reiserfs problem
When 2.4.1 was released I reported a kernel oops with reiserfs, I got no response.
The problem still persists with kernel 2.4.2. I am using mkreiserfs v2 (3.6.25) and tried on different ide hards disks as well as on a software raid 0 partition, I also tried with and without CONFIG_REISERFS_CHECK defined, the oops always happens.
My system is a dual pentium 500, 256M memory, IDE:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) The system has been running flawlessly with 2.2 kernels for months.
This is how I caused the first oops:
Created 2Gig reiserfs partition on /dev/md0 (raid0)
mount /dev/md0 /mnt/md0
Mount took 3-5 seconds
cp -ax / /mnt/md0
Only the /bin directory (not the contents!) was copied and then cp core dumped. syslog reports an oops, however the system is still usable but mount/umount/sync is not possible on any filesystems.
kernel oops report:
Quoted 1 line
Quoted 1 line
EIP;
d2cf9db8<[reiserfs]create_virtual_node+298/490> <=====
Trace; d2cfc053 <[reiserfs]dc_check_balance_leaf+53/150> Trace; d2cfc975 <[reiserfs]fix_nodes+115/450> Trace; d2d062ac <[reiserfs]reiserfs_cut_from_item+1fc/430> Trace; d2d152f0 <[reiserfs]reiserfs_mounted_fs_count+0/4> Trace; d2d0686e <[reiserfs]reiserfs_do_truncate+32e/470> Trace; d2d18044 <.bss.end+1165/???
Trace; d2cf8567 <[reiserfs]reiserfs_truncate_file+b7/1a0> Trace; d2d0fa24 <[reiserfs].rodata.start+11e4/678e> Trace; d2d141af <[reiserfs].rodata.start+596f/678e> Trace; d2cf9382 <[reiserfs]reiserfs_file_release+1d2/380> Trace; d2cf94cf <[reiserfs]reiserfs_file_release+31f/380> Trace; d2d0fb8c <[reiserfs].rodata.start+134c/678e> Trace; d2d141af <[reiserfs].rodata.start+596f/678e> Trace; c0128230 <file_read_actor+0/60>
Trace; c0135e47 <fput+37/e0>
Trace; c0134d56 <filp_close+a6/b0>
Trace; c0134dbb <sys_close+5b/70>
Trace; c0109127 <system_call+33/38>
Code; d2cf9db8 <[reiserfs]create_virtual_node+298/490> 00000000 <_EIP>:
Code; d2cf9db8 <[reiserfs]create_virtual_node+298/490> <=====
0: 8b 40 14 mov 0x14(%eax),%eax <=====
Code; d2cf9dbb <[reiserfs]create_virtual_node+29b/490>
3: ff d0 call *%eax
Code; d2cf9dbd <[reiserfs]create_virtual_node+29d/490>
5: 89 c2 mov %eax,%edx
Code; d2cf9dbf <[reiserfs]create_virtual_node+29f/490>
7: 8b 06 mov (%esi),%eax
Code; d2cf9dc1 <[reiserfs]create_virtual_node+2a1/490>
9: 83 c4 10 add $0x10,%esp
Code; d2cf9dc4 <[reiserfs]create_virtual_node+2a4/490>
c: 01 c2 add %eax,%edx
Code; d2cf9dc6 <[reiserfs]create_virtual_node+2a6/490>
e: 89 16 mov %edx,(%esi)
Code; d2cf9dc8 <[reiserfs]create_virtual_node+2a8/490>
10: 8b 83 8c 01 00 00 mov 0x18c(%ebx),%eax
Signature · 4 lines
Patrick Mackinlay [email protected] ICQ: 59277981 tel: +44 7050699851 fax: +44 7050699852 SpaceSurfer Limited http://www.spacesurfer.com/
Quoted 2 lines · On Friday, February 23, 2001 05:03:40 PM +0000 Patrick Mackinlay…
When 2.4.1 was released I reported a kernel oops with reiserfs, I got no response.
Hmmm, don't seem to have any other reiserfs mail from you. Sorry I missed it.
[ ...]
Quoted 3 lines
kernel oops report:
Quoted 1 line
Quoted 1 line
EIP;
d2cf9db8<[reiserfs]create_virtual_node+298/490> <=====
We've had a half dozen or so reports so far of this, almost every time it has been resolved as a compiler issue, usually an unpatched gcc 2.96. One user was using 2.95.3, but did not report back if switching to 2.95.2 or egcs fixed the oops.
Anyway, which compiler did you use to compile the kernel?
-chris
Quoted 15 lines · Chris Mason
Quoted 2 lines · On Friday, February 23, 2001 05:03:40 PM +0000 Patrick Mackinlay…
When 2.4.1 was released I reported a kernel oops with reiserfs, I got no response.
Hmmm, don't seem to have any other reiserfs mail from you. Sorry I missed it.
[ ...]
Quoted 3 lines
kernel oops report:
Quoted 1 line
Quoted 1 line
EIP;
d2cf9db8<[reiserfs]create_virtual_node+298/490> <=====
Quoted 8 lines
We've had a half dozen or so reports so far of this, almost every time it has been resolved as a compiler issue, usually an unpatched gcc 2.96. One user was using 2.95.3, but did not report back if switching to 2.95.2 or egcs fixed the oops.
Anyway, which compiler did you use to compile the kernel?
-chris
I didn't want to join the kernel mailing list (too much traffic) so I sent it to the email address suggested on the reiserfs home page. I guess it didn't get through.
It seems I am in fact using a buggy compiler (damn RedHat 7, forgot I had upgraded on this machine) I will try re-compiling with another compiler and let you know if I still have problems.
regards,
Patrick
Signature · 4 lines
Patrick Mackinlay [email protected] ICQ: 59277981 tel: +44 7050699851 fax: +44 7050699852 SpaceSurfer Limited http://www.spacesurfer.com/