More on the VIA KT133 chipset misbehaving in Linux
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bit
2) Detects a maximum of 64mb of ram, unless worked around by the "mem=" switch
3) The clock drifts slowly (more so under heavy load than light load), leaking time.
I think #2 is because e820h memory detection is not properly implemented on the KT133 chipset, or because of some silly BIOS bug that VIA has not addressed. I have no idea yet why #1 and #3 happen. If any gurus out there have any pointers on where I can look, and what I should prod, I know my way around with a compiler and editor ;)
--
www.kuro5hin.org -- technology and culture, from the trenches.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 4 lines · Dylan Griffiths
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bit
This happens to me about once a month on a BX chipset PII machine here, and on a KT133 chipset machine I have. I have to hit ctrl-alt-backspace to regain control of the console. I always assumed it was a bug in X, but it never caused me enough trouble to actually make me pursue it.
- Adrian
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines · Adrian Cox
Quoted 4 lines · Dylan Griffiths
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bit
Quoted 7 lines
This happens to me about once a month on a BX chipset PII machine here, and on a KT133 chipset machine I have. I have to hit ctrl-alt-backspace to regain control of the console. I always assumed it was a bug in X, but it never caused me enough trouble to actually make me pursue it.
- Adrian
turn off gpm.. fixes the mouse problem immediately. as in killall -9 gpm
before starting X.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 10 lines · safemode
Quoted 7 lines · Adrian Cox
Quoted 2 lines · Dylan Griffiths
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bit
This happens to me about once a month on a BX chipset PII machine here, and on a KT133 chipset machine I have. I have to hit ctrl-alt-backspace to regain control of the console. I always assumed it was a bug in X, but it never caused me enough trouble to actually make me pursue it.
turn off gpm.. fixes the mouse problem immediately. as in killall -9 gpm
before starting X.
I don't even have gpm installed on these machines, precisely for this reason. Whatever it is, it isn't gpm. But I also believe it isn't Via, and I'm not convinced that it's the kernel.
- Adrian Cox
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Adrian Cox
Quoted 4 lines · Dylan Griffiths
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bitThis happens to me about once a month on a BX chipset PII machine here, and on a KT133 chipset machine I have. I have to hit ctrl-alt-backspace to regain control of the console. I always assumed it was a bug in X, but it never caused me enough trouble to actually make me pursue it.
Useless datapoint:
I've experienced the same a few times on an old Pentium computer. Mouse pointer jumps to upper right corner, and locks hard. Intel chipset, not sure if it is FX or HX. Matrox Mill2 graphics card. Kernel is 2.2.16-ish on a modified RH6.1. XFree 3.3.6. gpm is running.
Signature · 5 lines
LarsG - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/
Datapoint
I have a chaintech 7AIA KT133-based TB motherboard. I use a USB mouse so I can't verify #1. However it(2.4.0-release) autodetects all my memory and I don't see a big enough clock drift even with 100% cpu utilization (don't know about high disk utilization though)
Are you sure you don't have OS/2 mode or memory hole enabled in bios? Not sure if it matters but it could... Also USB mouse support, make sure it's disabled in BIOS? Just guessing some things to look at.
-bc
Quoted 5 lines · Dylan Griffiths
Date: Mon, 29 Jan 2001 02:19:27 -0600
From: Dylan Griffiths <[email protected]>
To: Linux kernel <[email protected]>
Subject: More on the VIA KT133 chipset misbehaving in Linux
Quoted 9 lines
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bit
2) Detects a maximum of 64mb of ram, unless worked around by the "mem=" switch
3) The clock drifts slowly (more so under heavy load than light load), leaking time.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 10 lines · Adrian Cox
Quoted 4 lines · Dylan Griffiths
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bitThis happens to me about once a month on a BX chipset PII machine here, and on a KT133 chipset machine I have. I have to hit ctrl-alt-backspace to regain control of the console. I always assumed it was a bug in X, but it never caused me enough trouble to actually make me pursue it.
It happens to me also. In fact, I posted a message a week or two ago asking if anybody else had similar trouble and if anybody knew anything about it. I eventually just quit using the ps/2 mouse port and hooked my mouse up to the usb port to get it fixed. It irritated me a great deal though until I finally just switched it over to usb.
Matthew Fredrickson
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 8 lines · Dylan Griffiths
The VIA KT133 chipset exhibits the following bugs under Linux 2.2.17 and 2.4.0:
1) PS/2 mouse cursor randomly jumps to upper right hand corner of screen and locks for a bit
2) Detects a maximum of 64mb of ram, unless worked around by the "mem=" switch
3) The clock drifts slowly (more so under heavy load than light load), leaking time.
I know that I am late here, but I'm also using a via KT133 chipset with a Duron 600MHz and I'm using a kernel 2.2.18 here with the IDE patches and I'm not seeing anything of the above problems. Everything just works fine.
What are you using? I'm using an Asus A7V, with BIOS 1003 (I didn't upgrade it, since I'm terribly scarred of it going wrong and not being to boot again).
This is with kernel 2.2.18 (no signs of filesystem corruption also, and I have UDMA/66 enabled, but my system is not exactly stressed).
Quoted 1 line
I think #2 is because e820h memory detection
While I don't have problems with the Duron above, I do have a 486 here with 8MB of memory that I intend to use as a router for my local LAN, but 2.4.0 only recognizes 7MB, while 2.2.18 recognizes all 8MB. Under 2.4.0 (I haven't tried 2.4.1 yet), I used a mem=8M option and it worked fine, but I don't know if this is indeed safe or not (I'd guess that it would be, since the 2.2 kernels use all memory, but you never know).
[]s, Roger...
Signature · 7 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Rogerio Brito - [email protected] - http://www.ime.usp.br/~rbrito/ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/