Skip to contentSkip to conversation

weird /proc/ide/hdx/settings

DISCUSSION David Balazic 2 participants 3 messages Feb 23, 2001 – Feb 26, 2001

lore
Share & tools
lore
#0 lore raw

Running kernel 2.4.2 :

cat /proc/ide/hdc/settings

name                    value           min             max             mode
----                    -----           ---             ---             ----
bios_cyl                89355           0               65535           rw
bios_head               16              0               255             rw
bios_sect               63              0               63              rw
breada_readahead        4               0               127             rw
bswap                   0               0               1               r
current_speed           69              0               69              rw
file_readahead          0               0               2097151         rw
ide_scsi                0               0               1               rw
init_speed              12              0               69              rw
io_32bit                1               0               3               rw
keepsettings            0               0               1               rw
lun                     0               0               7               rw
max_kb_per_request      128             1               127             rw
multcount               0               0               8               rw
nice1                   1               0               1               rw
nowerr                  0               0               1               rw
number                  2               0               3               rw
pio_mode                write-only      0               255             w
slow                    0               0               1               rw
unmaskirq               1               0               1               rw

using_dma
--------------------%X---------------

max_kb_per_request has value 128 , but max is 127 !?

max for multcount is 8 , but my drive supports 16 sectors. ( see hdparm output below ) If I set multcount to 8 sectors ( hdparm -m 8 /dev/hdc )
then /proc/ide/hdc/settings will show :
multcount 4 0 8 rw

The values are divided by 2. Why ?

hdparm -i /dev/hdc :

/dev/hdc:

Model=IBM-DTLA-307045, FwRev=TX6OA60A, SerialNo=YMEYMML9342 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=90069840 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5

IDE interface is VIA xxx686b ( ATA-100 )
IDE driver is VIA IDE v4.3

Signature · 4 lines
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
#1 lore raw

Zero is a counting number. 0->255 == 1->256.

Quoted 52 lines · David Balazic

Running kernel 2.4.2 :

cat /proc/ide/hdc/settings

name                    value           min             max             mode
----                    -----           ---             ---             ----
bios_cyl                89355           0               65535           rw
bios_head               16              0               255             rw
bios_sect               63              0               63              rw
breada_readahead        4               0               127             rw
bswap                   0               0               1               r
current_speed           69              0               69              rw
file_readahead          0               0               2097151         rw
ide_scsi                0               0               1               rw
init_speed              12              0               69              rw
io_32bit                1               0               3               rw
keepsettings            0               0               1               rw
lun                     0               0               7               rw
max_kb_per_request      128             1               127             rw
multcount               0               0               8               rw
nice1                   1               0               1               rw
nowerr                  0               0               1               rw
number                  2               0               3               rw
pio_mode                write-only      0               255             w
slow                    0               0               1               rw
unmaskirq               1               0               1               rw

using_dma
--------------------%X---------------

max_kb_per_request has value 128 , but max is 127 !?

max for multcount is 8 , but my drive supports 16 sectors. ( see hdparm output below ) If I set multcount to 8 sectors ( hdparm -m 8 /dev/hdc )
then /proc/ide/hdc/settings will show :
multcount 4 0 8 rw

The values are divided by 2. Why ?

hdparm -i /dev/hdc :

/dev/hdc:

Model=IBM-DTLA-307045, FwRev=TX6OA60A, SerialNo=YMEYMML9342 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=90069840 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5

Quoted 14 lines

IDE interface is VIA xxx686b ( ATA-100 )
IDE driver is VIA IDE v4.3

Signature · 9 lines
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------

ASL, Inc.                                     Toll free: 1-877-ASL-3535
1757 Houret Court                             Fax: 1-408-941-2071
Milpitas, CA 95035                            Web: www.aslab.com
#2 lore raw
Quoted 2 lines · Andre Hedrick

Zero is a counting number. 0->255 == 1->256.

I don't understand.
This doesn't explain (value) is bigger than (max).

Are you saying that (value) is counted from 1 , while (max) ( and min too ? ) is counted from 0 ?

david

Quoted 76 lines · David Balazic
Quoted 56 lines

Running kernel 2.4.2 :

cat /proc/ide/hdc/settings

name                    value           min             max             mode
----                    -----           ---             ---             ----
bios_cyl                89355           0               65535           rw
bios_head               16              0               255             rw
bios_sect               63              0               63              rw
breada_readahead        4               0               127             rw
bswap                   0               0               1               r
current_speed           69              0               69              rw
file_readahead          0               0               2097151         rw
ide_scsi                0               0               1               rw
init_speed              12              0               69              rw
io_32bit                1               0               3               rw
keepsettings            0               0               1               rw
lun                     0               0               7               rw
max_kb_per_request      128             1               127             rw
multcount               0               0               8               rw
nice1                   1               0               1               rw
nowerr                  0               0               1               rw
number                  2               0               3               rw
pio_mode                write-only      0               255             w
slow                    0               0               1               rw
unmaskirq               1               0               1               rw

using_dma
--------------------%X---------------

max_kb_per_request has value 128 , but max is 127 !?

max for multcount is 8 , but my drive supports 16 sectors. ( see hdparm output below ) If I set multcount to 8 sectors ( hdparm -m 8 /dev/hdc )
then /proc/ide/hdc/settings will show :
multcount 4 0 8 rw

The values are divided by 2. Why ?

hdparm -i /dev/hdc :

/dev/hdc:

Model=IBM-DTLA-307045, FwRev=TX6OA60A, SerialNo=YMEYMML9342 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=90069840 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5

IDE interface is VIA xxx686b ( ATA-100 )
IDE driver is VIA IDE v4.3

Quoted 11 lines

--
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------

ASL, Inc.                                     Toll free: 1-877-ASL-3535
1757 Houret Court                             Fax: 1-408-941-2071
Milpitas, CA 95035                            Web: www.aslab.com
Signature · 4 lines
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -