2.2.17 wont compile on AMD k6@-550

Hello kernel hackers,

I am having problems with compiling a kernel on an AMD K62-550.
I am running Red Hat 6.2, and am getting error messages like this:

cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce
-m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=686 -c
-o tcp_output.o tcp_output.c
cc: Internal compiler error: program cc1 got fatal signal 11 make[3]: *** [tcp_output.o] Error 1
make[3]: Leaving directory `/usr/src/linux/net/ipv4' make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/usr/src/linux/net/ipv4' make[1]: *** [_subdir_ipv4] Error 2
make[1]: Leaving directory `/usr/src/linux/net'
make: *** [_dir_net] Error 2

my cpuinfo is as follows:

processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 551.243978
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mmx 3dnow bogomips : 1101.00

This is the first time I have posted anyting kernel compile related so let me know what you need.

Thanks in Advanced,

--
Kind Regards
Timothy A. DeWees

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

        Hi,

http://www.bitwizard.nl/sig11/

Have fun,

Jochen.

FAQ zur Newsgroup at.linux:
<http://alfie.ist.org/LinuxFAQ/>

sig11 is typical for overclocking. If this is the case, try using the factory setting. I know there are 550 MHz K6-2's nowadays, but you may not have enough cooling to support it. If it still bugs at a lower clock-rate, feel free to send in another bug-report.

Regards: David Weinehall
_ _
// David Weinehall <[email protected]> /> Northern lights wander \\

//  Project MCA Linux hacker        //  Dance across the winter sky //
\>  http://www.acc.umu.se/~tao/    </   Full colour fire           </

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

SIG11 is almost always a hardware problem. Read the SIG11-HOWTO (is that called that way ?)

Igmar

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/