ATA 100
Quoted 24 lines · Vojtech Pavlik
Quoted 22 lines · Manuel Ignacio Monge Garcia
El Mié 18 Abr 2001 15:16, escribiste:
Quoted 5 lines
I don't know about other possible problems with the kernel, but you must use an 80 wire IDE cable for UDMA66/100 to work.
Quoted 2 lines
-----------------------Primary IDE-------Secondary IDE------ Cable Type: 40w 40w
Strange thing. With previous version of kernel (2.4.1 I think), I haven't got this problem. May be a bios detection problem?
Extract from
/usr/src/linux/drivers/ide/via82cxxx..c:*
* PIO 0-5, MWDMA 0-2, SWDMA 0-2 and UDMA 0-5
*
* (this includes UDMA33, 66 and 100) modes. UDMA66 and higher modes are
* autoenabled only in case the BIOS has detected a 80 wire cable. To ignore
* the BIOS data and assume the cable is present, use 'ide0=ata66' or
* 'ide1=ata66' on the kernel command line.
*
Quoted 5 lines
Quoted 1 line
I've tried with ide0=ata100, but this options doesn't work.
Try ide0=ata66 instead. The option should have been named ide0=80wire, but, well, "ata66" was chosen as the name, because that was it at the time.
Any chance of auto detecting this ?
I just hate when linux is relaying on the BIOS ...
BTW , why are there 666 CONFIG_.*IDE.*DMA.* switches ?
Signature · 4 lines
David Balazic -------------- "Be excellent to each other." - Bill & Ted - - - - - - - - - - - - - - - - - - - - - -
Quoted 26 lines · David Balazic
Quoted 24 lines · Vojtech Pavlik
Quoted 22 lines · Manuel Ignacio Monge Garcia
El Mié 18 Abr 2001 15:16, escribiste:
Quoted 5 lines
I don't know about other possible problems with the kernel, but you must use an 80 wire IDE cable for UDMA66/100 to work.
Quoted 2 lines
-----------------------Primary IDE-------Secondary IDE------ Cable Type: 40w 40w
Strange thing. With previous version of kernel (2.4.1 I think), I haven't got this problem. May be a bios detection problem?
Extract from
/usr/src/linux/drivers/ide/via82cxxx..c:*
* PIO 0-5, MWDMA 0-2, SWDMA 0-2 and UDMA 0-5
*
* (this includes UDMA33, 66 and 100) modes. UDMA66 and higher modes are
* autoenabled only in case the BIOS has detected a 80 wire cable. To ignore
* the BIOS data and assume the cable is present, use 'ide0=ata66' or
* 'ide1=ata66' on the kernel command line.
*
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
I've tried with ide0=ata100, but this options doesn't work.
Try ide0=ata66 instead. The option should have been named ide0=80wire, but, well, "ata66" was chosen as the name, because that was it at the time.
Any chance of auto detecting this ?
None. It's different on each (pre-686b) VIA motherboard.
Quoted 1 line
I just hate when linux is relaying on the BIOS ...
We don't have any other chance here. Actually we'll have to rely on the BIOS for even more in the next release of the driver to make it work on all boards out there.
Quoted 1 line
BTW , why are there 666 CONFIG_.*IDE.*DMA.* switches ?
Ask Andre. :)
Signature · 2 lines
Vojtech Pavlik SuSE Labs