Skip to contentSkip to conversation

A buglet with LVM-0.9.1

DISCUSSION J Sloan 3 participants 3 messages Feb 2, 2001 – Feb 3, 2001

lore
Share & tools
lore

J Sloan

author
#0 lore raw

Hi,

I discovered that lvm seems to have a problem
with compaq raid controllers - the partitions
don't have the normal names like /dev/sda1,
but instead names like /dev/ida/c0d0p1 -

lvm seems to works OK, but lvmdiskscan freaks...

lvmdiskscan works normally on other systems,
which have conventional disk controllers.

This is OK -
case: /tmp
(tty/dev/pts/1): bash: 623 > lvscan
lvscan -- ACTIVE "/dev/lxlvm/lvm1" [3.12 GB]
lvscan -- 1 logical volumes with 3.12 GB total in 1 volume group lvscan -- 1 active logical volumes

This is OK too -
case: /tmp
(tty/dev/pts/1): bash: 622 > df
Filesystem 1k-blocks Used Available Use% Mounted on

/dev/ida/c0d0p1        1007928    220124    736604  24% /
/dev/ida/c0d0p8        2015904    251196   1662304  14% /home
/dev/ida/c0d0p7        1007928       240    956488   1% /opt
/dev/ida/c0d0p9        4031856   1660664   2166380  44% /usr
/dev/ida/c0d0p3        2015920     61768   1851744   4% /var
/dev/lxlvm/lvm1        3225352   1888308   1173204  62% /disks/backup

But this is not in agreement:
case: /tmp
(tty/dev/pts/1): bash: 625 > lvmdiskscan -v
lvmdiskscan -- reading all disks / partitions (this may take a while...)

lvmdiskscan -- filling directory cache... lvmdiskscan -- walking through all found disks / partitions
lvmdiskscan -- /dev/ida/c0d0p1 [ 1000.06 MB] free whole disk
lvmdiskscan -- no valid disks / partitions found lvmdiskscan -- please check your disk device special files!

Hope this is of use -

jjs

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 4 lines

I discovered that lvm seems to have a problem with compaq raid controllers - the partitions don't have the normal names like /dev/sda1, but instead names like /dev/ida/c0d0p1 -

Quite a few controllers do this i2o, ida, dac960, .. . The user tools really need to cope with it. Its been true for a fair while and ended up necessary before /dev/ simply got too big

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to J Sloan
Quoted 5 lines · J Sloan

I discovered that lvm seems to have a problem with compaq raid controllers - the partitions don't have the normal names like /dev/sda1, but instead names like /dev/ida/c0d0p1 -

Quoted 7 lines

lvm seems to works OK, but lvmdiskscan freaks...

lvmdiskscan -- filling directory cache... lvmdiskscan -- walking through all found disks / partitions
lvmdiskscan -- /dev/ida/c0d0p1 [ 1000.06 MB] free whole disk
lvmdiskscan -- no valid disks / partitions found lvmdiskscan -- please check your disk device special files!

LVM _should_ take care of such devices as well, because there are several block devices which don't live directly in /dev, especially with devfs. According to "lvm_dir_cache.c", it should already check /dev/ida for disks.

If it doesn't work for you, this is a bug. It would be useful if you ran "lvmdiskscan -d" and "cat /proc/partitions" and sent the output to [email protected]

Cheers, Andreas

Signature · 7 lines
Andreas Dilger  \ "If a man ate a pound of pasta and a pound of antipasto,
                 \  would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/               -- Dogbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/