Question concerning discontinuities in memory map.
I have a question concerning a discontinuity in my memory map. The development board that I am
working on currently has the start of its SDRAM at 0x14000000 (physical memory). It looks like a
lot of the code is written under the assumption that the base of the kernel will be at 0x80000000. I
have had to modify several sections of code to handle this discontinuity with respect to max_low_pfn,high_memory, num_physpages max_mapnr, and low (/arch/mips/mm/init.c). These variables seem
to use the PAGE_SHIFT variable to locate the start of that page in
physical memory: (e.g., max_mapnr
<< PAGE_SHIFT). It looks like a lot of the problem stems from max_low_pfn. In init_bootmem_core:
----8< snippet from init_bootmem_core ( mm/bootmem.c) 8<----------
static unsigned long __init init_bootmem_core (bootmem_data_t
*bdata,
unsigned long mapstart, unsigned long start,
unsigned long end)
{
unsigned long mapsize = ((end - start)+7)/8;
mapsize = (mapsize + (sizeof(long) - 1UL)) &
~(sizeof(long) - 1UL);
bdata->node_bootmem_map = phys_to_virt(mapstart <<
PAGE_SHIFT);
bdata->node_boot_start = (start << PAGE_SHIFT);
bdata->node_low_pfn = end;
...----------------------------------------------------
the mapsize is defined by end-start, where start is the _end (kernel_end) + bootmap_size.
therefore it looks like end should represent the end of memory (i.e. SDRAM). In our case
this is 0x15FFFFFF (i.e. 32M). If I let the rest of the kernel process max_low_pfn and the
associated variable normally, the paging routines will calculate that I have 335M of memory!
I seem to be chasing this problem through the kernel. Is there a central place in the code that
would handle the offset properly? I don't think I have caught all of the implications of this change
yet because I am still failing in the paging routines. Any information that is available on how this
can be accomplished would be greatly appreciated.
Thanks,
Jeff
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Harrell Work: (801) 619-6104 Broadband Access group/TI Cell: (801) 597-6268
[email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
begin:vcard
n:Harrell;Jeff
tel;cell:(801) 597-6268
tel;fax:(801) 619-6150
tel;work:(801) 619-6104
x-mozilla-html:TRUE
url:http://www.ti.com
org:Broadband Access Group
version:2.1
email;internet:[email protected]
title:Texas Instruments
adr;quoted-printable:;;170 West Election Rd. Suite 100 =0D=0AMS 4106 ;Draper;Utah;84020-6410;USA
x-mozilla-cpt:;0
fn:Jeff Harrell
end:vcard