2.4.x: Netfinity 4500 SMP freezes without any trace
Hello,
our Netfinity 4500 SMP seems to be running ok on the 2.2.x series, but on the 2.4-x series it freezes
after sometime. A real nice freeze - The Console looks like it is running, but its completely dead.
The system freezes when its idle after a day. Some how I suspected
the Adaptec
SCSI controller. I wrote 16G, 8G and 4G files on the disc - The Netfinity had
runtimes from a half hour to about two hours.
In our first Configuration we included the SYM53C8XX SCSI support (by accident)
the runtime was a half hour.
I tested 2.4.2 and 2.4.3pre4 - No difference.
I watched the SCSI debug messages - No hint.
With or without IBM SCSI raid - No diference.
Anyway our Configuration:
lspci:
-----
00:00.0 Host bridge: Relience Computer CNB20HE (rev 05) 00:00.1 Host bridge: Relience Computer CNB20HE (rev 05) 00:01.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04) 00:02.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (rev 44)
00:0f.0 ISA bridge: Relience Computer: Unknown device 0200 (rev 4f) 00:0f.1 IDE interface: Relience Computer: Unknown device 0211 00:0f.2 USB Controller: Relience Computer: Unknown device 0220 (rev 04) 01:03.0 SCSI storage controller: Adaptec 7899P (rev 01) 01:03.1 SCSI storage controller: Adaptec 7899P (rev 01)
dmesg:
------
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
CPU#1 (phys ID: 0) waiting for CALLOUT
Startup point 1.
Waiting for send to finish...
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1854.66 BogoMIPS
Stack at about cfff5fbc
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
OK.
CPU1: Intel Pentium III (Coppermine) stepping 03
CPU has booted.
Before bogomips.
Total of 2 processors activated (3709.33 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 14 ... ok.
BIOS bug, IO-APIC#1 ID is 15 in the MPC table!...
... fixing up to 15. (tell your hw vendor)
...changing IO-APIC physical APIC ID to 15 ... ok. Synchronizing Arb IDs.
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-0, 14-5, 15-0, 15-1, 15-2, 15-3, 15-4, 15-5,
15-6, 15-7, 15-8, 15-9, 15-14, 15-15 not connected. ..TIMER: vector=49 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works.
number of MP IRQ sources: 19.
number of IO-APIC #14 registers: 16.
number of IO-APIC #15 registers: 16.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31 01 003 03 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 003 03 1 1 0 1 0 1 1 69 0a 003 03 0 0 0 0 0 1 1 71 0b 003 03 0 0 0 0 0 1 1 79 0c 003 03 0 0 0 0 0 1 1 81 0d 003 03 0 0 0 0 0 1 1 89 0e 003 03 0 0 0 0 0 1 1 91 0f 003 03 0 0 0 0 0 1 1 99
IO APIC #15......
.... register #00: 0F000000
....... : physical APIC id: 0F
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 0A000000
....... : arbitration: 0A
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 003 03 1 1 0 1 0 1 1 A1 0b 003 03 1 1 0 1 0 1 1 A9 0c 003 03 1 1 0 1 0 1 1 B1 0d 003 03 1 1 0 1 0 1 1 B9 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 10
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ27 -> 11
IRQ28 -> 12
IRQ29 -> 13
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 930.2699 MHz.
..... host bus clock speed is 132.8955 MHz.
cpu: 0, clocks: 1328955, slice: 442985 CPU0<T0:1328944,T1:885952,D:7,S:442985,C:1328955>
cpu: 1, clocks: 1328955, slice: 442985 CPU1<T0:1328944,T1:442960,D:14,S:442985,C:1328955> checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfd2fc, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 01PCI->APIC IRQ transform: (B0,I2,P0) -> 27PCI->APIC IRQ transform: (B0,I15,P0) -> 9PCI->APIC IRQ transform: (B1,I3,P0) -> 28PCI->APIC IRQ transform: (B1,I3,P1) -> 29
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169525kB/56508kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79 ServerWorks OSB4: chipset revision 0
ServerWorks OSB4: not 100% native mode: will probe irqs later
hda: CRN-8241B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Serial driver version 5.05 (2000-12-13) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550Apcnet32_probe_pci: found device 0x001022.0x002000
ioaddr=0x002000 resource_flags=0x000101
eth0: PCnet/FAST III 79C975 at 0x2000, 00 02 55 58 42 40
pcnet32: pcnet32_private lp=cff3e000 lp_dma_addr=0xff3e000 assigned IRQ 27.
pcnet32.c:v1.25kf 26.9.1999 [email protected]
SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
Vendor: IBM-PSG Model: DDYS-T36950M M Rev: S9AA
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0 (scsi1:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: IBM Model: YGLv3 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sg1 at scsi1, channel 0, id 8, lun 0, type 3 scsi1:0:0:0: Tagged Queuing enabled. Depth 8
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 192k freed
config:
#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_ISA=y
# CONFIG_SBUS is not setCONFIG_UID16=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not setCONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_SMP=yCONFIG_HAVE_DEC_LOCK=y
#
# General setup
#CONFIG_NET=y
# CONFIG_VISWS is not setCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not setCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ACPI is not set
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not setCONFIG_UNIX=yCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not setCONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not setCONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_IDEDMA_PCI is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
#
# SCSI support
#CONFIG_SCSI=yCONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=yCONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_PROC_STATS=yCONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not setCONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_EEPRO100_PM is not set
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139TOO is not set
# CONFIG_RTL8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=yCONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not setCONFIG_MOUSE=yCONFIG_PSMOUSE=yCONFIG_82C710_MOUSE=y
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not setCONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not setCONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not setCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="cp437"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
[root@www src]# cat config.24
#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_ISA=y
# CONFIG_SBUS is not setCONFIG_UID16=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not setCONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_SMP=yCONFIG_HAVE_DEC_LOCK=y
#
# General setup
#CONFIG_NET=y
# CONFIG_VISWS is not setCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not setCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ACPI is not set
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not setCONFIG_UNIX=yCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not setCONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not setCONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_IDEDMA_PCI is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
#
# SCSI support
#CONFIG_SCSI=yCONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=yCONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_PROC_STATS=yCONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not setCONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_EEPRO100_PM is not set
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139TOO is not set
# CONFIG_RTL8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=yCONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not setCONFIG_MOUSE=yCONFIG_PSMOUSE=yCONFIG_82C710_MOUSE=y
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not setCONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not setCONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not setCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="cp437"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
Regards
Hartmut
--
Hartmut Holz
zweitwerk GmbH - ein Unternehmen der Media Bild Imaging AG Stahltwiete 16
22761 Hamburg
Tel: 040 / 853756-14
Fax: 040 / 853756-50
email: [email protected]
Reboot with 'nmi_watchdog=0'. That will "fix" it for now. Still chasing this. I'll announce when I find out root cause.
Tim
Quoted 1,519 lines · Hartmut Holz
Hello,
our Netfinity 4500 SMP seems to be running ok on the 2.2.x series, but on the 2.4-x series it freezes
after sometime. A real nice freeze - The Console looks like it is running, but its completely dead.The system freezes when its idle after a day. Some how I suspected
the Adaptec
SCSI controller. I wrote 16G, 8G and 4G files on the disc - The Netfinity had
runtimes from a half hour to about two hours.In our first Configuration we included the SYM53C8XX SCSI support (by accident)
the runtime was a half hour.I tested 2.4.2 and 2.4.3pre4 - No difference.
I watched the SCSI debug messages - No hint.
With or without IBM SCSI raid - No diference.
Anyway our Configuration:
lspci:
-----
00:00.0 Host bridge: Relience Computer CNB20HE (rev 05) 00:00.1 Host bridge: Relience Computer CNB20HE (rev 05) 00:01.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04) 00:02.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (rev 44)
00:0f.0 ISA bridge: Relience Computer: Unknown device 0200 (rev 4f) 00:0f.1 IDE interface: Relience Computer: Unknown device 0211 00:0f.2 USB Controller: Relience Computer: Unknown device 0220 (rev 04) 01:03.0 SCSI storage controller: Adaptec 7899P (rev 01) 01:03.1 SCSI storage controller: Adaptec 7899P (rev 01)dmesg:
------
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
Afterapic_write.
Initializing CPU#1
CPU#1 (phys ID: 0) waiting for CALLOUT
Startup point 1.
Waiting for send to finish...
+Sending STARTUP #2.
Afterapic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, beforesetup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1854.66 BogoMIPS
Stack at aboutcfff5fbc
CPU: Before vendor init, caps:0383fbff00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps:0383fbff00000000 00000000 00000000
CPU: After generic, caps:0383fbff00000000 00000000 00000000
CPU: Common caps:0383fbff00000000 00000000 00000000
OK.
CPU1: Intel Pentium III (Coppermine) stepping 03
CPU has booted.
Before bogomips.
Total of 2 processors activated (3709.33 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 14 ... ok.
BIOS bug, IO-APIC#1 ID is 15 in the MPC table!...
... fixing up to 15. (tell your hw vendor)
...changing IO-APIC physical APIC ID to 15 ... ok. Synchronizing Arb IDs.
initIO_APICIRQs
IO-APIC (apicid-pin) 14-0, 14-5, 15-0, 15-1, 15-2, 15-3, 15-4, 15-5,
15-6, 15-7, 15-8, 15-9, 15-14, 15-15 not connected. ..TIMER: vector=49 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works.
number of MP IRQ sources: 19.
number of IO-APIC #14 registers: 16.
number of IO-APIC #15 registers: 16.
testing the IO APIC.......................IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:00 003 03 0 0 0 0 0 1 1 31 01 003 03 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 003 03 1 1 0 1 0 1 1 69 0a 003 03 0 0 0 0 0 1 1 71 0b 003 03 0 0 0 0 0 1 1 79 0c 003 03 0 0 0 0 0 1 1 81 0d 003 03 0 0 0 0 0 1 1 89 0e 003 03 0 0 0 0 0 1 1 91 0f 003 03 0 0 0 0 0 1 1 99IO APIC #15......
.... register #00: 0F000000
....... : physical APIC id: 0F
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 0A000000
....... : arbitration: 0A
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 003 03 1 1 0 1 0 1 1 A1 0b 003 03 1 1 0 1 0 1 1 A9 0c 003 03 1 1 0 1 0 1 1 B1 0d 003 03 1 1 0 1 0 1 1 B9 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 10
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ27 -> 11
IRQ28 -> 12
IRQ29 -> 13
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 930.2699 MHz.
..... host bus clock speed is 132.8955 MHz.
cpu: 0, clocks: 1328955, slice: 442985 CPU0<T0:1328944,T1:885952,D:7,S:442985,C:1328955>
cpu: 1, clocks: 1328955, slice: 442985 CPU1<T0:1328944,T1:442960,D:14,S:442985,C:1328955> checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at0xfd2fc, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 01PCI->APICIRQ transform: (B0,I2,P0) -> 27PCI->APICIRQ transform: (B0,I15,P0) -> 9PCI->APICIRQ transform: (B1,I3,P0) -> 28PCI->APICIRQ transform: (B1,I3,P1) -> 29
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169525kB/56508kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79 ServerWorks OSB4: chipset revision 0
ServerWorks OSB4: not 100% native mode: will probe irqs later
hda: CRN-8241B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Serial driver version 5.05 (2000-12-13) withMANY_PORTSSHARE_IRQSERIAL_PCIenabled
ttyS00 at0x03f8(irq = 4) is a 16550A
ttyS01 at0x02f8(irq = 3) is a 16550Apcnet32_probe_pci: found device 0x001022.0x002000ioaddr=0x002000 resource_flags=0x000101eth0: PCnet/FAST III 79C975 at
0x2000, 00 02 55 58 42 40
pcnet32:pcnet32_privatelp=cff3e000 lp_dma_addr=0xff3e000 assigned IRQ 27.
pcnet32.c:v1.25kf 26.9.1999 [email protected]
SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBsscsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBsVendor: IBM-PSG Model: DDYS-T36950M M Rev: S9AA
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0 (scsi1:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: IBM Model: YGLv3 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sg1 at scsi1, channel 0, id 8, lun 0, type 3 scsi1:0:0:0: Tagged Queuing enabled. Depth 8
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 192k freedconfig:
#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_ISA=y
#CONFIG_SBUSis not setCONFIG_UID16=y#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y#
# Processor type and features
#
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not setCONFIG_MPENTIUMIII=y
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MCRUSOEis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP2is not set
#CONFIG_MWINCHIP3Dis not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=y
#CONFIG_TOSHIBAis not set
#CONFIG_MICROCODEis not set
#CONFIG_X86_MSRis not set
#CONFIG_X86_CPUIDis not setCONFIG_NOHIGHMEM=y
#CONFIG_HIGHMEM4Gis not set
#CONFIG_HIGHMEM64Gis not set
#CONFIG_MATH_EMULATIONis not setCONFIG_MTRR=yCONFIG_SMP=yCONFIG_HAVE_DEC_LOCK=y#
# General setup
#CONFIG_NET=y
#CONFIG_VISWSis not setCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=y
#CONFIG_PCI_GOBIOSis not set
#CONFIG_PCI_GODIRECTis not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
#CONFIG_EISAis not set
#CONFIG_MCAis not set
#CONFIG_HOTPLUGis not set
#CONFIG_PCMCIAis not setCONFIG_SYSVIPC=y
#CONFIG_BSD_PROCESS_ACCTis not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
#CONFIG_KCORE_AOUTis not set
#CONFIG_BINFMT_AOUTis not setCONFIG_BINFMT_ELF=y
#CONFIG_BINFMT_MISCis not set
#CONFIG_PMis not set
#CONFIG_ACPIis not set
#CONFIG_APMis not set#
# Memory Technology Devices (MTD)
#
#CONFIG_MTDis not set#
# Parallel port support
#
#CONFIG_PARPORTis not set#
# Plug and Play configuration
#
#CONFIG_PNPis not set
#CONFIG_ISAPNPis not set#
# Block devices
#CONFIG_BLK_DEV_FD=m
#CONFIG_BLK_DEV_XDis not set
#CONFIG_PARIDEis not set
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not setCONFIG_BLK_DEV_LOOP=m
#CONFIG_BLK_DEV_NBDis not set
#CONFIG_BLK_DEV_RAMis not set
#CONFIG_BLK_DEV_INITRDis not set#
# Multi-device support (RAID and LVM)
#
#CONFIG_MDis not set
#CONFIG_BLK_DEV_MDis not set
#CONFIG_MD_LINEARis not set
#CONFIG_MD_RAID0is not set
#CONFIG_MD_RAID1is not set
#CONFIG_MD_RAID5is not set
#CONFIG_BLK_DEV_LVMis not set#
# Networking options
#
#CONFIG_PACKETis not set
#CONFIG_NETLINKis not set
#CONFIG_NETFILTERis not set
#CONFIG_FILTERis not setCONFIG_UNIX=yCONFIG_INET=y
#CONFIG_IP_MULTICASTis not set
#CONFIG_IP_ADVANCED_ROUTERis not set
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not set
#CONFIG_INET_ECNis not set
#CONFIG_SYN_COOKIESis not set
#CONFIG_IPV6is not set
#CONFIG_KHTTPDis not set
#CONFIG_ATMis not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set
#CONFIG_DECNETis not set
#CONFIG_BRIDGEis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_LLCis not set
#CONFIG_NET_DIVERTis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set
#CONFIG_NET_FASTROUTEis not set
#CONFIG_NET_HW_FLOWCONTROLis not set#
# QoS and/or fair queueing
#
#CONFIG_NET_SCHEDis not set#
# Telephony Support
#
#CONFIG_PHONEis not set
#CONFIG_PHONE_IXJis not set#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#CONFIG_BLK_DEV_HD_IDEis not set
#CONFIG_BLK_DEV_HDis not setCONFIG_BLK_DEV_IDEDISK=y
#CONFIG_IDEDISK_MULTI_MODEis not set
#CONFIG_BLK_DEV_IDEDISK_VENDORis not set
#CONFIG_BLK_DEV_IDEDISK_FUJITSUis not set
#CONFIG_BLK_DEV_IDEDISK_IBMis not set
#CONFIG_BLK_DEV_IDEDISK_MAXTORis not set
#CONFIG_BLK_DEV_IDEDISK_QUANTUMis not set
#CONFIG_BLK_DEV_IDEDISK_SEAGATEis not set
#CONFIG_BLK_DEV_IDEDISK_WDis not set
#CONFIG_BLK_DEV_COMMERIALis not set
#CONFIG_BLK_DEV_TIVOis not set
#CONFIG_BLK_DEV_IDECSis not setCONFIG_BLK_DEV_IDECD=y
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEFLOPPYis not set
#CONFIG_BLK_DEV_IDESCSIis not set
#CONFIG_BLK_DEV_CMD640is not set
#CONFIG_BLK_DEV_CMD640_ENHANCEDis not set
#CONFIG_BLK_DEV_ISAPNPis not set
#CONFIG_BLK_DEV_RZ1000is not setCONFIG_BLK_DEV_IDEPCI=y
#CONFIG_IDEPCI_SHARE_IRQis not set
#CONFIG_BLK_DEV_IDEDMA_PCIis not set
#CONFIG_BLK_DEV_OFFBOARDis not set
#CONFIG_IDEDMA_PCI_AUTOis not set
#CONFIG_BLK_DEV_IDEDMAis not set
#CONFIG_IDEDMA_PCI_WIPis not set
#CONFIG_IDEDMA_NEW_DRIVE_LISTINGSis not set
#CONFIG_BLK_DEV_AEC62XXis not set
#CONFIG_AEC62XX_TUNINGis not set
#CONFIG_BLK_DEV_ALI15X3is not set
#CONFIG_WDC_ALI15X3is not set
#CONFIG_BLK_DEV_AMD7409is not set
#CONFIG_AMD7409_OVERRIDEis not set
#CONFIG_BLK_DEV_CMD64Xis not set
#CONFIG_BLK_DEV_CY82C693is not set
#CONFIG_BLK_DEV_CS5530is not set
#CONFIG_BLK_DEV_HPT34Xis not set
#CONFIG_HPT34X_AUTODMAis not set
#CONFIG_BLK_DEV_HPT366is not set
#CONFIG_BLK_DEV_PIIXis not set
#CONFIG_PIIX_TUNINGis not set
#CONFIG_BLK_DEV_NS87415is not set
#CONFIG_BLK_DEV_OPTI621is not set
#CONFIG_BLK_DEV_PDC202XXis not set
#CONFIG_PDC202XX_BURSTis not set
#CONFIG_BLK_DEV_OSB4is not set
#CONFIG_BLK_DEV_SIS5513is not set
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not set
#CONFIG_BLK_DEV_VIA82CXXXis not set
#CONFIG_IDE_CHIPSETSis not set
#CONFIG_IDEDMA_AUTOis not set
#CONFIG_DMA_NONPCIis not set
#CONFIG_BLK_DEV_IDE_MODESis not set#
# SCSI support
#CONFIG_SCSI=yCONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40CONFIG_CHR_DEV_ST=y
#CONFIG_CHR_DEV_OSSTis not set
#CONFIG_BLK_DEV_SRis not setCONFIG_CHR_DEV_SG=yCONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y#
# SCSI low-level drivers
#
#CONFIG_BLK_DEV_3W_XXXX_RAIDis not set
#CONFIG_SCSI_7000FASSTis not set
#CONFIG_SCSI_ACARDis not set
#CONFIG_SCSI_AHA152Xis not set
#CONFIG_SCSI_AHA1542is not set
#CONFIG_SCSI_AHA1740is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_PROC_STATS=yCONFIG_AIC7XXX_RESET_DELAY=5
#CONFIG_SCSI_ADVANSYSis not set
#CONFIG_SCSI_IN2000is not set
#CONFIG_SCSI_AM53C974is not set
#CONFIG_SCSI_MEGARAIDis not set
#CONFIG_SCSI_BUSLOGICis not set
#CONFIG_SCSI_CPQFCTSis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_DTC3280is not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_EATA_DMAis not set
#CONFIG_SCSI_EATA_PIOis not set
#CONFIG_SCSI_FUTURE_DOMAINis not set
#CONFIG_SCSI_GDTHis not set
#CONFIG_SCSI_GENERIC_NCR5380is not setCONFIG_SCSI_IPS=y
#CONFIG_SCSI_INITIOis not set
#CONFIG_SCSI_INIA100is not set
#CONFIG_SCSI_NCR53C406Ais not set
#CONFIG_SCSI_NCR53C7xxis not set
#CONFIG_SCSI_NCR53C8XXis not set
#CONFIG_SCSI_SYM53C8XXis not set
#CONFIG_SCSI_PAS16is not set
#CONFIG_SCSI_PCI2000is not set
#CONFIG_SCSI_PCI2220Iis not set
#CONFIG_SCSI_PSI240Iis not set
#CONFIG_SCSI_QLOGIC_FASis not set
#CONFIG_SCSI_QLOGIC_ISPis not set
#CONFIG_SCSI_QLOGIC_FCis not set
#CONFIG_SCSI_QLOGIC_1280is not set
#CONFIG_SCSI_SEAGATEis not set
#CONFIG_SCSI_SIM710is not set
#CONFIG_SCSI_SYM53C416is not set
#CONFIG_SCSI_DC390Tis not set
#CONFIG_SCSI_T128is not set
#CONFIG_SCSI_U14_34Fis not set
#CONFIG_SCSI_ULTRASTORis not set
#CONFIG_SCSI_DEBUGis not set#
# IEEE 1394 (FireWire) support
#
#CONFIG_IEEE1394is not set#
# I2O device support
#
#CONFIG_I2Ois not set
#CONFIG_I2O_PCIis not set
#CONFIG_I2O_BLOCKis not set
#CONFIG_I2O_LANis not set
#CONFIG_I2O_SCSIis not set
#CONFIG_I2O_PROCis not set#
# Network device support
#CONFIG_NETDEVICES=y#
# ARCnet devices
#
#CONFIG_ARCNETis not set
#CONFIG_DUMMYis not set
#CONFIG_BONDINGis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set
#CONFIG_NET_SB1000is not set#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
#CONFIG_NET_VENDOR_3COMis not set
#CONFIG_LANCEis not set
#CONFIG_NET_VENDOR_SMCis not set
#CONFIG_NET_VENDOR_RACALis not set
#CONFIG_AT1700is not set
#CONFIG_DEPCAis not set
#CONFIG_HP100is not set
#CONFIG_NET_ISAis not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_AC3200is not set
#CONFIG_APRICOTis not set
#CONFIG_CS89x0is not set
#CONFIG_TULIPis not set
#CONFIG_DE4X5is not set
#CONFIG_DGRSis not set
#CONFIG_DM9102is not set
#CONFIG_EEPRO100is not set
#CONFIG_EEPRO100_PMis not set
#CONFIG_LNE390is not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not set
#CONFIG_NE3210is not set
#CONFIG_ES3210is not set
#CONFIG_8139TOOis not set
#CONFIG_RTL8129is not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_VIA_RHINEis not set
#CONFIG_WINBOND_840is not set
#CONFIG_HAPPYMEALis not set
#CONFIG_NET_POCKETis not set#
# Ethernet (1000 Mbit)
#
#CONFIG_ACENICis not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_SK98LINis not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set#
# Wireless LAN (non-hamradio)
#
#CONFIG_NET_RADIOis not set#
# Token Ring devices
#
#CONFIG_TRis not set
#CONFIG_NET_FCis not set
#CONFIG_RCPCIis not set
#CONFIG_SHAPERis not set#
# Wan interfaces
#
#CONFIG_WANis not set#
# Amateur Radio support
#
#CONFIG_HAMRADIOis not set#
# IrDA (infrared) support
#
#CONFIG_IRDAis not set#
# ISDN subsystem
#
#CONFIG_ISDNis not set#
# Old CD-ROM drivers (not SCSI, not IDE)
#
#CONFIG_CD_NO_IDESCSIis not set#
# Input core support
#
#CONFIG_INPUTis not set#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=yCONFIG_SERIAL_CONSOLE=y
#CONFIG_SERIAL_EXTENDEDis not set
#CONFIG_SERIAL_NONSTANDARDis not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256#
# I2C support
#
#CONFIG_I2Cis not set#
# Mice
#
#CONFIG_BUSMOUSEis not setCONFIG_MOUSE=yCONFIG_PSMOUSE=yCONFIG_82C710_MOUSE=y
#CONFIG_PC110_PADis not set#
# Joysticks
#
#CONFIG_JOYSTICKis not set
#CONFIG_QIC02_TAPEis not set#
# Watchdog Cards
#
#CONFIG_WATCHDOGis not set
#CONFIG_INTEL_RNGis not set
#CONFIG_NVRAMis not set
#CONFIG_RTCis not set
#CONFIG_DTLKis not set
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set#
# Ftape, the floppy tape device driver
#
#CONFIG_FTAPEis not set
#CONFIG_AGPis not set
#CONFIG_DRMis not set#
# Multimedia devices
#
#CONFIG_VIDEO_DEVis not set#
# File systems
#
#CONFIG_QUOTAis not set
#CONFIG_AUTOFS_FSis not set
#CONFIG_AUTOFS4_FSis not set
#CONFIG_REISERFS_FSis not set
#CONFIG_REISERFS_CHECKis not set
#CONFIG_ADFS_FSis not set
#CONFIG_ADFS_FS_RWis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_BFS_FSis not setCONFIG_FAT_FS=m
#CONFIG_MSDOS_FSis not set
#CONFIG_UMSDOS_FSis not setCONFIG_VFAT_FS=m
#CONFIG_EFS_FSis not set
#CONFIG_JFFS_FSis not set
#CONFIG_CRAMFSis not set
#CONFIG_RAMFSis not setCONFIG_ISO9660_FS=y
#CONFIG_JOLIETis not set
#CONFIG_MINIX_FSis not set
#CONFIG_NTFS_FSis not set
#CONFIG_NTFS_RWis not set
#CONFIG_HPFS_FSis not setCONFIG_PROC_FS=y
#CONFIG_DEVFS_FSis not set
#CONFIG_DEVFS_MOUNTis not set
#CONFIG_DEVFS_DEBUGis not setCONFIG_DEVPTS_FS=y
#CONFIG_QNX4FS_FSis not set
#CONFIG_QNX4FS_RWis not set
#CONFIG_ROMFS_FSis not setCONFIG_EXT2_FS=y
#CONFIG_SYSV_FSis not set
#CONFIG_SYSV_FS_WRITEis not set
#CONFIG_UDF_FSis not set
#CONFIG_UDF_RWis not set
#CONFIG_UFS_FSis not set
#CONFIG_UFS_FS_WRITEis not set#
# Network File Systems
#
#CONFIG_CODA_FSis not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
#CONFIG_ROOT_NFSis not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=y
#CONFIG_SMB_FSis not set
#CONFIG_NCP_FSis not set
#CONFIG_NCPFS_PACKET_SIGNINGis not set
#CONFIG_NCPFS_IOCTL_LOCKINGis not set
#CONFIG_NCPFS_STRONGis not set
#CONFIG_NCPFS_NFS_NSis not set
#CONFIG_NCPFS_OS2_NSis not set
#CONFIG_NCPFS_SMALLDOSis not set
#CONFIG_NCPFS_NLSis not set
#CONFIG_NCPFS_EXTRASis not set#
# Partition Types
#
#CONFIG_PARTITION_ADVANCEDis not setCONFIG_MSDOS_PARTITION=y
#CONFIG_SMB_NLSis not setCONFIG_NLS=y#
# Native Language Support
#CONFIG_NLS_DEFAULT="cp437"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not setCONFIG_NLS_CODEPAGE_850=m
#CONFIG_NLS_CODEPAGE_852is not set
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_950is not setCONFIG_NLS_ISO8859_1=y
#CONFIG_NLS_ISO8859_2is not set
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_UTF8is not set#
# Console drivers
#CONFIG_VGA_CONSOLE=y
#CONFIG_VIDEO_SELECTis not set
#CONFIG_MDA_CONSOLEis not set#
# Frame-buffer support
#
#CONFIG_FBis not set#
# Sound
#
#CONFIG_SOUNDis not set#
# USB support
#
#CONFIG_USBis not set#
# Kernel hacking
#
#CONFIG_MAGIC_SYSRQis not set
[root@www src]# cat config.24
#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_ISA=y
#CONFIG_SBUSis not setCONFIG_UID16=y#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y#
# Processor type and features
#
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not setCONFIG_MPENTIUMIII=y
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MCRUSOEis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP2is not set
#CONFIG_MWINCHIP3Dis not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=y
#CONFIG_TOSHIBAis not set
#CONFIG_MICROCODEis not set
#CONFIG_X86_MSRis not set
#CONFIG_X86_CPUIDis not setCONFIG_NOHIGHMEM=y
#CONFIG_HIGHMEM4Gis not set
#CONFIG_HIGHMEM64Gis not set
#CONFIG_MATH_EMULATIONis not setCONFIG_MTRR=yCONFIG_SMP=yCONFIG_HAVE_DEC_LOCK=y#
# General setup
#CONFIG_NET=y
#CONFIG_VISWSis not setCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=y
#CONFIG_PCI_GOBIOSis not set
#CONFIG_PCI_GODIRECTis not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
#CONFIG_EISAis not set
#CONFIG_MCAis not set
#CONFIG_HOTPLUGis not set
#CONFIG_PCMCIAis not setCONFIG_SYSVIPC=y
#CONFIG_BSD_PROCESS_ACCTis not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
#CONFIG_KCORE_AOUTis not set
#CONFIG_BINFMT_AOUTis not setCONFIG_BINFMT_ELF=y
#CONFIG_BINFMT_MISCis not set
#CONFIG_PMis not set
#CONFIG_ACPIis not set
#CONFIG_APMis not set#
# Memory Technology Devices (MTD)
#
#CONFIG_MTDis not set#
# Parallel port support
#
#CONFIG_PARPORTis not set#
# Plug and Play configuration
#
#CONFIG_PNPis not set
#CONFIG_ISAPNPis not set#
# Block devices
#CONFIG_BLK_DEV_FD=m
#CONFIG_BLK_DEV_XDis not set
#CONFIG_PARIDEis not set
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not setCONFIG_BLK_DEV_LOOP=m
#CONFIG_BLK_DEV_NBDis not set
#CONFIG_BLK_DEV_RAMis not set
#CONFIG_BLK_DEV_INITRDis not set#
# Multi-device support (RAID and LVM)
#
#CONFIG_MDis not set
#CONFIG_BLK_DEV_MDis not set
#CONFIG_MD_LINEARis not set
#CONFIG_MD_RAID0is not set
#CONFIG_MD_RAID1is not set
#CONFIG_MD_RAID5is not set
#CONFIG_BLK_DEV_LVMis not set#
# Networking options
#
#CONFIG_PACKETis not set
#CONFIG_NETLINKis not set
#CONFIG_NETFILTERis not set
#CONFIG_FILTERis not setCONFIG_UNIX=yCONFIG_INET=y
#CONFIG_IP_MULTICASTis not set
#CONFIG_IP_ADVANCED_ROUTERis not set
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not set
#CONFIG_INET_ECNis not set
#CONFIG_SYN_COOKIESis not set
#CONFIG_IPV6is not set
#CONFIG_KHTTPDis not set
#CONFIG_ATMis not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set
#CONFIG_DECNETis not set
#CONFIG_BRIDGEis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_LLCis not set
#CONFIG_NET_DIVERTis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set
#CONFIG_NET_FASTROUTEis not set
#CONFIG_NET_HW_FLOWCONTROLis not set#
# QoS and/or fair queueing
#
#CONFIG_NET_SCHEDis not set#
# Telephony Support
#
#CONFIG_PHONEis not set
#CONFIG_PHONE_IXJis not set#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#CONFIG_BLK_DEV_HD_IDEis not set
#CONFIG_BLK_DEV_HDis not setCONFIG_BLK_DEV_IDEDISK=y
#CONFIG_IDEDISK_MULTI_MODEis not set
#CONFIG_BLK_DEV_IDEDISK_VENDORis not set
#CONFIG_BLK_DEV_IDEDISK_FUJITSUis not set
#CONFIG_BLK_DEV_IDEDISK_IBMis not set
#CONFIG_BLK_DEV_IDEDISK_MAXTORis not set
#CONFIG_BLK_DEV_IDEDISK_QUANTUMis not set
#CONFIG_BLK_DEV_IDEDISK_SEAGATEis not set
#CONFIG_BLK_DEV_IDEDISK_WDis not set
#CONFIG_BLK_DEV_COMMERIALis not set
#CONFIG_BLK_DEV_TIVOis not set
#CONFIG_BLK_DEV_IDECSis not setCONFIG_BLK_DEV_IDECD=y
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEFLOPPYis not set
#CONFIG_BLK_DEV_IDESCSIis not set
#CONFIG_BLK_DEV_CMD640is not set
#CONFIG_BLK_DEV_CMD640_ENHANCEDis not set
#CONFIG_BLK_DEV_ISAPNPis not set
#CONFIG_BLK_DEV_RZ1000is not setCONFIG_BLK_DEV_IDEPCI=y
#CONFIG_IDEPCI_SHARE_IRQis not set
#CONFIG_BLK_DEV_IDEDMA_PCIis not set
#CONFIG_BLK_DEV_OFFBOARDis not set
#CONFIG_IDEDMA_PCI_AUTOis not set
#CONFIG_BLK_DEV_IDEDMAis not set
#CONFIG_IDEDMA_PCI_WIPis not set
#CONFIG_IDEDMA_NEW_DRIVE_LISTINGSis not set
#CONFIG_BLK_DEV_AEC62XXis not set
#CONFIG_AEC62XX_TUNINGis not set
#CONFIG_BLK_DEV_ALI15X3is not set
#CONFIG_WDC_ALI15X3is not set
#CONFIG_BLK_DEV_AMD7409is not set
#CONFIG_AMD7409_OVERRIDEis not set
#CONFIG_BLK_DEV_CMD64Xis not set
#CONFIG_BLK_DEV_CY82C693is not set
#CONFIG_BLK_DEV_CS5530is not set
#CONFIG_BLK_DEV_HPT34Xis not set
#CONFIG_HPT34X_AUTODMAis not set
#CONFIG_BLK_DEV_HPT366is not set
#CONFIG_BLK_DEV_PIIXis not set
#CONFIG_PIIX_TUNINGis not set
#CONFIG_BLK_DEV_NS87415is not set
#CONFIG_BLK_DEV_OPTI621is not set
#CONFIG_BLK_DEV_PDC202XXis not set
#CONFIG_PDC202XX_BURSTis not set
#CONFIG_BLK_DEV_OSB4is not set
#CONFIG_BLK_DEV_SIS5513is not set
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not set
#CONFIG_BLK_DEV_VIA82CXXXis not set
#CONFIG_IDE_CHIPSETSis not set
#CONFIG_IDEDMA_AUTOis not set
#CONFIG_DMA_NONPCIis not set
#CONFIG_BLK_DEV_IDE_MODESis not set#
# SCSI support
#CONFIG_SCSI=yCONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40CONFIG_CHR_DEV_ST=y
#CONFIG_CHR_DEV_OSSTis not set
#CONFIG_BLK_DEV_SRis not setCONFIG_CHR_DEV_SG=yCONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y#
# SCSI low-level drivers
#
#CONFIG_BLK_DEV_3W_XXXX_RAIDis not set
#CONFIG_SCSI_7000FASSTis not set
#CONFIG_SCSI_ACARDis not set
#CONFIG_SCSI_AHA152Xis not set
#CONFIG_SCSI_AHA1542is not set
#CONFIG_SCSI_AHA1740is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_PROC_STATS=yCONFIG_AIC7XXX_RESET_DELAY=5
#CONFIG_SCSI_ADVANSYSis not set
#CONFIG_SCSI_IN2000is not set
#CONFIG_SCSI_AM53C974is not set
#CONFIG_SCSI_MEGARAIDis not set
#CONFIG_SCSI_BUSLOGICis not set
#CONFIG_SCSI_CPQFCTSis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_DTC3280is not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_EATA_DMAis not set
#CONFIG_SCSI_EATA_PIOis not set
#CONFIG_SCSI_FUTURE_DOMAINis not set
#CONFIG_SCSI_GDTHis not set
#CONFIG_SCSI_GENERIC_NCR5380is not setCONFIG_SCSI_IPS=y
#CONFIG_SCSI_INITIOis not set
#CONFIG_SCSI_INIA100is not set
#CONFIG_SCSI_NCR53C406Ais not set
#CONFIG_SCSI_NCR53C7xxis not set
#CONFIG_SCSI_NCR53C8XXis not set
#CONFIG_SCSI_SYM53C8XXis not set
#CONFIG_SCSI_PAS16is not set
#CONFIG_SCSI_PCI2000is not set
#CONFIG_SCSI_PCI2220Iis not set
#CONFIG_SCSI_PSI240Iis not set
#CONFIG_SCSI_QLOGIC_FASis not set
#CONFIG_SCSI_QLOGIC_ISPis not set
#CONFIG_SCSI_QLOGIC_FCis not set
#CONFIG_SCSI_QLOGIC_1280is not set
#CONFIG_SCSI_SEAGATEis not set
#CONFIG_SCSI_SIM710is not set
#CONFIG_SCSI_SYM53C416is not set
#CONFIG_SCSI_DC390Tis not set
#CONFIG_SCSI_T128is not set
#CONFIG_SCSI_U14_34Fis not set
#CONFIG_SCSI_ULTRASTORis not set
#CONFIG_SCSI_DEBUGis not set#
# IEEE 1394 (FireWire) support
#
#CONFIG_IEEE1394is not set#
# I2O device support
#
#CONFIG_I2Ois not set
#CONFIG_I2O_PCIis not set
#CONFIG_I2O_BLOCKis not set
#CONFIG_I2O_LANis not set
#CONFIG_I2O_SCSIis not set
#CONFIG_I2O_PROCis not set#
# Network device support
#CONFIG_NETDEVICES=y#
# ARCnet devices
#
#CONFIG_ARCNETis not set
#CONFIG_DUMMYis not set
#CONFIG_BONDINGis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set
#CONFIG_NET_SB1000is not set#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
#CONFIG_NET_VENDOR_3COMis not set
#CONFIG_LANCEis not set
#CONFIG_NET_VENDOR_SMCis not set
#CONFIG_NET_VENDOR_RACALis not set
#CONFIG_AT1700is not set
#CONFIG_DEPCAis not set
#CONFIG_HP100is not set
#CONFIG_NET_ISAis not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_AC3200is not set
#CONFIG_APRICOTis not set
#CONFIG_CS89x0is not set
#CONFIG_TULIPis not set
#CONFIG_DE4X5is not set
#CONFIG_DGRSis not set
#CONFIG_DM9102is not set
#CONFIG_EEPRO100is not set
#CONFIG_EEPRO100_PMis not set
#CONFIG_LNE390is not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not set
#CONFIG_NE3210is not set
#CONFIG_ES3210is not set
#CONFIG_8139TOOis not set
#CONFIG_RTL8129is not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_VIA_RHINEis not set
#CONFIG_WINBOND_840is not set
#CONFIG_HAPPYMEALis not set
#CONFIG_NET_POCKETis not set#
# Ethernet (1000 Mbit)
#
#CONFIG_ACENICis not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_SK98LINis not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set#
# Wireless LAN (non-hamradio)
#
#CONFIG_NET_RADIOis not set#
# Token Ring devices
#
#CONFIG_TRis not set
#CONFIG_NET_FCis not set
#CONFIG_RCPCIis not set
#CONFIG_SHAPERis not set#
# Wan interfaces
#
#CONFIG_WANis not set#
# Amateur Radio support
#
#CONFIG_HAMRADIOis not set#
# IrDA (infrared) support
#
#CONFIG_IRDAis not set#
# ISDN subsystem
#
#CONFIG_ISDNis not set#
# Old CD-ROM drivers (not SCSI, not IDE)
#
#CONFIG_CD_NO_IDESCSIis not set#
# Input core support
#
#CONFIG_INPUTis not set#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=yCONFIG_SERIAL_CONSOLE=y
#CONFIG_SERIAL_EXTENDEDis not set
#CONFIG_SERIAL_NONSTANDARDis not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256#
# I2C support
#
#CONFIG_I2Cis not set#
# Mice
#
#CONFIG_BUSMOUSEis not setCONFIG_MOUSE=yCONFIG_PSMOUSE=yCONFIG_82C710_MOUSE=y
#CONFIG_PC110_PADis not set#
# Joysticks
#
#CONFIG_JOYSTICKis not set
#CONFIG_QIC02_TAPEis not set#
# Watchdog Cards
#
#CONFIG_WATCHDOGis not set
#CONFIG_INTEL_RNGis not set
#CONFIG_NVRAMis not set
#CONFIG_RTCis not set
#CONFIG_DTLKis not set
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set#
# Ftape, the floppy tape device driver
#
#CONFIG_FTAPEis not set
#CONFIG_AGPis not set
#CONFIG_DRMis not set#
# Multimedia devices
#
#CONFIG_VIDEO_DEVis not set#
# File systems
#
#CONFIG_QUOTAis not set
#CONFIG_AUTOFS_FSis not set
#CONFIG_AUTOFS4_FSis not set
#CONFIG_REISERFS_FSis not set
#CONFIG_REISERFS_CHECKis not set
#CONFIG_ADFS_FSis not set
#CONFIG_ADFS_FS_RWis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_BFS_FSis not setCONFIG_FAT_FS=m
#CONFIG_MSDOS_FSis not set
#CONFIG_UMSDOS_FSis not setCONFIG_VFAT_FS=m
#CONFIG_EFS_FSis not set
#CONFIG_JFFS_FSis not set
#CONFIG_CRAMFSis not set
#CONFIG_RAMFSis not setCONFIG_ISO9660_FS=y
#CONFIG_JOLIETis not set
#CONFIG_MINIX_FSis not set
#CONFIG_NTFS_FSis not set
#CONFIG_NTFS_RWis not set
#CONFIG_HPFS_FSis not setCONFIG_PROC_FS=y
#CONFIG_DEVFS_FSis not set
#CONFIG_DEVFS_MOUNTis not set
#CONFIG_DEVFS_DEBUGis not setCONFIG_DEVPTS_FS=y
#CONFIG_QNX4FS_FSis not set
#CONFIG_QNX4FS_RWis not set
#CONFIG_ROMFS_FSis not setCONFIG_EXT2_FS=y
#CONFIG_SYSV_FSis not set
#CONFIG_SYSV_FS_WRITEis not set
#CONFIG_UDF_FSis not set
#CONFIG_UDF_RWis not set
#CONFIG_UFS_FSis not set
#CONFIG_UFS_FS_WRITEis not set#
# Network File Systems
#
#CONFIG_CODA_FSis not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
#CONFIG_ROOT_NFSis not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=y
#CONFIG_SMB_FSis not set
#CONFIG_NCP_FSis not set
#CONFIG_NCPFS_PACKET_SIGNINGis not set
#CONFIG_NCPFS_IOCTL_LOCKINGis not set
#CONFIG_NCPFS_STRONGis not set
#CONFIG_NCPFS_NFS_NSis not set
#CONFIG_NCPFS_OS2_NSis not set
#CONFIG_NCPFS_SMALLDOSis not set
#CONFIG_NCPFS_NLSis not set
#CONFIG_NCPFS_EXTRASis not set#
# Partition Types
#
#CONFIG_PARTITION_ADVANCEDis not setCONFIG_MSDOS_PARTITION=y
#CONFIG_SMB_NLSis not setCONFIG_NLS=y#
# Native Language Support
#CONFIG_NLS_DEFAULT="cp437"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not setCONFIG_NLS_CODEPAGE_850=m
#CONFIG_NLS_CODEPAGE_852is not set
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_950is not setCONFIG_NLS_ISO8859_1=y
#CONFIG_NLS_ISO8859_2is not set
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_UTF8is not set#
# Console drivers
#CONFIG_VGA_CONSOLE=y
#CONFIG_VIDEO_SELECTis not set
#CONFIG_MDA_CONSOLEis not set#
# Frame-buffer support
#
#CONFIG_FBis not set#
# Sound
#
#CONFIG_SOUNDis not set#
# USB support
#
#CONFIG_USBis not set#
# Kernel hacking
#
#CONFIG_MAGIC_SYSRQis not setRegards
Hartmut
--
Hartmut Holz
zweitwerk GmbH - ein Unternehmen der Media Bild Imaging AG Stahltwiete 16
22761 HamburgTel: 040 / 853756-14
Fax: 040 / 853756-50
email: [email protected]-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 4 lines
Tim Wright - [email protected] or [email protected] or [email protected] IBM Linux Technology Center, Beaverton, Oregon Interested in Linux scalability ? Look at http://lse.sourceforge.net/ "Nobody ever said I was charming, they said "Rimmer, you're a git!"" RD VI
Sorry for quoting the whole message. Obviously I need some fresh air :-)
Tim
Signature · 4 lines
Tim Wright - [email protected] or [email protected] or [email protected] IBM Linux Technology Center, Beaverton, Oregon Interested in Linux scalability ? Look at http://lse.sourceforge.net/ "Nobody ever said I was charming, they said "Rimmer, you're a git!"" RD VI
Quoted 10 lines
-----Ursprüngliche Nachricht-----
Von: Tim Wright [mailto:[email protected]]
Gesendet: Mittwoch, 14. März 2001 00:04
An: Hartmut Holz
Cc: [email protected]
Betreff: Re: 2.4.x: Netfinity 4500 SMP freezes without any trace
Quoted 3 lines
Reboot with 'nmi_watchdog=0'. That will "fix" it for now. Still chasing this. I'll announce when I find out root cause.
It works. Thank you.
Regards
Hartmut