Skip to contentSkip to conversation

Tip build error

PATCH Brady Brown 2 participants 2 messages Mar 29, 2001 – Mar 31, 2001 MIPS

lore
Share & tools
lore
#0 lore raw

I pulled the CVS tip yesterday and had problems building it for ATLAS because of the changes to the set_cp0_config arguments. Patch below to arch/mips/mm/mips32.c of how I fixed this. I think this is the intended new use?

mips32.c Thu Mar 29 13:34:36 2001 renamed from mips32.c.orig Thu Mar 29 13:29:29 2001 +3 -2
@@ -1051,10 +1051,11 @@
 
        printk("CPU revision is: %08x\n", read_32bit_cp0_register(CP0_PRID));
 
+       clear_cp0_config(CONF_CM_CMASK);
 #ifdef CONFIG_MIPS_UNCACHED
-       set_cp0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+       set_cp0_config(CONF_CM_UNCACHED);
 #else
-       set_cp0_config(CONF_CM_CMASK, CONF_CM_CACHABLE_NONCOHERENT);
+       set_cp0_config(CONF_CM_CACHABLE_NONCOHERENT);
 #endif
 
        probe_icache(config);

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brady Brown ([email protected]) Work:(801)619-6103
Texas Instruments: Broadband Access Group
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

#1 lore raw
Quoted 4 lines · Brady Brown

I pulled the CVS tip yesterday and had problems building it for ATLAS because of the changes to the set_cp0_config arguments. Patch below to arch/mips/mm/mips32.c of how I fixed this. I think this is the intended new use?

No, set_cp0_status only sets bits, clear_cp0_status clears bits, change_cp0_status is the old set_cp0_status function.

I fixed this in CVS.

Ralf