Skip to contentSkip to conversation

BDM recommendations

DISCUSSION Kyle Harris 4 participants 4 messages Oct 26, 2000 – Oct 27, 2000

lore
Share & tools
lore
#0 lore raw

Hi,

I'm looking to purchase a new BDM emulator. Does anyone have suggestions. I've been using EST's for several years on the 68xxx platform and have been very pleased with it. But, of course, the PPC is not supported with my current model and they recommend upgrading to visionProbe for support ($$$).

Thanks for any advice.

Kyle.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 8 lines · Kyle Harris

Hi,

I'm looking to purchase a new BDM emulator. Does anyone have suggestions. I've been using EST's for several years on the 68xxx platform and have been very pleased with it. But, of course, the PPC is not supported with my current model and they recommend upgrading to visionProbe for support ($$$).

Sounds like time to upgrade to a BDI2000 (http://www.abatron.ch). For your money you get a quality Ethernet JTAG probe with a telnet/GDB frontend and the best support I have every received from any tools vendor (HMI, EST, and Applied included).

Going EST buys you into the famous Windriver support vacuum. :)

--
Matt Porter
MontaVista Software, Inc.
[email protected]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
In reply to Kyle Harris
Quoted 3 lines · In message <[email protected]> Kyle Harris wrote:

I'm looking to purchase a new BDM emulator. Does anyone have suggestions. I've been using EST's for several years on the 68xxx

Since you're asking in a Linux group, it is probably important that you chose one that supports the MMU to allow Linux kernel and device driver debugging.

At the moment I know of only one commercial product that integrates well in a Linux environment: that's the BDI2000 by Abatron (see www.abatron.ch). It provides boh a siple telnet interface (which is useful for instance for image download or flash programming), and also talks GDB remote protocol over the net, so you can attach easily with GDB.

The other, non-commercial solution is MPCBDM or BDM4GDB as it's being called today; see http://bdm4gdb.sourceforge.net/ .

Please let me know if you need more details.

Hope this helps,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] In the beginning, there was nothing, which exploded.
- Terry Pratchett, _Lords and Ladies_

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#3 lore raw
In reply to Kyle Harris

Hello

Quoted 5 lines

I'm looking to purchase a new BDM emulator. Does anyone have suggestions. I've been using EST's for several years on the 68xxx platform and have been very pleased with it. But, of course, the PPC is not supported with my current model and they recommend upgrading to visionProbe for support ($$$).

I also bough one BDI2000 for PowerPc 82XX from Abatron, the product is quite good, support works not only fix problems but also to improve the product. For example I received frequent firmware updates with new features (support for MMU, Linux kernel image download). With DDD in control of the BDI box you get a great graphical debugger.

Just another happy user

-----------------------------------------------------------------------
Eurico Mendes Inocencio CDFtel,
Lda

 Ph. No:  +351.22.3389843         Rua Goncalo Cristovao, 347 - Sala 205
 FAX No:  +351.22.3389845         4000-270 PORTO
 E-mail:  mailto:[email protected]    Portugal

-----------------------------------------------------------------------

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/