why ubimkvol can't recognize /dev/ubi0?

DISCUSSION 时正 3 participants 5 messages Jan 6, 2008 – Jan 15, 2008 Memory technology devices (MTD)

Share & tools

时正

author

2008-01-06 19:25 UTC #0 lore raw

Hi all,
I wanna have a try of ubifs on nandsim, and do as what the ubifs wiki tells me
(http://osl.sed.hu/wiki/ubifs/index.php/Download_the_source).

1. compile, install and boot the new kernel(2.6.23)
the configuration option for ubi and nandsim is default turned on as module.

2. make the mtd-utils to produce ubimkvol

3. create a ubi when I got the error

# modprobe nandsim
# modprobe ubi mtd=0
# ls /dev/ubi0 -l
crw-rw---- 1 root root 253, 0 2007-12-25 01:46 /dev/ubi0
# ls /sys/class/ubi -l
drwxr-xr-x 3 root root 0 2007-12-25 01:46 ubi0
-r--r--r-- 1 root root 4096 2007-12-25 01:49 version
# ubimkvol /dev/ubi0 -n 0 -N test -s 20MiB
libubi error: readdir failed on "/sys/class/ubi"
readdir: No such file or directory
ubimkvol error: "/dev/ubi0" is not an UBI device node

it's so strange about the readdir failure, because there is the ubi0 entry in sysfs.

did I miss any step, such as kernel configuration or mtd-tools installation?

Thanks a lot!

best wishes, shizheng

shizheng

author

2008-01-07 05:54 UTC #1 lore raw

By default nandsim creates device of 8MB.

# cat /proc/mtd
dev:	size	erasesize  name
mtd0:	08000000 00004000  "NAND simulator partition 0"

Quoted 76 lines

Quoted 74 lines · Vinit Agnihotri
yeah & 1 more...use mtdram instead of nandsim.
modprobe mtdram=40960 will create mtd device of size 40MB, besides that you can write small tool for creating & deleting volumes, its simple.
you can find ioctl's & structures code in include/mtd/ubi-user.h.
--Vinit.
Quoted 61 lines · Vinit Agnihotri
You have loaded Nandsim with default, may be theres not enough space on nandsim to create 20Mib volume,
I guess by default nandsim creates device of 8MB. you can check it by looking a /proc/mtd.
so try creating volume of smaller size or pass appropriate module parameters to nandsim module,
do a modinfo nandsim or straight way have look in its code, I assume that you have proper privileges to run ubimkvol.
still I dont have justification for that strange error, but try this out.
--Vinit.
Quoted 29 lines · 时正
Hi all,
I wanna have a try of ubifs on nandsim, and do as what the ubifs wiki tells me
(http://osl.sed.hu/wiki/ubifs/index.php/Download_the_source).
1. compile, install and boot the new kernel(2.6.23)
the configuration option for ubi and nandsim is default turned on as module.
2. make the mtd-utils to produce ubimkvol
3. create a ubi when I got the error
# modprobe nandsim
# modprobe ubi mtd=0
# ls /dev/ubi0 -l
crw-rw---- 1 root root 253, 0 2007-12-25 01:46 /dev/ubi0
# ls /sys/class/ubi -l
drwxr-xr-x 3 root root 0 2007-12-25 01:46 ubi0
-r--r--r-- 1 root root 4096 2007-12-25 01:49 version
# ubimkvol /dev/ubi0 -n 0 -N test -s 20MiB
libubi error: readdir failed on "/sys/class/ubi"
readdir: No such file or directory
ubimkvol error: "/dev/ubi0" is not an UBI device node
it's so strange about the readdir failure, because there is the ubi0 entry in sysfs.
did I miss any step, such as kernel configuration or mtd-tools installation?
Quoted 10 lines
Thanks a lot!
best wishes, shizheng
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
--
Life is so short. So, follow some rules. Forgive quickly, believe slowly, love truly, laugh loudly & never avoid anything that makes U smile.

shizheng

author

2008-01-07 06:01 UTC #2 lore raw

Quoted 3 lines

By default nandsim creates device of 8MB.

~~~~~~ Sorry, this shold be 128MB :-)

Quoted 80 lines

# cat /proc/mtd
dev:	size	erasesize  name
mtd0:	08000000 00004000  "NAND simulator partition 0"
Quoted 1 line
/
/>/ Vinit Agnihotri wrote:
/>>/ yeah & 1 more...use mtdram instead of nandsim.
/>>/ modprobe mtdram=40960 will create mtd device of size 40MB,
/>>/ besides that you can write small tool for creating & deleting volumes,
/>>/ its simple.
/>>/ you can find ioctl's & structures code in include/mtd/ubi-user.h.
/>>/
/>>/ --Vinit.
/>>/
/>>/ On Jan 6, 2008 1:23 PM, Vinit Agnihotri <vinit.agnihotri at gmail.com <http://lists.infradead.org/mailman/listinfo/linux-mtd>> wrote:
/>>/
/>>>/ You have loaded Nandsim with default, may be theres not enough space
/>>>/ on nandsim to create 20Mib volume,
/>>>/ I guess by default nandsim creates device of 8MB. you can check it by
/>>>/ looking a /proc/mtd.
/>>>/ so try creating volume of smaller size or pass appropriate module
/>>>/ parameters to nandsim module,
/>>>/ do a modinfo nandsim or straight way have look in its code, I assume
/>>>/ that you have proper privileges to run ubimkvol.
/>>>/ still I dont have justification for that strange error, but try this out.
/>>>/
/>>>/ --Vinit.
/>>>/
/>>>/
/>>>/ On Jan 6, 2008 11:14 AM, 时正 <shizheng at mail.ustc.edu.cn <http://lists.infradead.org/mailman/listinfo/linux-mtd>> wrote:
/>>>/
/>>>>/ Hi all,
/>>>>/ I wanna have a try of ubifs on nandsim, and do as what the ubifs wiki
/>>>>/ tells me
/>>>>/ (http://osl.sed.hu/wiki/ubifs/index.php/Download_the_source).
/>>>>/
/>>>>/ 1. compile, install and boot the new kernel(2.6.23)
/>>>>/ the configuration option for ubi and nandsim is default turned on as module.
/>>>>/
/>>>>/
/>>>>/ 2. make the mtd-utils to produce ubimkvol
/>>>>/
/>>>>/ 3. create a ubi when I got the error
/>>>>/ # modprobe nandsim
/>>>>/ # modprobe ubi mtd=0
/>>>>/ # ls /dev/ubi0 -l
/>>>>/ crw-rw---- 1 root root 253, 0 2007-12-25 01:46 /dev/ubi0
/>>>>/ # ls /sys/class/ubi -l
/>>>>/ drwxr-xr-x 3 root root 0 2007-12-25 01:46 ubi0
/>>>>/ -r--r--r-- 1 root root 4096 2007-12-25 01:49 version
/>>>>/ # ubimkvol /dev/ubi0 -n 0 -N test -s 20MiB
/>>>>/ libubi error: readdir failed on "/sys/class/ubi"
/>>>>/ readdir: No such file or directory
/>>>>/ ubimkvol error: "/dev/ubi0" is not an UBI device node
/>>>>/
/>>>>/ it's so strange about the readdir failure, because there is the ubi0
/>>>>/ entry in sysfs.
/>>>>/
/>>>>/ did I miss any step, such as kernel configuration or mtd-tools installation?
/>>>>/
/>>>>/ Thanks a lot!
/>>>>/
/>>>>/ best wishes, shizheng
/>>>>/
/>>>>/
/>>>>/ ______________________________________________________
/>>>>/ Linux MTD discussion mailing list
/>>>>/ http://lists.infradead.org/mailman/listinfo/linux-mtd/
/>>>>/
/>>>>/
/>>>/
/>>>/ --
/>>>/ Life is so short. So, follow some rules. Forgive quickly, believe
/>>>/ slowly, love truly, laugh loudly & never avoid anything that makes U
/>>>/ smile.
/>>>/
/>>>/
/>>/
/>>/
/>>

Adrian Hunter

2008-01-07 07:54 UTC #3 lore raw

In reply to 时正

Quoted 31 lines · 时正

Hi all,
I wanna have a try of ubifs on nandsim, and do as what the ubifs wiki tells me
(http://osl.sed.hu/wiki/ubifs/index.php/Download_the_source).
1. compile, install and boot the new kernel(2.6.23)
the configuration option for ubi and nandsim is default turned on as module.
2. make the mtd-utils to produce ubimkvol
3. create a ubi when I got the error
# modprobe nandsim
# modprobe ubi mtd=0
# ls /dev/ubi0 -l
crw-rw---- 1 root root 253, 0 2007-12-25 01:46 /dev/ubi0
# ls /sys/class/ubi -l
drwxr-xr-x 3 root root 0 2007-12-25 01:46 ubi0
-r--r--r-- 1 root root 4096 2007-12-25 01:49 version
# ubimkvol /dev/ubi0 -n 0 -N test -s 20MiB
libubi error: readdir failed on "/sys/class/ubi"
readdir: No such file or directory
ubimkvol error: "/dev/ubi0" is not an UBI device node
it's so strange about the readdir failure, because there is the ubi0 entry in sysfs.
did I miss any step, such as kernel configuration or mtd-tools installation?
Thanks a lot!

Quoted 8 lines

best wishes, shizheng
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
From b96f4481662bd7ac247d4d5a25b27f7d8afffb92 Mon Sep 17 00:00:00 2001

From: Adrian Hunter <[email protected]>
Date: Mon, 7 Jan 2008 09:47:17 +0200
Subject: ubi-utils: fix bug using readdir

Library functions never reset errno to zero, so if you want to use its value to check for errors then you must set it to zero before calling the library function (in this case readdir).

Signed-off-by Adrian Hunter <[email protected]>

---
ubi-utils/src/libubi.c | 13 +++++++++++--

1 files changed, 11 insertions(+), 2 deletions(-)

ubi-utils/src/libubi.c +0 -0

index 855aa82..be06f70 100644
@@ -872,9 +872,13 @@ int ubi_get_info(libubi_t desc, struct ubi_info *info)

	}

	info->lowest_dev_num = INT_MAX;
-	while ((dirent = readdir(sysfs_ubi))) {
+	while (1) {
		int dev_num, ret;

+ errno = 0;
+ dirent = readdir(sysfs_ubi);
+ if (!dirent)
+ break;
/*
* Make sure this direntry is a directory and not a symlink -
* Linux puts symlinks to UBI volumes on this UBI device to the
@@ -1022,9 +1026,14 @@ int ubi_get_dev_info1(libubi_t desc, int dev_num, struct ubi_dev_info *info)

		return -1;

	info->lowest_vol_num = INT_MAX;
-	while ((dirent = readdir(sysfs_ubi))) {
+
+	while (1) {
		int vol_id, ret, devno;

+ errno = 0;
+ dirent = readdir(sysfs_ubi);
+ if (!dirent)

+			break;
		ret = sscanf(dirent->d_name, UBI_VOL_NAME_PATT, &devno, &vol_id);
		if (ret == 2 && devno == dev_num) {
			info->vol_count += 1;

Signature · 1 line

1.4.4.2

Artem Bityutskiy

2008-01-15 08:12 UTC #4 lore raw

Quoted 10 lines · Adrian Hunter

From b96f4481662bd7ac247d4d5a25b27f7d8afffb92 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <[email protected]>
Date: Mon, 7 Jan 2008 09:47:17 +0200
Subject: ubi-utils: fix bug using readdir
Library functions never reset errno to zero, so if you want to use its value to check for errors then you must set it to zero before calling the library function (in this case readdir).
Signed-off-by Adrian Hunter <[email protected]>

Thanks, committed.

Signature · 2 lines

Best regards,
Artem Bityutskiy (Битюцкий Артём)