm not sure to be very clear :-)

Not the kernel uses it - The installer does - The installer tries to create a /tmp filesystem in a ramdisk to proceed installation. When there is no ramdisk support the /tmp filesystem creation will fail.

Quoted 4 lines

With the new kernel I have, I've a new trouble. After the partition step, a message "mount failed, bad address" appears and I 've to reboot. Of course, the next time I'ld the same things. Any suggestion, any help, would be very appreciate.

No idea

Quoted 2 lines

Btw, if you know someone of your team or friends who speak french, it could be better, for me, to explain what going wrong.

Sorry - Cant help you :)

Flo

Signature · 2 lines
Florian Lohoff		[email protected]		      	+49-5201-669912
     "If you're not having fun right now, you're wasting your time."