Skip to contentSkip to conversation

(2.4.1-ac15) Wont set using_dma = 1 with hdparm

DISCUSSION Jason Straight 1 participant 1 message Feb 16, 2001

lore
Share & tools
lore
#0 lore raw

With 2.2.18 I can set using_dma = 1 with hdparm on my Dell Inspiron 8000, I cannot with 2.4.1-ac15, so my HD works about 1/3 the speed with 2.4.1.

[root@jkd junfan]# hdparm -I /dev/hda

/dev/hda:

Model=IHATHC_IKD32AB2- 0 , FwRev=000E0A2D,
SerialNo= 11S59T
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=36477, SectSize=579, ECCbytes=4 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=?0? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39070080 IORDY=yes, tPIO={min:400,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3
*udma4

/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)

hdparm v3.9

Signature · 1 line
Jason Straight