Skip to contentSkip to conversation

MCradiolists: line 2: syntax error near unexpected token

DISCUSSION Jesper Juhl 2 participants 3 messages May 9, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I just unpacked a fresh copy of 2.4.4 and patched it to 2.4.5pre1 and ran into a problem. When I attempt to change the type (through menuconfig) of CPU to compile for, the following gets dumped to the console:

-----[ Start of screendump ]-----

scripts/Menuconfig: CONFIG_M386: command not found
scripts/Menuconfig: ./MCradiolists: line 2: syntax error near unexpected token `Pentium-III/Celeron(C'
scripts/Menuconfig: ./MCradiolists: line 2: ` function CONFIG_M386 ()
{ l_choice 'Processor
family' "386 CONFIG_M386 486

                                CONFIG_M486    586/K5/5x86/6x86/6x86MX 
               CONFIG_M586      Pentium-Classic 

CONFIG_M586TSC Pentium-MMX CONFIG_M586MMX Pentium-Pro/Celeron/Pentium-II CONFIG_M686 Pentium-III/Celeron(Coppermine) CONFIG_MPENTIUMIII Pentium-4 CONFIG_MPENTIUM4 K6/K6-II/K6-III
CONFIG_MK6 Athlon/Duron/K7
CONFIG_MK7 Crusoe CONFIG_MCRUSOE
Winchip-C6 CONFIG_MWINCHIPC6
Winchip-2 CONFIG_MWINCHIP2 Winchip-2A/Winchip-3CONFIG_MWINCHIP3D CyrixIII/C3
CONFIG_MCYRIXIII" Pentium-III/Celeron(Coppermine) ;}'

-----[ End of screendump ]-----

Every other part of menuconfig seems to work well enough, and that's probably the reason I've not noticed this before (this is the first time I've tried configuring 2.4.5pre1 on a box where I've had to change the CPU setting). I hope someone will find this info usefull :-)

If this is just some silly error on my part, then I appologize in advance for wasting your time.

Some info about my system:

Thinkpad 600 with heavily patched Slackware Linux 7.1

Output from ver_linux :

Linux jju 2.2.17-mosix #4 Sun Oct 22 21:33:26 CEST 2000 i586 unknown

Gnu C                  2.95.3
Gnu make               3.79.1
binutils               2.10.1.0.4
util-linux             2.11b
mount                  2.11b
modutils               2.4.5
e2fsprogs              1.19
pcmcia-cs              3.1.19
Linux C Library        2.2.2
ldd: version 1.9.9
Procps                 2.0.7
Net-tools              1.52
Kbd                    0.99
Sh-utils               2.0
Modules Loaded         soundcore tulip_cb cb_enabler ds i82365 pcmcia_core bsd_comp ppp slhc

Best regards,
Jesper Juhl - [email protected]

#1 lore raw
Quoted 4 lines

I just unpacked a fresh copy of 2.4.4 and patched it to 2.4.5pre1 and ran into a problem. When I attempt to change the type (through menuconfig) of CPU to compile for, the following gets dumped to the console:

Grab the menuconfig diff from the -ac patches . Menuconfig had a bug in bracket handling the new config file tripped

#2 lore raw
Quoted 4 lines · Alan Cox
Quoted 1 line

I just unpacked a fresh copy of 2.4.4 and patched it to 2.4.5pre1 and ran into a problem. When I attempt to change the type (through menuconfig) of CPU to compile for, the following gets dumped to the console:

Grab the menuconfig diff from the -ac patches . Menuconfig had a bug in bracket handling the new config file tripped

I extracted the menuconfig related parts from 2.4.4-ac6 and applied them - with 100% success... I can now select the CPU type.

Thank you!

Best regards,
Jesper Juhl - [email protected]