Skip to contentSkip to conversation

Channel bonding kernel crash, workaround

DISCUSSION Pfenniger Daniel 1 participant 1 message Mar 23, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

Up to the latests kernels (-> 2.4.2) channel bonding crashes the kernel (aille...) when turning it off (e.g. at reboot).

Here is a way to avoid this, which might help gourous to track the bug. Suppose ifconfig says:

bond0 Link encap:Ethernet HWaddr 00:40:05:A1:C4:13
inet addr:192.168.2.64 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:823297 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0

eth0 Link encap:Ethernet HWaddr 00:40:05:A1:C4:13

          inet addr:192.168.2.64  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:487424 errors:0 dropped:0 overruns:0 frame:0
          TX packets:411649 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:19 Base address:0xd000 

eth1 Link encap:Ethernet HWaddr 00:40:05:A1:C4:13

          inet addr:192.168.2.64  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:487526 errors:0 dropped:0 overruns:0 frame:0
          TX packets:411648 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:18 Base address:0xb800 

then the exact sequence:

ifconfig eth0 down
ifconfig eth1 down
ifconfig bond0 down
ifconfig eth0 down
ifconfig eth1 down

turns off bond0 without crash. This was tested on several computers with all kernel 2.4.2, SMP Pentium II and tulip 21140 and/or 21142/3 NICs.

Dan