Skip to contentSkip to conversation

Follow-up 2: Help: lvm 0.9.1_beta3 oops (can't get my data)

linux-lvm Joe Harvell 3 participants 7 messages Jan 28, 2001 – Jan 29, 2001

lore
Share & tools
lore
#0 lore raw

When I do a 'vgdisplay -vD w0', I don't run into any problems. Does this rule out the possibility of a vgcfgrestore helping?

I looked at the man pages for vcfgrestore, but I don't know which destination I should specify. Is it /dev/w0, or is it 'dev/hda8' and '/dev/hdb3'?

#1 lore raw

This problem you're experiencing sounds similar to what I hit after I have a machine hang while playing about with snapshots. Did you by chance do anything with snapshots on w0 volume?

I have machines from beta1, beta2 and beta3 with volumes that are stuck in the same state that you've run into that I haven't solved yet, granted I created the problem by messing with snapshots while heavy IO was involved.

Quoted 15 lines · Joe Harvell

Date: Sun, 28 Jan 2001 12:56:39 -0600
From: Joe Harvell <[email protected]>
Reply-To: [email protected]
To: [email protected]
Subject: [linux-lvm] Follow-up 2: Help: lvm 0.9.1_beta3 oops (can't get
my data)

When I do a 'vgdisplay -vD w0', I don't run into any problems. Does this rule out the possibility of a vgcfgrestore helping?

I looked at the man pages for vcfgrestore, but I don't know which destination I should specify. Is it /dev/w0, or is it 'dev/hda8' and '/dev/hdb3'?
_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm

#2 lore raw

Jay:

Thanks for responding. Yes, I have four snapshot LVs in this VG. However, I don't think there was any I/O at all when I created the snapshot LVs.

So what's up with the af_packet module symbols in the traceback?

Quoted 30 lines · Jay Weber

This problem you're experiencing sounds similar to what I hit after I have a machine hang while playing about with snapshots. Did you by chance do anything with snapshots on w0 volume?

I have machines from beta1, beta2 and beta3 with volumes that are stuck in the same state that you've run into that I haven't solved yet, granted I created the problem by messing with snapshots while heavy IO was involved.

Quoted 7 lines · Joe Harvell

Date: Sun, 28 Jan 2001 12:56:39 -0600
From: Joe Harvell <[email protected]>
Reply-To: [email protected]
To: [email protected]
Subject: [linux-lvm] Follow-up 2: Help: lvm 0.9.1_beta3 oops (can't get
my data)

Quoted 8 lines

When I do a 'vgdisplay -vD w0', I don't run into any problems. Does this rule out the possibility of a vgcfgrestore helping?

I looked at the man pages for vcfgrestore, but I don't know which destination I should specify. Is it /dev/w0, or is it 'dev/hda8' and '/dev/hdb3'?
_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm

_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm

#3 lore raw
In reply to Joe Harvell
Quoted 3 lines · Joe Harvell

When I do a 'vgdisplay -vD w0', I don't run into any problems. Does this rule out the possibility of a vgcfgrestore helping?

I looked at the man pages for vcfgrestore, but I don't know which destination I should specify. Is it /dev/w0, or is it 'dev/hda8' and '/dev/hdb3'?

I believe you want to do a 'vgcfgrestore -nw0 /dev/hda8; vgcfgrestore -nw0 /dev/hdb3'. Let me know if that fixes things. And remember, do *not* do a vgscan right after your vgcfgrestore because it will revert to the previous state. Simply run the vgcfgrestore command, and then try the 'vgchange -ay' to activate the volume group.

Let me know if that fixes things.

Regards,

Signature · 13 lines
AJ Lewis
Sistina Software Inc.                  Voice:  612-379-3951
1313 5th St SE, Suite 111              Fax:    612-379-3952
Minneapolis, MN 55414                  E-Mail: [email protected]
http://www.sistina.com

Current GPG fingerprint = 3B5F 6011 5216 76A5 2F6B  52A0 941E 1261 0029 2648
Get my key at: http://www.sistina.com/~lewis/gpgkey
 (Unfortunately, the PKS-type keyservers do not work with multiple sub-keys)

-----Begin Obligatory Humorous Quote----------------------------------------
Programming graphics in X is like finding sqrt(pi) using Roman numerals.
-----End Obligatory Humorous Quote------------------------------------------
#4 lore raw

Looks like it didn't work.

[root@btexi0c1 perfect]# vgcfgrestore -n w0 /dev/hda8
vgcfgrestore -- VGDA for "w0" successfully restored to physical volume "/dev/hda8"

[root@btexi0c1 perfect]# vgcfgrestore -n w0 /dev/hdb3
vgcfgrestore -- VGDA for "w0" successfully restored to physical volume "/dev/hdb3"

[root@btexi0c1 perfect]# vgchange -a y
Segmentation fault
[root@btexi0c1 perfect]# tail -30 /var/log/messages
JJan 28 20:15:20 btexi0c1 kernel: LVM version 0.9.1_beta3 by Heinz Mauelshagen (25/01/2001)

Jan 28 20:15:20 btexi0c1 kernel: lvm -- Module successfully initialized
Jan 28 20:15:35 btexi0c1 kernel: Unable to handle kernel NULL pointer dereference at virtual address 000001b0
Jan 28 20:15:35 btexi0c1 kernel:  printing eip:
Jan 28 20:15:35 btexi0c1 kernel: d88f8e71
Jan 28 20:15:35 btexi0c1 kernel: *pde = 00000000
Jan 28 20:15:35 btexi0c1 kernel: Oops: 0000
Jan 28 20:15:35 btexi0c1 kernel: CPU:    0
Jan 28 20:15:35 btexi0c1 kernel: EIP:    0010:[<d88f8e71>]
Jan 28 20:15:35 btexi0c1 kernel: EFLAGS: 00210246
Jan 28 20:15:35 btexi0c1 kernel: eax: 00000000   ebx: 00000021   ecx: 00000100   edx: 00000100
Jan 28 20:15:35 btexi0c1 kernel: esi: d0dc2000   edi: 00000300   ebp: 00000000   esp: ccaf9b5c
Jan 28 20:15:35 btexi0c1 kernel: ds: 0018   es: 0018   ss: 0018
Jan 28 20:15:35 btexi0c1 kernel: Process vgchange (pid: 31064, stackpage=ccaf9000)
Jan 28 20:15:35 btexi0c1 kernel: Stack: cd609000 d88f90cb d0dc2000 0000ffff 00000000 00000400 ce476200 00000330
Jan 28 20:15:35 btexi0c1 kernel:        00000000 00021c36 d88f77c4 d0dc2000 ce476200 d0dc2000 40239008 00000001
Jan 28 20:15:35 btexi0c1 kernel:        00000100 00000005 ccaf9bdc 00000000 ccaf9d84 d0dc2000 d88f6bda 00000000
Jan 28 20:15:35 btexi0c1 kernel: Call Trace: [<d88f90cb>] [<d88f77c4>] [<d88f6bda>] [af_packet:__insmod_af_packet_O/lib/modules/2.4.0/kernel/net/packet/af+0/96] [<d88f4707>] [do_anonymous_page+50/128] [iget4+194/208]
Jan 28 20:15:35 btexi0c1 kernel:        [update_process_times+32/128] [af_packet:__insmod_af_packet_O/lib/modules/2.4.0/kernel/net/packet/af+-137280/96] [af_packet:__insmod_af_packet_O/lib/modules/2.4.0/kernel/net/packet/af+-137132/96] [timer_bh+531/592] [cached_lookup+16/80] [path_walk+1906/2144] [ret_from_intr+0/32] [chrdev_open+54/64]
Jan 28 20:15:35 btexi0c1 kernel:        [dentry_open+192/336] [filp_open+77/96] [getname+91/160] [sys_ioctl+375/400] [system_call+51/56]
Jan 28 20:15:35 btexi0c1 kernel:
Jan 28 20:15:35 btexi0c1 kernel: Code: 8b 80 b0 01 00 00 5e c3 8d b4 26 00 00 00 00 55 31 d2 57 56
Quoted 31 lines · [email protected] wrote:
Quoted 3 lines · Joe Harvell

When I do a 'vgdisplay -vD w0', I don't run into any problems. Does this rule out the possibility of a vgcfgrestore helping?

I looked at the man pages for vcfgrestore, but I don't know which destination I should specify. Is it /dev/w0, or is it 'dev/hda8' and '/dev/hdb3'?

I believe you want to do a 'vgcfgrestore -nw0 /dev/hda8; vgcfgrestore -nw0 /dev/hdb3'. Let me know if that fixes things. And remember, do *not* do a vgscan right after your vgcfgrestore because it will revert to the previous state. Simply run the vgcfgrestore command, and then try the 'vgchange -ay' to activate the volume group.

Let me know if that fixes things.

Regards,
--
AJ Lewis

Sistina Software Inc.                  Voice:  612-379-3951
1313 5th St SE, Suite 111              Fax:    612-379-3952
Minneapolis, MN 55414                  E-Mail: [email protected]

http://www.sistina.com

Current GPG fingerprint = 3B5F 6011 5216 76A5 2F6B 52A0 941E 1261 0029 2648 Get my key at: http://www.sistina.com/~lewis/gpgkey
(Unfortunately, the PKS-type keyservers do not work with multiple sub-keys)

-----Begin Obligatory Humorous Quote---------------------------------------- Programming graphics in X is like finding sqrt(pi) using Roman numerals. -----End Obligatory Humorous Quote------------------------------------------

                                                  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Part 1.2Type: application/pgp-signature

#5 lore raw
Quoted 1 line · Joe Harvell

Looks like it didn't work.

Shoot! I'll look a this in more detail in the morning when I have access to my test setup.

Signature · 18 lines
AJ Lewis
Sistina Software Inc.                  Voice:  612-379-3951
1313 5th St SE, Suite 111              Fax:    612-379-3952
Minneapolis, MN 55414                  E-Mail: [email protected]
http://www.sistina.com

Current GPG fingerprint = 3B5F 6011 5216 76A5 2F6B  52A0 941E 1261 0029 2648
Get my key at: http://www.sistina.com/~lewis/gpgkey
 (Unfortunately, the PKS-type keyservers do not work with multiple sub-keys)

-----Begin Obligatory Humorous Quote----------------------------------------
THE LESSER-KNOWN PROGRAMMING LANGUAGES #16:
C- This language was named for the grade received by its creator when he
submitted it as a class project in a graduate programming class.  C- is
best described as a "low-level" programming language.  In fact, the
language generally requires more C- statements than machine-code statements
to execute a given task.  In this respect, it is very similar to COBOL.
-----End Obligatory Humorous Quote------------------------------------------
#6 lore raw
In reply to [email protected]
Quoted 10 lines · On Sun, Jan 28, 2001 at 08:06:49PM -0600, [email protected] wrote:
Quoted 3 lines · Joe Harvell

When I do a 'vgdisplay -vD w0', I don't run into any problems. Does this rule out the possibility of a vgcfgrestore helping?

I looked at the man pages for vcfgrestore, but I don't know which destination I should specify. Is it /dev/w0, or is it 'dev/hda8' and '/dev/hdb3'?

I believe you want to do a 'vgcfgrestore -nw0 /dev/hda8; vgcfgrestore -nw0 /dev/hdb3'. Let me know if that fixes things. And remember, do *not* do a vgscan right after your vgcfgrestore because it will revert to the previous state. Simply run the vgcfgrestore command, and then try the 'vgchange -ay' to activate the volume group.

I was told that this is incorrect information by Heinz and that you _should_ run vgscan after running vgcfgrestore because it brings the /etc/lvmtab and /etc/lvmtab.d/ in sync with the newly restored VGDA. Sorry about that. I was mixed up.

Signature · 18 lines
AJ Lewis
Sistina Software Inc.                  Voice:  612-379-3951
1313 5th St SE, Suite 111              Fax:    612-379-3952
Minneapolis, MN 55414                  E-Mail: [email protected]
http://www.sistina.com

Current GPG fingerprint = 3B5F 6011 5216 76A5 2F6B  52A0 941E 1261 0029 2648
Get my key at: http://www.sistina.com/~lewis/gpgkey
 (Unfortunately, the PKS-type keyservers do not work with multiple sub-keys)

-----Begin Obligatory Humorous Quote----------------------------------------
THE LESSER-KNOWN PROGRAMMING LANGUAGES #16:
C- This language was named for the grade received by its creator when he
submitted it as a class project in a graduate programming class.  C- is
best described as a "low-level" programming language.  In fact, the
language generally requires more C- statements than machine-code statements
to execute a given task.  In this respect, it is very similar to COBOL.
-----End Obligatory Humorous Quote------------------------------------------