Skip to contentSkip to conversation

quik/kernel interaction

DISCUSSION Bill Jackson 2 participants 2 messages Aug 7, 2000 – Aug 8, 2000

lore
Share & tools
lore
#0 lore raw

i have tried to upgrade my kernel from 2.2.15 to 2.2.17(test 5 and benh) or 2.4.0. I am able to get the kernels to compile, but they won't boot. I have modified my quik.conf file and reran quik. with any of the new kernels I have made (I also made the existing 2.2.15 kernel), i get the quik boot screen and select the kernel I wish to boot and the screen goes to the "copying OF device tree....done", then says 'booting', but then it locks up. i never get the actual kernel to load....at one point, i was getting a returning from prom_init message, but I no longer get that message. I also at one point got messages "Initializing Fake screen" and "Failed to get address", followed by a "returning from prom_init" message...but the kernel never actually loads...I have /boot on /dev/sda2 and have tried everything I can think of to fix this. I have used multiple kernels as I thought the problem was kernel related (first occured when I went to 2.4.0, that didn't work, so I tried 2.2.17, that didn't work, so I got 2.2.17-benh, that
didn't work either). Since all these kernels are displaying the same
problem, I think I am doing something wrong, but I don't know what....any assistance/offers/ideas are greatly appreciated...

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#1 lore raw

Hi Bill,

On 6 Aug, this message from Bill Jackson echoed through cyberspace:

Quoted 4 lines

i have tried to upgrade my kernel from 2.2.15 to 2.2.17(test 5 and benh) or 2.4.0. I am able to get the kernels to compile, but they won't boot. I have modified my quik.conf file and reran quik. with any of the new kernels I have made (I also made the existing 2.2.15 kernel), i

Quoted 8 lines

get the quik boot screen and select the kernel I wish to boot and the screen goes to the "copying OF device tree....done", then says 'booting', but then it locks up. i never get the actual kernel to load....at one point, i was getting a returning from prom_init message, but I no longer get that message. I also at one point got messages "Initializing Fake screen" and "Failed to get address", followed by a "returning from prom_init" message...but the kernel never actually loads...

Occasionally, I had the same problem, but it was relatively random. It could happen on one kernel, I would recompile it, and the problem would be gone. Or I switched the box off for some time, retried, and now it worked...

I would rather conclude on some strange phenomenon rather than a straight bug somewhere. Possibly recent kernels, due to some code changes like differences in execution time, reveal the problem more often....

Unfortunately, I don't have a solution neither.... Note that I'm running aome old version of quik that I had to modifiy to get it to boot my G3 processor upgrade card. There was a problem with the way the BAT regs were set... No idea whether the fix Paulus sent me actually made its way into the latest quik release.

Michel

-------------------------------------------------------------------------

Michel Lanners                 |  " Read Philosophy.  Study Art.
23, Rue Paul Henkes            |    Ask Questions.  Make Mistakes.
L-1710 Luxembourg              |
email   [email protected]            |
http://www.cpu.lu/~mlan        |                     Learn Always. "

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/