Skip to contentSkip to conversation

FAQ/

DISCUSSION Olaf Zaplinski 11 participants 22 messages Dec 12, 2000 – Dec 18, 2000 MIPS

lore
Share & tools
lore
#0 lore raw

Hi all,

can someone please point me to a Howto/FAQ? I'd like to put Linux on my SNI RM200 machine (R4600, 64MB). Can I use the Hardhat distribution, or does it run on SGIs only?

Olaf

#1 lore raw
Quoted 5 lines · Olaf Zaplinski

Hi all,

can someone please point me to a Howto/FAQ? I'd like to put Linux on my SNI RM200 machine (R4600, 64MB). Can I use the Hardhat distribution, or does it run on SGIs only?

The RM200 was supported only in little endian mode with the Windows NT firmware - Nobody knows (chance is little) if the tree will still work.

You will need the decstation root not the hardhat tarball as that is strictly big endian.

Flo

Signature · 2 lines
Florian Lohoff                  [email protected]             +49-5201-669912
     Why is it called "common sense" when nobody seems to have any?
#2 lore raw

Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as there is no doc at all, this dist is unusuable... perhaps I am lucky with that, I strongly dislike the Debian dist.

Olaf

Quoted 18 lines · Florian Lohoff
Quoted 5 lines · Olaf Zaplinski

Hi all,

can someone please point me to a Howto/FAQ? I'd like to put Linux on my SNI RM200 machine (R4600, 64MB). Can I use the Hardhat distribution, or does it run on SGIs only?

The RM200 was supported only in little endian mode with the Windows NT firmware - Nobody knows (chance is little) if the tree will still work.

You will need the decstation root not the hardhat tarball as that is strictly big endian.

Flo
--
Florian Lohoff [email protected] +49-5201-669912
Why is it called "common sense" when nobody seems to have any?

#3 lore raw
Quoted 3 lines · Olaf Zaplinski

Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as there is no doc at all, this dist is unusuable... perhaps I am lucky with that, I strongly dislike the Debian dist.

Try searching for 'declinux'.

MfG, JBG

Signature · 4 lines
Fehler eingestehen, Größe zeigen: Nehmt die Rechtschreibreform zurück!!!
/* Jan-Benedict Glaw <[email protected]> -- +49-177-5601720 */
keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB
     "insmod vi.o and there we go..." (Alexander Viro on linux-kernel)
#4 lore raw
In reply to Olaf Zaplinski
Quoted 3 lines · Olaf Zaplinski

Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as there is no doc at all, this dist is unusuable... perhaps I am lucky with that, I strongly dislike the Debian dist.

Btw, what kind of doc do you expect? The MIPS port is, well, everything but a "customer linux" right now. It's more-or-less working for people who know what they do. There's no installer comparable to a regular PC installation (insert boot CDROM, press enter sometimes, ready). Everything you can expect is a tarball, which can be mounted via nfsroot. There you can find a kernel inside which you can boot over bootp/tftp (or via mop, if you have not so much luck). Then, you can locally fdisk/mkfs/mount your HDDs and copy everything by hand. That's the installation.

Anything else still needs to be written. I've started an approach of a clean debian root filesystem (ftp.lug-owl.de) you may want to try. However, Debian is currently the only distribution supporting those machines at all. The declinux image is heavily outdated and ships a totally broken libc with it... It's no fun!

MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G
PS: http://oss.sgi.com/mips/mips-howto.html

Signature · 4 lines
Fehler eingestehen, Größe zeigen: Nehmt die Rechtschreibreform zurück!!!
/* Jan-Benedict Glaw <[email protected]> -- +49-177-5601720 */
keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB
     "insmod vi.o and there we go..." (Alexander Viro on linux-kernel)
#5 lore raw
Quoted 15 lines · Jan-Benedict Glaw
Quoted 3 lines · Olaf Zaplinski

Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as there is no doc at all, this dist is unusuable... perhaps I am lucky with that, I strongly dislike the Debian dist.

Btw, what kind of doc do you expect? The MIPS port is, well, everything but a "customer linux" right now. It's more-or-less working for people who know what they do. There's no installer comparable to a regular PC installation (insert boot CDROM, press enter sometimes, ready). Everything you can expect is a tarball, which can be mounted via nfsroot. There you can find a kernel inside which you can boot over bootp/tftp (or via mop, if you have not so much luck). Then, you can locally fdisk/mkfs/mount your HDDs and copy everything by hand. That's the installation.

Quoted 9 lines

Anything else still needs to be written. I've started an approach of a clean debian root filesystem (ftp.lug-owl.de) you may want to try. However, Debian is currently the only distribution supporting those machines at all. The declinux image is heavily outdated and ships a totally broken libc with it... It's no fun!

MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G
PS: http://oss.sgi.com/mips/mips-howto.html

Hm I am still working on the boot floppies for debian, when I have the time. for mipsel they should work, but I only build them for mips.
the problem on mips was the sgi disklabel, but that isnt used on dec.

Signature · 1 line
Henning Heinold
#17 lore raw
In reply to Jan-Benedict Glaw

Huh, I don't expect comfort. But I expect a x68 Linux users guide to the world of MIPS systems. Okay, I know my RM 200 quite well, had compiled several progs under Sinix, put it in LE mode and installes WinNT 4.0. I use Linux since the 0.something kernel. The problem is that the Debian WWW site consists of lots of "404" errors. On the ftp site there is no docu at all that would tell me how to proceed. For Hardhat, I have found this information.

What I want: a documentation of the form:

- how to prepare your bootp server
- how to boot the kernel via bootp
- how to start some install script *or* boot your mini-dist/root-fs via NFS, fdisk, cp and enjoy

That would be enough.

Olaf

Quoted 33 lines · Jan-Benedict Glaw
Quoted 3 lines · Olaf Zaplinski

Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as there is no doc at all, this dist is unusuable... perhaps I am lucky with that, I strongly dislike the Debian dist.

Btw, what kind of doc do you expect? The MIPS port is, well, everything but a "customer linux" right now. It's more-or-less working for people who know what they do. There's no installer comparable to a regular PC installation (insert boot CDROM, press enter sometimes, ready). Everything you can expect is a tarball, which can be mounted via nfsroot. There you can find a kernel inside which you can boot over bootp/tftp (or via mop, if you have not so much luck). Then, you can locally fdisk/mkfs/mount your HDDs and copy everything by hand. That's the installation.

Anything else still needs to be written. I've started an approach of a clean debian root filesystem (ftp.lug-owl.de) you may want to try. However, Debian is currently the only distribution supporting those machines at all. The declinux image is heavily outdated and ships a totally broken libc with it... It's no fun!

MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G
PS: http://oss.sgi.com/mips/mips-howto.html

--
Fehler eingestehen, Größe zeigen: Nehmt die Rechtschreibreform zurück!!! /* Jan-Benedict Glaw <[email protected]> -- +49-177-5601720 */ keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB
"insmod vi.o and there we go..." (Alexander Viro on linux-kernel)

----------------------------------------------------------------------------
Part 1.2Type: application/pgp-signature

#6 lore raw
In reply to H.Heinold
Quoted 6 lines · H.Heinold
Quoted 6 lines

Anything else still needs to be written. I've started an approach of a clean debian root filesystem (ftp.lug-owl.de) you may want to try. However, Debian is currently the only distribution supporting those machines at all. The declinux image is heavily outdated and ships a totally broken libc with it... It's no fun!

Quoted 7 lines
Quoted 3 lines

MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G
PS: http://oss.sgi.com/mips/mips-howto.html

Hm I am still working on the boot floppies for debian, when I have the time. for mipsel they should work, but I only build them for mips.
the problem on mips was the sgi disklabel, but that isnt used on dec.

But SGI's don't have floppies :-)

Ralf

#7 lore raw
Quoted 7 lines · Ralf Baechle
Quoted 3 lines · H.Heinold

Hm I am still working on the boot floppies for debian, when I have the time. for mipsel they should work, but I only build them for mips.
the problem on mips was the sgi disklabel, but that isnt used on dec.

But SGI's don't have floppies :-)

Question in charge: Do DECstations really have floppies? Mine do not... So vor me it's only relevant to have an nfsroot.tgz allowing me to install further packages...

MfG, JBG

Signature · 4 lines
Fehler eingestehen, Größe zeigen: Nehmt die Rechtschreibreform zurück!!!
/* Jan-Benedict Glaw <[email protected]> -- +49-177-5601720 */
keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB
     "insmod vi.o and there we go..." (Alexander Viro on linux-kernel)
#18 lore raw
In reply to Olaf Zaplinski
Quoted 1 line · Olaf Zaplinski

- how to prepare your bootp server

Install bootp (or dhcpd, which can do bootp as well) and read its documentation.

Quoted 1 line

- how to boot the kernel via bootp

This is specific to your machine's firmware.

Quoted 2 lines

- how to start some install script *or* boot your mini-dist/root-fs via NFS, fdisk, cp and enjoy

less ./linux/Documentation/nfsroot.txt

~~VeryShortVersion~~:
- Activate "IP Auto Configuration" in "Networking Options"
- Build NFS directly into your kernel; there, also activate NFS-Root support
- "root=/dev/nfs" as one command option when booting the kernel (this is the easyest method). Then, the client mounts /tftpboot/<IP-Addr> from the server which did the bootp reply. Otoh, you could configure your bootp server to provide a different boot server or boot path.

fdisk and cp (btw, you should better use tar in a pipe for that...) should be no problem...

MfG, JBG

Signature · 4 lines
Fehler eingestehen, Größe zeigen: Nehmt die Rechtschreibreform zurück!!!
/* Jan-Benedict Glaw <[email protected]> -- +49-177-5601720 */
keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB
     "insmod vi.o and there we go..." (Alexander Viro on linux-kernel)
#8 lore raw
In reply to Jan-Benedict Glaw
Quoted 8 lines · On 17-Dec-00 Jan-Benedict Glaw wrote:
Quoted 7 lines · Ralf Baechle
Quoted 4 lines · H.Heinold

Hm I am still working on the boot floppies for debian, when I have the time.
for mipsel they should work, but I only build them for mips. the problem on mips was the sgi disklabel, but that isnt used on dec.

Quoted 5 lines
Quoted 1 line

But SGI's don't have floppies :-)

Question in charge: Do DECstations really have floppies? Mine do not... So vor me it's only relevant to have an nfsroot.tgz allowing me to install further packages...

Besides Maxines DECstations don't have floppies. Well, there are some with SCSI floppies but that doesn't count.

Anyway, everything that fit's on a floppy would fit into a ramdisk as well. Compile this ramdisk image into the kernel, boot with "root=/dev/ram", et voila...

Working on "boot floppies" *does* make sense, IMHO.

Signature · 2 lines
Regards,
Harald
#20 lore raw
In reply to Jan-Benedict Glaw
Quoted 5 lines · Jan-Benedict Glaw

Anything else still needs to be written. I've started an approach of a clean debian root filesystem (ftp.lug-owl.de) you may want to try. However, Debian is currently the only distribution supporting those machines at all. The declinux image is heavily outdated and ships a totally broken libc with it... It's no fun!

I have a much newer one ready, but I don't have upload permission anymore on oss.sgi.com. I've asked Quentin and Ralf to arrange this, but nothing yet... As soon as I can put files on oss again, I'll upload my new RH6.1 based root image.

Signature · 6 lines
Karel van Houten

----------------------------------------------------------
The box said "Requires Windows 95 or better."
I can't understand why it won't work on my Linux computer. 
----------------------------------------------------------
#19 lore raw
In reply to Olaf Zaplinski
Quoted 8 lines · Olaf

Huh, I don't expect comfort. But I expect a x68 Linux users guide to the world of MIPS systems. Okay, I know my RM 200 quite well, had compiled several progs under Sinix, put it in LE mode and installes WinNT 4.0. I use Linux since the 0.something kernel. The problem is that the Debian WWW site consists of lots of "404" errors. On the ftp site there is no docu at all that would tell me how to proceed. For Hardhat, I have found this information.

Quoted 6 lines

What I want: a documentation of the form:

- how to prepare your bootp server
- how to boot the kernel via bootp
- how to start some install script *or* boot your mini-dist/root-fs via NFS, fdisk, cp and enjoy

Have you looked at my DECStation installation HOWTO?
http://www.xs4all.nl/~vhouten/mipsel

Signature · 6 lines
Karel van Houten

----------------------------------------------------------
The box said "Requires Windows 95 or better."
I can't understand why it won't work on my Linux computer. 
----------------------------------------------------------
#14 lore raw
In reply to Jan-Benedict Glaw
Quoted 3 lines · Jan-Benedict Glaw

Question in charge: Do DECstations really have floppies? Mine do not... So vor me it's only relevant to have an nfsroot.tgz allowing me to install further packages...

Well - the Maxine (Personal DECstation) has a floppy controller and it was possible to order it with a floppy disk drive installed, but I have not seen one of these in real life yet :-).

Greetings,
Karsten

Signature · 4 lines
#include <standard_disclaimer>
Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung
oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder
Meinungsforschung.
#21 lore raw
In reply to Karel van Houten

hi,

sorry for the missunderstanding. I meant the debian-bootfloppies and only the initrd which can be transfer with the kernel over tftp. I know sgi's only have flopticals. wiht the so called bootfloppies you will be able to install debian as on the other arch's.

Signature · 1 line
Henning Heinold
#9 lore raw
In reply to Harald Koerfgen
Quoted 6 lines · Harald Koerfgen
Quoted 3 lines

Question in charge: Do DECstations really have floppies? Mine do not... So vor me it's only relevant to have an nfsroot.tgz allowing me to install further packages...

Besides Maxines DECstations don't have floppies. Well, there are some with SCSI floppies but that doesn't count.

Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik have 20mb capacity.

Ralf

#10 lore raw
Quoted 2 lines · Ralf Baechle

Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik have 20mb capacity.

Indeed, I even own such a nifty thing. It's pretty cool, with one problem:
No media ;-) . But it's able to read floppies, I'm altough not sure if it will boot.

CU, Klaus

Signature · 4 lines
Full Name   : Klaus Naumann     | (http://www.mgnet.de/) (Germany)
Nickname    : Spock             | Org.: Mad Guys Network
Phone / FAX : ++49/177/7862964  | E-Mail: ([email protected])
PGP Key     : www.mgnet.de/keys/key_spock.txt
#11 lore raw
Quoted 6 lines · Klaus Naumann
Quoted 2 lines

Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik have 20mb capacity.

Indeed, I even own such a nifty thing. It's pretty cool, with one problem:
No media ;-) . But it's able to read floppies, I'm altough not sure if it will boot.

In theory it can. In practice every machine I've ever is violating the ARC standard massively, so only trying will show. For Indys probably the prefer installation media will stay NFS or CDROM for all times. Now if the darn thing would just handle ISO9660 CDROMs ...

Ralf

#12 lore raw
In reply to Klaus Naumann
Quoted 8 lines · Klaus Naumann
Quoted 2 lines · Ralf Baechle

Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik have 20mb capacity.

Indeed, I even own such a nifty thing. It's pretty cool, with one problem:
No media ;-) . But it's able to read floppies, I'm altough not sure if it will boot.

I've used an SGI personal-Iris 4D/35 which had a real floppy drive. Of course, I guess it's questionable whether the docs will ever surface to port Linux to it. It had a 36Mhz R3000 processor in it if I recall.

Vince

____________
\ /\ /\ / Vince Weaver
\/__\/__\/ [email protected] http://www.glue.umd.edu/~weave

#13 lore raw
In reply to Harald Koerfgen

In message <[email protected]> Harald Koerfgen writes:
: Besides Maxines DECstations don't have floppies. Well, there are some with SCSI : floppies but that doesn't count.

I don't know if the floppies I used were scsi or not and I no longer have access to the machines to check :-)

Warner

#16 lore raw
In reply to Ralf Baechle
Quoted 6 lines · Ralf Baechle
Quoted 3 lines

Hm I am still working on the boot floppies for debian, when I have the time. for mipsel they should work, but I only build them for mips.
the problem on mips was the sgi disklabel, but that isnt used on dec.

But SGI's don't have floppies :-)

The package is only called "boot-floppies" - It doesnt have much in common with "floppy" images on architectures not having floppy drives. It more or less the debian installer source package. They for example build kernel/ramdisk images with the installer for architectures capable of bootp/tftp like Sun SPARC. We will do similar for Decstations and SGI and forget the "real" disk images. The problem is that most of the software is more or less custom debian and will require some work concerning SGI Disklabel, Kernel 2.4 etc - Henning has done a lot in there and hopefully Decstations are much simpler (DOS Disklabel)

But still - The biggest problems are glibc, gcc + binutils.

Flo

Signature · 2 lines
Florian Lohoff                  [email protected]             +49-5201-669912
     Why is it called "common sense" when nobody seems to have any?