Skip to contentSkip to conversation

SCSI Tape corruption - update

DISCUSSION Ishikawa 1 participant 1 message May 9, 2001

lore
Share & tools
lore

Ishikawa

author
#0 lore raw

For comparison purposes,

I use stock kernel 2.4.4.
Use scsi tape support as module.
Tape drive is HP c1539 (aka 1533a) dds-2.
This drive is on the scsi chain of Tekram dc390, tmscsim driver (used as module).
Hardware compression is enabled.

Under this setup,

tar cvbf 20 /dev/st0 large_directory

works perfectly, and I can read it back without problem.

What software do you use for writing to tape?

Or maybe the problem is in the latest -ac tree only?

(HP has a software that checks the hardware installation and drive health.
The software runs on Windows, and it supports firmware upgrade, simple drive self-check, read/write check, etc. Highly recommended. Obviously, the software is meant to help the HP tech support. It generates a support ticket with the internal state of the firmware media recoverable error statistics history and the like.

If the manufacturer of your tape drive has
a similar test software, you might want to check
the hardware using the vendor software.)