2.4.0 compilation error
Subsystems (2)
Hi,
I just downloaded 2.4.0 and got this compilation error
gcc -D__KERNEL__ -I/usr/src/linux-2.4.0/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -march=i686 -DMODULE -DMODVERSIONS -include/usr/src/linux-2.4.0/include/linux/modversions.h -DEXPORT_SYMTAB -cip_conntrack_ftp.c
gcc -D__KERNEL__ -I/usr/src/linux-2.4.0/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -march=i686 -DMODULE -DMODVERSIONS -include/usr/src/linux-2.4.0/include/linux/modversions.h -c -o ip_nat_ftp.oip_nat_ftp.cip_nat_ftp.c: In function `help':
ip_nat_ftp.c:315: structure has no member named `nat' make[2]: *** [ip_nat_ftp.o] Error 1
make[2]: Leaving directory `/usr/src/linux-2.4.0/net/ipv4/netfilter' make[1]: *** [_modsubdir_ipv4/netfilter] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.0/net'
I have attached my .config file. I'm not currently subscribed to this mailing list so pls email me directly with any questions.
cheers,
csd
--
Christian Daudt [email protected]
Redback Networks Inc.
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_ISA=y
# CONFIG_SBUS is not setCONFIG_UID16=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not setCONFIG_M686FXSR=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_FXSR=yCONFIG_X86_XMM=y
# CONFIG_TOSHIBA is not setCONFIG_MICROCODE=mCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not setCONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#CONFIG_NET=y
# CONFIG_VISWS is not setCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#CONFIG_PCMCIA=yCONFIG_CARDBUS=y
# CONFIG_I82365 is not set
# CONFIG_TCIC is not setCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not setCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_PM=yCONFIG_ACPI=yCONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not setCONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#CONFIG_PNP=yCONFIG_ISAPNP=y
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not setCONFIG_PARIDE=mCONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_SIZE=4096
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_FILTER=yCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not setCONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_UNCLEAN=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_MIRROR is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not setCONFIG_IPV6=m
# CONFIG_IPV6_EUI64 is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#CONFIG_PHONE=mCONFIG_PHONE_IXJ=m
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not setCONFIG_BLK_DEV_RZ1000=yCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_IDEDMA_PCI is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not setCONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI support
#CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not setCONFIG_SCSI_SYM53C8XX=yCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not setCONFIG_EEPRO100=y
# CONFIG_EEPRO100_PM is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139TOO is not set
# CONFIG_RTL8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not setCONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_XIRTULIP is not setCONFIG_NET_PCMCIA_RADIO=yCONFIG_PCMCIA_RAYCS=y
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_PCMCIA_WAVELAN is not setCONFIG_PCMCIA_NETCARD=y
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not setCONFIG_MOUSE=yCONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
#
# Game port support
#
#
# Gameport joysticks
#
#
# Serial port support
#
#
# Serial port joysticks
#
#
# Parallel port joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not setCONFIG_DRM=yCONFIG_DRM_TDFX=y
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not setCONFIG_PCMCIA_SERIAL=y
#
# PCMCIA character device support
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_PCMCIA_SERIAL_CB is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
# CONFIG_VIDEO_PROC_FS is not set
#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# File systems
#
# CONFIG_QUOTA is not setCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_FAT_FS=mCONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not setCONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not setCONFIG_JFFS_FS_VERBOSE=0
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not setCONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not setCONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_CODA_FS=mCONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not setCONFIG_NFSD=y
# CONFIG_NFSD_V3 is not setCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=yCONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#CONFIG_FB=yCONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not setCONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not setCONFIG_FB_ATY=mCONFIG_FB_ATY128=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not setCONFIG_FBCON_CFB8=mCONFIG_FBCON_CFB16=mCONFIG_FBCON_CFB24=mCONFIG_FBCON_CFB32=m
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#CONFIG_SOUND=y
# CONFIG_SOUND_CMPCI is not setCONFIG_SOUND_EMU10K1=mCONFIG_SOUND_FUSION=mCONFIG_SOUND_CS4281=mCONFIG_SOUND_ES1370=mCONFIG_SOUND_ES1371=mCONFIG_SOUND_ESSSOLO1=mCONFIG_SOUND_MAESTRO=mCONFIG_SOUND_SONICVIBES=m
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not setCONFIG_SOUND_OSS=mCONFIG_SOUND_TRACEINIT=y
# CONFIG_SOUND_DMAP is not setCONFIG_SOUND_AD1816=mCONFIG_SOUND_SGALAXY=mCONFIG_SOUND_ADLIB=mCONFIG_SOUND_ACI_MIXER=mCONFIG_SOUND_CS4232=mCONFIG_SOUND_SSCAPE=mCONFIG_SOUND_GUS=m
# CONFIG_SOUND_GUS16 is not set
# CONFIG_SOUND_GUSMAX is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not setCONFIG_SOUND_SB=mCONFIG_SOUND_AWE32_SYNTH=m
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not setCONFIG_SOUND_YM3812=mCONFIG_SOUND_OPL3SA1=mCONFIG_SOUND_OPL3SA2=mCONFIG_SOUND_YMPCI=mCONFIG_SOUND_UART6850=mCONFIG_SOUND_AEDSP16=m
# CONFIG_SC6600 is not set
# CONFIG_AEDSP16_SBPRO is not set
#
# USB support
#CONFIG_USB=mCONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
#
# USB Controllers
#CONFIG_USB_UHCI=mCONFIG_USB_UHCI_ALT=mCONFIG_USB_OHCI=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
#
# USB Network adaptors
#
# CONFIG_USB_PLUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_NET1080 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB misc drivers
#
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
In message <[email protected]> you write:
Quoted 2 lines
I have attached my .config file. I'm not currently subscribed to this mailing list so pls email me directly with any questions.
Hi Christian,
Thanks for the bug report. Please try the enclosed patch,
which is pending for 2.4.1.
Cheers,
Rusty.
--
http://linux.conf.au The Linux conference Australia needed.
net/ipv4/netfilter/Config.in +10 -1
@@ -37,11 +37,20 @@ fi if [ "$CONFIG_IP_NF_CONNTRACK" != "n" ]; then - dep_tristate ' Full NAT' CONFIG_IP_NF_NAT $CONFIG_IP_NF_IPTABLES + dep_tristate ' Full NAT' CONFIG_IP_NF_NAT $CONFIG_IP_NF_IPTABLES $CONFIG_IP_NF_CONNTRACK if [ "$CONFIG_IP_NF_NAT" != "n" ]; then define_bool CONFIG_IP_NF_NAT_NEEDED y dep_tristate ' MASQUERADE target support' CONFIG_IP_NF_TARGET_MASQUERADE $CONFIG_IP_NF_NAT dep_tristate ' REDIRECT target support' CONFIG_IP_NF_TARGET_REDIRECT $CONFIG_IP_NF_NAT + # If they want FTP, set to $CONFIG_IP_NF_NAT (m or y), + # or $CONFIG_IP_NF_FTP (m or y), whichever is weaker. Argh. + if [ "$CONFIG_IP_NF_FTP" = "m" ]; then + define_tristate CONFIG_IP_NF_NAT_FTP m + else + if [ "$CONFIG_IP_NF_FTP" = "y" ]; then + define_tristate CONFIG_IP_NF_NAT_FTP $CONFIG_IP_NF_NAT + fi + fi fi fi
net/ipv4/netfilter/Makefile +1 -1
@@ -35,7 +35,7 @@ obj-$(CONFIG_IP_NF_FTP) += ip_conntrack_ftp.o # NAT helpers -obj-$(CONFIG_IP_NF_FTP) += ip_nat_ftp.o +obj-$(CONFIG_IP_NF_NAT_FTP) += ip_nat_ftp.o # generic IP tables obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/