Skip to contentSkip to conversation

rawio usage

DISCUSSION Douglas Gilbert 1 participant 1 message Feb 6, 2001

lore
Share & tools
lore
#0 lore raw

Content-Type: multipart/mixed;
boundary="------------D4869FCB9AEAF2CC69FB9DEF"

This is a multi-part message in MIME format.
--------------D4869FCB9AEAF2CC69FB9DEF
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Quoted 7 lines · Mayank Vasa

I am quite new to rawio and am experimenting with with its usage. My test environment is Redhat 7.0, kernel version 2.2.16-22 having an external fibre channel drive having 2 disks (/dev/sda1 and /dev/sdb1)

All I am trying to do is to write and read to & from the disk using a raw device. Externally I did a "raw /dev/raw/raw1 /dev/sdb1" and then I wrote a small program to do the read/write.

[snip]

Raw devices need to meet the alignment requirements of the device they are bound to; in the case of most disk this will be 512 bytes. You need to take this into account for:
- the buffer you give to the read() and write() calls
- the 'size' given to read() and write() should be a multiple of 512
- the SEEK_SET 'offset' given to lseek() should be a multiple of 512. Note you have a 2 G limit here. You can use _llseek() to get around this.

A small program that just reads from a raw device (or the corresponding block device which should give the same result) attached.

If you were binding a raw device to a cdrom device then the BLKSIZE would need to be 2048 bytes (in most cases).

Doug Gilbert
--------------D4869FCB9AEAF2CC69FB9DEF
Content-Type: text/plain; charset=us-ascii;
name="my_rawio_ex.c"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="my_rawio_ex.c"

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <string.h>
#include <stdlib.h>

#define BLKSIZE 512
#define BLKS2READ 1

int main(int argc, char *argv[])

{
    int fd, k;
    unsigned char buff[BLKSIZE * (BLKS2READ + 1)]; // allow extra for alignment
    unsigned char * arbp;			   // aligned read buffer ptr
    long block_addr = 0;

    arbp = (char *)(((unsigned long)buff + (BLKSIZE - 1)) & (~(BLKSIZE - 1)));

    fd = open(argv[1], O_RDONLY);
    if (fd < 0) {
        perror("open");
        exit (1);
    }
    if ((lseek(fd, block_addr * BLKSIZE, SEEK_SET)) < 0){
        perror("lseek");	// problem if 2nd arg > 2G
        exit (1);
    }
    if ((read(fd, arbp, BLKSIZE * BLKS2READ)) < 0) {
        perror("read");
        exit(1);
    }

    printf("First 16 bytes of the readbuf (in hex) are:\n   ");
    for (k = 0; k < 16; ++k)
	printf("%x ", (int)arbp[k]);
    printf("\n");
    close(fd);
    return 0;
}

--------------D4869FCB9AEAF2CC69FB9DEF--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/