Skip to contentSkip to conversation

ACPI broken in 2.4.1

DISCUSSION Tony Hoyle 3 participants 3 messages Feb 4, 2001

lore
Share & tools
lore

Tony Hoyle

author
#0 lore raw

In my wifes' machine 2.4.1 (both vanilla and -ac2) enabling ACPI causes the machine to run so slowly it's unusable. On my machine it's OK. 2.4.0 worked fine, so something has changed between 2.4.0 and 2.4.1 that broke it. I couldn't find anything in dmesg that looked any different, though. However since that machine has never successfully booted with ACPI on the kern.log hasn't been written so it's unlikely I'd find anything.

Tony

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw

I waited out the boot so I could login and experiment, but it was painfully slow.

Compiling with just APM in and no ACPI, results in a correctly-running machine with rh7 gcc-2.96-69.

I got lucky this time that with APM worked, else I'd be stuck with slowly fscking, since this last boot I had to fsck two of my partitions (maximum mount count exceeded...) I don't even want to know how long it'd take to fsck my almost 60GB worth of disks on this machine... If that were the case, I guess I'd be better off fscking with 2.4.0 and then coming back in... ouch.

-bc

Quoted 5 lines · Tony Hoyle

Date: Sun, 04 Feb 2001 15:26:04 +0000
From: Tony Hoyle <[email protected]>
To: [email protected]
Subject: ACPI broken in 2.4.1

Quoted 8 lines

In my wifes' machine 2.4.1 (both vanilla and -ac2) enabling ACPI causes the machine to run so slowly it's unusable. On my machine it's OK. 2.4.0 worked fine, so something has changed between 2.4.0 and 2.4.1 that broke it. I couldn't find anything in dmesg that looked any different, though. However since that machine has never successfully booted with ACPI on the kern.log hasn't been written so it's unlikely I'd find anything.

Tony

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 5 lines

I waited out the boot so I could login and experiment, but it was painfully slow.

Compiling with just APM in and no ACPI, results in a correctly-running machine with rh7 gcc-2.96-69.

Lots of people are seeing this. Stick to APM for now until the acpi folks fix it.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/