2.4.2 + aic7xxx still broken
Quoted 3 lines · Doug Ledford
Either one should work. Try it with the
UP_IOAPICsupport enabled and see if that helps. If it doesn't, then I would try Justin's driver and see if it works.
Thanks, the machine now boots.
I'm using 2.4.3-pre3 + linux-aic7xxx-6.1.7 (UP on SMP board) with the following APIC support enabled:
CONFIG_X86_GOOD_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=y
-Igor Mozetic