Skip to contentSkip to conversation

2.2.18pre and intel e100 net

DISCUSSION Florin Andrei 1 participant 2 messages Dec 5, 2000 – Dec 7, 2000

lore
Share & tools
lore

Florin Andrei

author
#0 lore raw

Anyone tryied to build the drivers from Intel for the e100 (pro/100) network
card using a 2.2.18pre kernel? I tried, and i'm gettting this error:

In file included from e100.c:124:
e100.h:265: conflicting types for dma_addr_t' /usr/src/linux/include/asm/types.h:44: previous declaration of dma_addr_t' {standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
make: *** [e100_main.o] Error 1

(Red Hat 7.0, and i tried both gcc and kgcc)

Signature · 6 lines
Florin Andrei

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
author
#1 lore raw
Quoted 8 lines · Florin Andrei

Anyone tryied to build the drivers from Intel for the e100 (pro/100)
network card using a 2.2.18pre kernel? I tried, and i'm gettting this error:

In file included from e100.c:124:
e100.h:265: conflicting types for dma_addr_t' /usr/src/linux/include/asm/types.h:44: previous declaration of dma_addr_t'

[snip]

Quoted 1 line

(Red Hat 7.0, and i tried both gcc and kgcc)

Well, i tried to comment out the offending line in e100.h and the module
compiled just fine. But when i try to load it, complains about some missing symbol...
Anyone solved this?

Signature · 8 lines
Florin Andrei



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/