opl3sa2 won't load in kernel 2.4.2
Hi,
I cannot find an answer to my problem. Sound was always working ok in 2.2.x and 2.4.1 kernels. But now the opl3sa2 module won't load anymore. First I got the messages:
opl3sa2: No cards found
opl3sa2: 0 PnP card(s) found.
The I added isapnp=0 to the options line in /etc/modules.conf and then I get:
opl3sa2: Control I/O port 0x0 not free
^^^
It seems that the io address is not correctly passed to the module?!
The relevant lines from /etc/modules.conf are:
alias sound-slot-0 opl3sa2
alias sound-service-0-0 opl3sa2
alias midi opl3
options opl3 io=0x388
options opl3sa2 mss_io=0x530 irq=5 dma=1 dma2=0 mpu_io=0x330 io=0x370 isapnp=0
Any idea???
Answer please with a CC to [email protected]
Regards,
Rob
_____________________________________________________________
Rob W. van Swol
National Aerospace Laboratory NLR Tel. +31 527 248252 P.O. Box 153 Fax +31 527 248210 8300 AD Emmeloord E-Mail [email protected] The Netherlands http://www.neonet.nl/
Quoted 10 lines · Rob W. van Swol
Hi,
I cannot find an answer to my problem. Sound was always working ok in 2.2.x and 2.4.1 kernels. But now the opl3sa2 module won't load anymore. First I got the messages:
opl3sa2: No cards found
opl3sa2: 0 PnP card(s) found.
Quoted 7 lines
The I added isapnp=0 to the options line in
/etc/modules.confand then I get:opl3sa2: Control I/O port
0x0not free^^^It seems that the io address is not correctly passed to the module?!
I got the same problem and i think there is an error in opl3sa2.c ? I thinnk the problem is in the init_opl3sa2() function, in this line :
if(!isapnp && io == -1 ) {
If you don't use/have IsaPNP then the cfg[card] struct is not/never initialized ... ?
I made a quick patch that correct this test ... but I think we should find a better way to choose between initializing the cfg[card] struct using opl3sa2_isapnp_probe or using the user suplied module parameters ... no ?
Signature · 2 lines
Jérôme Augé echo [email protected] | tr khplmndvqyc nirtelacufj
opl3sa2.c renamed from opl3sa2.c.orig +5 -7
@@ -914,13 +914,8 @@#endif /* If a user wants an I/O then assume they meant it */ -if (!isapnp && io ==-1 ) { -if (io ==-1 || irq ==-1 || dma ==-1 || - dma2 ==-1 || mss_io ==-1 ) { -printk (KERN_ERR -"opl3sa2: io, mss_io, irq, dma, and dma2 must be set\n" ); -return -EINVAL ; - } +if ((io !=-1 ) && (irq !=-1 ) && (dma !=-1 ) && + (dma2 !=-1 ) && (mss_io !=-1 ) && (mpu_io !=-1 )) {/* * Our own config:
@@ -948,6 +943,9 @@opl3sa2_clear_slots (&cfg[card]);opl3sa2_clear_slots (&cfg_mss[card]);opl3sa2_clear_slots (&cfg_mpu[card]); + }else { +printk (KERN_ERR "opl3sa2: io, mss_io, irq, dma, and dma2 must be set\n" ); +return -EINVAL ; } if(!probe_opl3sa2(&cfg[card], card) ||