Skip to contentSkip to conversation

Linux Socket Filter sudden CPU use increase

DISCUSSION Eduardo Maga�a Lizarrondo 1 participant 1 message Feb 27, 2001

lore
Share & tools
lore
#0 lore raw

I have been testing Linux Socket Filters (LSF) these weeks (kernels 2.2.12,
2.2.14, 2.2.18, 2.4.1) with libpcap (0.4 - 0.6.2) and I have observed something curious. I make a program that increase number of simultaneous LSF filters (5, 10, 15..) and when this number is between 15 and 50, suddenly
CPU consumed by kernel increases suddenly. Any idea?
(you can see a figure of CPU vs. number of LSF filter in
http://www.tlm.unavarra.es/~eduardo/varios/lsf.gif)

I do not see anything stranger. Only, using Linux Trace Toolkit with some
modifications when there are few filters, I observe that of timer Bottom Half
follows IRQ 0. And when there are more filters, IRQ 0 takes place when the
network Bottom Half is taking place, so the timer Bottom Half is delayed to
the end of the network Bottom Half. Can it be related?

To measure kernel CPU I have used the trick of running another CPU with low
priority. According to the time this second process is delayed an aproximate
%CPU is obtained.

I do not understand what is happening. Any help would be very useful.

Eduardo

Signature · 2 lines
Eduardo Magaña Lizarrondo
http://www.tlm.unavarra.es/~eduardo