lift the ioport_resource limit ...
Currently IO_SPACE_LIMIT is 0xffff, which is probably borrowed from the legacy i386 code. Let us remove that limit, so that each machine does not have to laboriously reset it.
BTW, a prudent machine port should probably always reset it to a more sane range - in any case having 0xffff default value does not make much sense.
Jun
include/asm-mips/io.h Wed May 9 10:26:44 2001 renamed from include/asm-mips/io.h.orig Fri Feb 9 16:43:15 2001 +1 -1
@@ -436,7 +436,7 @@ __inslc((port),(addr),(count)) : \ __insl((port),(addr),(count))) -#define IO_SPACE_LIMIT 0xffff +#define IO_SPACE_LIMIT 0xffffffff /* * The caches on some architectures aren't dma-coherent and have need to
Quoted 3 lines · Jun Sun
Currently
IO_SPACE_LIMITis0xffff, which is probably borrowed from the legacy i386 code. Let us remove that limit, so that each machine does not have to laboriously reset it.
ISA?
Ralf
Quoted 10 lines · Ralf Baechle
Quoted 3 lines · Jun Sun
Currently
IO_SPACE_LIMITis0xffff, which is probably borrowed from the legacy i386 code. Let us remove that limit, so that each machine does not have to laboriously reset it.ISA?
Ralf
ISA bus?
The PCI IO space essentially extends the ISA bus, which effectively removes the 0xffff limits.
If you are really paranoid, we can do something like this:
#if defined(CONFIG_ISA) && !defined(CONFIG_PCI)
#define IO_SPACE_LIMIT 0xffff
#else
#define IO_SPACE_LIMIT 0xffffffff
#endif
Jun
Quoted 2 lines · Jun Sun
The PCI IO space essentially extends the ISA bus, which effectively removes the
0xfffflimits.
Note that while there is usually no problem with using addresses beyond
64kB in the PCI I/O space, certain PCI-to-PCI bridges may not pass such accesses across. So it's best to avoid assigning and using them. That's why Linux remaps "high" I/O space resources on Alpha, which get set up for some systems by the SRM console (firmware), e.g. in the system I was using a few years ago, SRM used to assign addresses around 0x11000 and 0x12000 for the onboard network and SCSI devices, IIRC.
Signature · 3 lines
+ Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: [email protected], PGP key available +
Quoted 11 lines · Maciej W. Rozycki
Quoted 2 lines · Jun Sun
The PCI IO space essentially extends the ISA bus, which effectively removes the
0xfffflimits.Note that while there is usually no problem with using addresses beyond
64kB in the PCI I/O space, certain PCI-to-PCI bridges may not pass such accesses across. So it's best to avoid assigning and using them. That's why Linux remaps "high" I/O space resources on Alpha, which get set up for some systems by the SRM console (firmware), e.g. in the system I was using a few years ago, SRM used to assign addresses around0x11000and0x12000for the onboard network and SCSI devices, IIRC.
Shouldn't that be reflected in the bridge's bus resources (pci_bus.resource[])? Then the PCI resource validation/assignment code will (re)assign them when necessary.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) [email protected] ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium
Quoted 1 line · Geert Uytterhoeven
Shouldn't that be reflected in the bridge's bus resources (pci_bus.resource[])?
No idea -- if you write so then you are probably right. I was told of
the problem at about 2.1.85 and I haven't investigated it further. Our PCI handling code wasn't so brillant as it is now, I guess.
Quoted 2 lines
Then the PCI resource validation/assignment code will (re)assign them when necessary.
Excellent.
Signature · 3 lines
+ Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: [email protected], PGP key available +
Quoted 6 lines · Maciej W. Rozycki
Quoted 2 lines · Jun Sun
The PCI IO space essentially extends the ISA bus, which effectively removes the
0xfffflimits.
Quoted 8 lines
Note that while there is usually no problem with using addresses beyond
64kB in the PCI I/O space, certain PCI-to-PCI bridges may not pass such accesses across. So it's best to avoid assigning and using them. That's why Linux remaps "high" I/O space resources on Alpha, which get set up for some systems by the SRM console (firmware), e.g. in the system I was using a few years ago, SRM used to assign addresses around0x11000and0x12000for the onboard network and SCSI devices, IIRC.
I would not normally assign IO space above 0xffff either. But recently I found multiple PCI buses, especially dual PCI buses, are getting popular, as examplified by two Gallelio chips and the new NEC Vrc5477 chips.
Since all drivers share the same mips_io_port_base, - even though the devices may be on different PCI buses - we need to assign the PCI IO windows contiguously so that drivers can share the same base address. In most such setups, you will get more than 0xffff IO ranges.
Jun
Quoted 8 lines · Jun Sun
I would not normally assign IO space above
0xffffeither. But recently I found multiple PCI buses, especially dual PCI buses, are getting popular, as examplified by two Gallelio chips and the new NEC Vrc5477 chips.Since all drivers share the same
mips_io_port_base, - even though the devices may be on different PCI buses - we need to assign the PCI IO windows contiguously so that drivers can share the same base address. In most such setups, you will get more than0xffffIO ranges.
After some discussion with some of the Linux PCI guys I think we should try to avoid extend the per-bus I/O address space beyond 64k ports. This is not a very strong ``should avoid'', though. The primary concern is a number of broken peripheral chips which apparently are floating around out there in good numbers.
Another reason to not extend the PCI-bus address range to 4g ports is the size of the available physical address space in the main processor's address space itself. Limited by the 32-bit address space we can only address a limited number via in/out anyway, so we better shouldn't fake what we ain't got (cited freely after Seymoure Cray), so 4g ports is silly anyway.
Ralf