ne2k/wd3018 driver
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi folks,
Does anyone know why a Linux ethernet driver might appear to be up & working (that is, no errors, ifconfig says UP, etc), and the board has a link light on it, but the hub link light is not on and no packets are transmitted or received? rmmod/insmod of the driver doesn't help.
I have an ne2k/ISA Atlantic card that is doing this in either wd or ne mode with a 2.2.14 kernel, and can't get it running... help!
Ruth
Signature · 7 lines
Ruth Ivimey-Cook [email protected] Technical Author, ARM Ltd [email protected] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/
Quoted 7 lines
Does anyone know why a Linux ethernet driver might appear to be up & working (that is, no errors, ifconfig says UP, etc), and the board has a link light on it, but the hub link light is not on and no packets are transmitted or received? rmmod/insmod of the driver doesn't help.
I have an ne2k/ISA Atlantic card that is doing this in either wd or ne mode with a 2.2.14 kernel, and can't get it running... help!
Plug the cable into the hub before powering up the chip ? I have at least one crap ne2k clone that only does the detect at boot
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/