kernel 2.4.0-test9 nd bttv
it look like you didn't add the lines to .config the stupid bttv drivers that's why mine didnt work with bttv card i have read the .config under video for linux and found no refernce to bttv???
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 3 lines · vwbug
it look like you didn't add the lines to .config the stupid bttv drivers that's why mine didnt work with bttv card i have read the .config under video for linux and found no refernce to bttv???
I'm not sure if this is what you mean, but you have to enable I2C support and I2C bit-banging interfaces to be able to select BT848 support.
Erik
[happily using his BT848 card under 2.4.0-test10-pre3]
Signature · 9 lines
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [email protected] WWW: http://www-ict.its.tudelft.nl/~erik/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/