Skip to contentSkip to conversation

Intel Ext. 2_by_8() routines

DISCUSSION David Vrabel 1 participant 1 message Jul 31, 2000 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Hi,

I've added some *2_by_8() routines for the Intel Extended Command Set (cfi_cmdset_0001.c).
cfi_intelext_setup() decides which ones to use based on the interleave.

Also, the erase block size is set from the CFI info. I've used the info from the first erase block and assumed that they're all the same size since MTD doesn't appear to support different erase block sizes.

This stuff has been tested on an Arcom Control Systems SBC-MediaGX (a flash chip mapping for which has also been added).

Those of you with chips in x16 mode might like to check that the correct routines and are selected.

David Vrabel

To unsubscribe, send "unsubscribe mtd" to [email protected]