Skip to contentSkip to conversation

atyfb,matrox hardlocks, multihead, USB broken, 2.4.2-ac8

DISCUSSION Petr Vandrovec 2 participants 3 messages Mar 19, 2001 – Mar 20, 2001

lore
Share & tools
lore
#0 lore raw

Sorry, forgot to CC linux kernel...

Quoted 7 lines · Elmer Joandi

2.4.2-ac8, with 4 graphics cards, Dual Celeron now with 2.4.2-ac8 it is even more clear
any attempt to insert module ends with straight lockup video mode swithc occurs and then ping to the box stops immediately.
more, starting X locks kernel the same way.

Try 'video=scrollback:0'. Scrollback code does not handle heads with different width correctly.
Petr Vandrovec

#1 lore raw

Got it to work somewhat...
that was real long f***

the only sequence -
no dga,
kernel boots and BIOS uses Matrox PCI as first graphics via matrox
start up two ATI cards(one AGP, one PCI)(xinerama mode, screwed output ) with Xserver hacked to read /dev/input/event* ant talking direct to ATI.

now insert matroxfb_base
now start two normal XFree86 on framebuffer /dev/fb0 and /dev/fb1, i.e. matroxes, xinerama keyboard from system console...

log into matroxes
ATI dualscreen picture clears itself by magic spell and becomes usable.

everything works... until ATI exits, then there is kernel hardlock.

Weird that all locks are hardlocks - no ping no sysreq...

SMP here.

ah - message from matrox framebuffer - complaining no irq A assigned to slot, and suggesting that BIOS is buggy.

Will I be more happy when using a dualhead matrox AGP instead of AGP+PCI ATI pair ?

2.4.0 kernel, 2.4.2-ac8 USB looks like very very broken.

elmer.

#2 lore raw
Quoted 2 lines · Elmer Joandi

ah - message from matrox framebuffer - complaining no irq A assigned to slot, and suggesting that BIOS is buggy.

Maybe you disabled it in BIOS? My BIOS has option 'assign irq to vga'...

Quoted 2 lines

Will I be more happy when using a dualhead matrox AGP instead of AGP+PCI ATI pair ?

It depends on how much heads you need. If you want more than one head and all heads need full acceleration, do not go to G400/G450. There is only one accelerator on them... (well, if you are using all displays together as one big workplace, you can try it; in that case it has benefit that both heads share same memory, so you can save some intersection operations).

Quoted 1 line

2.4.0 kernel, 2.4.2-ac8 USB looks like very very broken.

USB worked for me until about 2.4.2-ac12 (VIA chipset).
Petr