the story so far, long ago now good news
A message that is not in the archive (sent off-list or not yet received): [email protected]
[cc'ed to linuxppc-dev and Paul-Mackerras to include in official kernel]
Quoted 5 lines
Hello Gabriel,
cat
/proc/partitionsoutput looks very good. exactly what we have put in.
Hi Richard,
Although this patch probably will not solve your crashes, I have just hit the same problem as you when running fdisk on a drive transferred from a PC. Endian conversions were missing when reading the partition table which confused the get geometry ioctl (the kernel debugging messages gave the impression that I had about 2 terabytes on this disk, probably using a novel and patented compression meathod to fit it into 1Gb).
At least fdisk should now work properly.
Here is the patch:
===== drivers/scsi/scsicam.c 1.1 vs edited =====
drivers/scsi/scsicam.c +3 -3
@@ -105,7 +105,7 @@unsigned int logical_end, physical_end, ext_physical_end; -if (*(unsigned short *) (bh->b_data +510 ) ==0xAA55 ) { +if (*(unsigned short *) (bh->b_data +510 ) ==cpu_to_le16 (0xAA55 )) {for (largest_cyl =-1 , p = (struct partition *) (0x1BE + bh->b_data), i =0 ; i <4 ; ++i, ++p) {if (!p->sys_ind)
@@ -138,8 +138,8 @@ end_head * end_sector + end_sector;/* This is the actual _sector_ number at the end */ - logical_end =get_unaligned (&largest->start_sect) - +get_unaligned (&largest->nr_sects); + logical_end =le32_to_cpu (get_unaligned (&largest->start_sect)) + +le32_to_cpu (get_unaligned (&largest->nr_sects));/* This is for >1023 cylinders */ ext_cyl = (logical_end - (end_head * end_sector + end_sector))
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/