Skip to contentSkip to conversation

Can't get driver to work: D-Link DFE-570TX (de4x5.o) on Linux 2.4

DISCUSSION Avi Green 2 participants 2 messages Mar 14, 2001

lore
Share & tools
lore

Avi Green

author
#0 lore raw

Dear folks,

I apologize for bothering you, but if by any chance this is an easy question for you to answer (wishful thinking, huh?) I'd be very grateful if you would.*

I have some new Hawk PCs (Pentium-III) with D-Link DFE-570TX Fast Ethernet 4-port server adapters. When I build the machines using Red Hat's standard 6.2 installer, it automatically finds the de4x5.o driver module, inserts it into the kernel (which is 2.2), and sets up four Ethernet interfaces using that driver.

Unfortunately, when I build the 2.4 kernel (which I must do because I need Netfilter), I can't get the card to work.

* I've tried inserting the old de4x5.o module that came with 2.2, but there are unmatched symbols.

* I've tried inserting the new de4x5.o module that came with 2.4 in drivers/net, but it either complains of no such device, I/O error, or "couldn't find the kernel version the module was compiled for".

* I've tried configuring the kernel with the 3c590/3c900, {DEPCA, DE10x, DE200, DE201, DE202, DE422}, Tulip (dc21x4x), Generic DECchip, and VIA Rhine chips, but it doesn't seem to help, whether they're included as modules or compiled into the kernel. I've downloaded the latest Tulip driver but haven't tried it yet.

* I've spent many hours trying to get this to work, and my manager is getting desparate.

Do you have any ideas?

Thank you VERY, VERY much,
Avi

======================================================
= Avi Green :-) avi at sputnik7.com (-: 212 217-1147 = ======== Unix SysAdmin & System Specialist ========= ============= http://www.sputnik7.com ============== ===== Netcasting Music, Videos, Film & Anime 24/7 ====

* I _do_ appreciate any help you give me, and I apologize for bothering you without first exhausting all of my other resources. I only do this because it's so time-critical. I haven't contributed yet to this community, but I've given lots in other places. Thanks for being understanding.

#1 lore raw
Quoted 29 lines · Avi Green

Dear folks,

I apologize for bothering you, but if by any chance this is an easy question for you to answer (wishful thinking, huh?) I'd be very grateful if you would.*

I have some new Hawk PCs (Pentium-III) with D-Link DFE-570TX Fast Ethernet 4-port server adapters. When I build the machines using Red Hat's standard 6.2 installer, it automatically finds the de4x5.o driver module, inserts it into the kernel (which is 2.2), and sets up four Ethernet interfaces using that driver.

Unfortunately, when I build the 2.4 kernel (which I must do because I need Netfilter), I can't get the card to work.

* I've tried inserting the old de4x5.o module that came with 2.2, but there are unmatched symbols.

* I've tried inserting the new de4x5.o module that came with 2.4 in drivers/net, but it either complains of no such device, I/O error, or "couldn't find the kernel version the module was compiled for".

* I've tried configuring the kernel with the 3c590/3c900, {DEPCA, DE10x, DE200, DE201, DE202, DE422}, Tulip (dc21x4x), Generic DECchip, and VIA Rhine chips, but it doesn't seem to help, whether they're included as modules or compiled into the kernel. I've downloaded the latest Tulip driver but haven't tried it yet.

Quoted 4 lines

* I've spent many hours trying to get this to work, and my manager is getting desparate.

Do you have any ideas?

I'm using 2.4 with DFE-570TX cards in a bunch of routers and other machines and I've never had any problems with the cards. I use the tulip driver in 2.4 in some machines (not routers) and in the routers I use an optimized version (ftp://robur.slu.se/pub/Linux/net-development/tulip-ss010111.tar.gz is the latest stable version)

I havn't had the problem you describe. Everything works fine here.

/Martin