aic7xxx
Hi!
I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When ever I try to load it as a module or if I compile it in the kernel I get the folowing error messages. The last 4 messages repeats for ever. The problem is on 3 diffrent machines. Anyone who know what it can be and how to fix it.
/Eastbay
(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/19/0 (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Cables present (Int-50 NO, Ext-50 NO)
(scsi0) Downloading sequencer code... 415 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AHA-294X SCSI host adapter>
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder SCSI bus is being reset for host 0 channel 0.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
I am also having problems with this driver, but with different adapters and symptoms. depmod is reporting a lot of unresolved symbols for generic scsi and scsi cdrom. Compiling it into the kernel instead of as a module seems to bypass the problems.
stewart
Quoted 10 lines · Mathias Wiklander
Hi!
I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When ever I try to load it as a module or if I compile it in the kernel I get the folowing error messages. The last 4 messages repeats for ever. The problem is on 3 diffrent machines. Anyone who know what it can be and how to fix it.
/Eastbay
Quoted 17 lines
(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/19/0 (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Cables present (Int-50 NO, Ext-50 NO)
(scsi0) Downloading sequencer code... 415 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AHA-294X SCSI host adapter>
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder SCSI bus is being reset for host 0 channel 0.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
That's not the case for me. When I build it in to the kernel, the kernel comes tho the init of thje board then these lines repeats forever.
SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder SCSI bus is being reset for host 0 channel 0.
/Mathias
Quoted 37 lines · [email protected] wrote:
I am also having problems with this driver, but with different adapters and symptoms. depmod is reporting a lot of unresolved symbols for generic scsi and scsi cdrom. Compiling it into the kernel instead of as a module seems to bypass the problems.
stewart
Quoted 27 lines · Mathias Wiklander
Hi!
I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When ever I try to load it as a module or if I compile it in the kernel I get the folowing error messages. The last 4 messages repeats for ever. The problem is on 3 diffrent machines. Anyone who know what it can be and how to fix it.
/Eastbay
(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/19/0 (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Cables present (Int-50 NO, Ext-50 NO)
(scsi0) Downloading sequencer code... 415 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AHA-294X SCSI host adapter>
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder SCSI bus is being reset for host 0 channel 0.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Helps if we could get a kernel version.
Quoted 8 lines · Mathias Wiklander
Hi!
I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When ever I try to load it as a module or if I compile it in the kernel I get the folowing error messages. The last 4 messages repeats for ever. The problem is on 3 diffrent machines. Anyone who know what it can be and how to fix it.
Signature · 12 lines
=====================================================================
Mohammad A. Haque http://www.haque.net/
[email protected]
"Alcohol and calculus don't mix. Project Lead
Don't drink and derive." --Unknown http://wm.themes.org/
[email protected]
=====================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/Sorry I've forgot that. It is 2.4.0-test12
/Eastbay
Quoted 15 lines · Mohammad A. Haque
Helps if we could get a kernel version.
Quoted 8 lines · Mathias Wiklander
Hi!
I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When ever I try to load it as a module or if I compile it in the kernel I get the folowing error messages. The last 4 messages repeats for ever. The problem is on 3 diffrent machines. Anyone who know what it can be and how to fix it.
--
Quoted 8 lines
=====================================================================
Mohammad A. Haque http://www.haque.net/
[email protected]"Alcohol and calculus don't mix. Project Lead
Don't drink and derive." --Unknown http://wm.themes.org/
[email protected]
=====================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
ditto.
Quoted 17 lines · Mathias Wiklander
Sorry I've forgot that. It is 2.4.0-test12
/Eastbay
Quoted 13 lines · Mohammad A. Haque
Helps if we could get a kernel version.
Quoted 8 lines · Mathias Wiklander
Hi!
I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When ever I try to load it as a module or if I compile it in the kernel I get the folowing error messages. The last 4 messages repeats for ever. The problem is on 3 diffrent machines. Anyone who know what it can be and how to fix it.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Weird. The modules just give me unresolved symbol errors instead of the loop.
Quoted 3 lines · Mathias Wiklander
Sorry I've forgot that. It is 2.4.0-test12
Signature · 12 lines
=====================================================================
Mohammad A. Haque http://www.haque.net/
[email protected]
"Alcohol and calculus don't mix. Project Lead
Don't drink and derive." --Unknown http://wm.themes.org/
[email protected]
=====================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/It didn't help me with this patch. The aic7xxx driver (module or kernelcompiled) just put this 4 rows:
SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder SCSI bus is being reset for host 0 channel 0.
Anyone who knews what it means?
I need help.
/Eastbay
Quoted 18 lines
There was a SCSI
Makefilebug in test12 that caused those unresoved symbols. This patch from Bob Tracy fixes it.Doug Gilbert
drivers/scsi/Makefile.t12bt Tue Dec 12 22:46:27 2000 renamed from drivers/scsi/Makefile Tue Dec 12 10:49:32 2000 +1
-1@@ -30,7 +30,7 @@ CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM -obj-$(CONFIG_SCSI) += scsi_mod.o +obj-$(CONFIG_SCSI) += scsi_mod.o scsi_syms.o obj-$(CONFIG_A4000T_SCSI) += amiga7xx.o 53c7xx.o obj-$(CONFIG_A4091_SCSI) += amiga7xx.o 53c7xx.o
drivers/scsi/Makefile.t12bt Tue Dec 12 22:46:27 2000 line 128
Quoted 9 lines
drivers/scsi/Makefile.t12bt Tue Dec 12 22:46:27 2000 renamed from drivers/scsi/Makefile Tue Dec 12 10:49:32 2000 +1
-2@@ -122,8 +122,7 @@ scsi_mod-objs := scsi.o hosts.o scsi_ioctl.o constants.o \ scsicam.o scsi_proc.o scsi_error.o \ scsi_obsolete.o scsi_queue.o scsi_lib.o \ - scsi_merge.o scsi_dma.o scsi_scan.o \ - scsi_syms.o + scsi_merge.o scsi_dma.o scsi_scan.o sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o initio-objs := ini9100u.o i91uscsi.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/